From: Linus Walleij Date: Mon, 3 Feb 2014 13:57:22 +0000 (+0100) Subject: ARM: ux500: move AB8500 PWM out settings to device tree X-Git-Tag: next-20140306~110^2~19^2~1^2~7 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e2377c8107e33ac4ace7ec7ee86101d7c70fbbf9;p=karo-tx-linux.git ARM: ux500: move AB8500 PWM out settings to device tree This moves the muxing and biasing of the AB8500 PWM output pins over to the device tree for affected platforms. Cc: Patrice Chotard Cc: Lee Jones Signed-off-by: Linus Walleij --- diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi index 2b548e90878e..cdf2b3fd22dc 100644 --- a/arch/arm/boot/dts/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi @@ -32,7 +32,8 @@ <&gpio42_default_mode>, <&gpio26_default_mode>, <&gpio35_default_mode>, - <&ycbcr_default_mode>; + <&ycbcr_default_mode>, + <&pwm_default_mode>; /* * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42 @@ -267,6 +268,21 @@ }; }; }; + /* This sets up the PWM pins 14 and 15 */ + pwm { + pwm_default_mode: pwm_default { + default_mux { + ste,function = "pwmout"; + ste,pins = "pwmout1_d_1", "pwmout2_d_1"; + }; + default_cfg { + ste,pins = "GPIO14_F14", + "GPIO15_B17"; + input-enable; + bias-pull-down; + }; + }; + }; }; }; }; diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index d58513b08a6d..b75089faf956 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -56,16 +56,6 @@ static struct pinctrl_map __initdata ab8500_pinmap[] = { AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), - /* - * pins 14,15 are muxed in PWM1 and PWM2 - * configured in INPUT PULL DOWN - */ - AB8500_MUX_HOG("pwmout1_d_1", "pwmout"), - AB8500_PIN_HOG("GPIO14_F14", in_pd), - - AB8500_MUX_HOG("pwmout2_d_1", "pwmout"), - AB8500_PIN_HOG("GPIO15_B17", in_pd), - /* * pins 17,18,19 and 20 are muxed in AUDIO interface 1 * configured in INPUT PULL DOWN