From: Jean Delvare Date: Thu, 12 Mar 2009 12:36:39 +0000 (+0100) Subject: hwmon: (it87) Properly decode -128 degrees C temperature X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e267d25005c861fe6afda343f044536342c9f8b4;p=linux-beck.git hwmon: (it87) Properly decode -128 degrees C temperature The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare --- diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 95a99c590da2..9157247fed8e 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -213,7 +213,7 @@ static inline u16 FAN16_TO_REG(long rpm) #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ ((val)+500)/1000),-128,127)) -#define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) +#define TEMP_FROM_REG(val) ((val) * 1000) #define PWM_TO_REG(val) ((val) >> 1) #define PWM_FROM_REG(val) (((val)&0x7f) << 1) @@ -267,9 +267,9 @@ struct it87_data { u8 has_fan; /* Bitfield, fans enabled */ u16 fan[5]; /* Register values, possibly combined */ u16 fan_min[5]; /* Register values, possibly combined */ - u8 temp[3]; /* Register value */ - u8 temp_high[3]; /* Register value */ - u8 temp_low[3]; /* Register value */ + s8 temp[3]; /* Register value */ + s8 temp_high[3]; /* Register value */ + s8 temp_low[3]; /* Register value */ u8 sensor; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */