From: Arun Ramamurthy Date: Tue, 26 May 2015 20:08:17 +0000 (-0700) Subject: pwm: bcm-kona: Don't set polarity in probe X-Git-Tag: v4.2-rc1~159^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e23db65f3dac944d51ba97c8c03a17cfc12390cd;p=karo-tx-linux.git pwm: bcm-kona: Don't set polarity in probe Omit setting the polarity to normal during probe and instead use the new pwmchip_add_with_polarity() function to register a PWM chip with inverse polarity by default for all channels to reflect the hardware default. Signed-off-by: Arun Ramamurthy Reviewed-by: Ray Jui Signed-off-by: Scott Branden Signed-off-by: Tim Kryger Signed-off-by: Jonathan Richardson [thierry.reding@gmail.com: use pwmchip_add_with_polarity()] Signed-off-by: Thierry Reding --- diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c index 02bc048892a9..7af8fea2dc5b 100644 --- a/drivers/pwm/pwm-bcm-kona.c +++ b/drivers/pwm/pwm-bcm-kona.c @@ -266,18 +266,15 @@ static int kona_pwmc_probe(struct platform_device *pdev) return ret; } - /* Set smooth mode, push/pull, and normal polarity for all channels */ - for (chan = 0; chan < kp->chip.npwm; chan++) { - value |= (1 << PWM_CONTROL_SMOOTH_SHIFT(chan)); + /* Set push/pull for all channels */ + for (chan = 0; chan < kp->chip.npwm; chan++) value |= (1 << PWM_CONTROL_TYPE_SHIFT(chan)); - value |= (1 << PWM_CONTROL_POLARITY_SHIFT(chan)); - } writel(value, kp->base + PWM_CONTROL_OFFSET); clk_disable_unprepare(kp->clk); - ret = pwmchip_add(&kp->chip); + ret = pwmchip_add_with_polarity(&kp->chip, PWM_POLARITY_INVERSED); if (ret < 0) dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);