From: Tirumala Marri Date: Mon, 21 Dec 2009 22:49:41 +0000 (+0000) Subject: powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC. X-Git-Tag: v2.6.35-rc2~55^2~2^2~4 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e2efc09e52680cecb0ca624e379cb4b4c56157c3;p=karo-tx-linux.git powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC. Add support for PCI-e on the AMCC 460SX boards Signed-off-by: Tirumala Marri Acked-by: Josh Boyer --- diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts index d2af32e2bf7a..81636c01d906 100644 --- a/arch/powerpc/boot/dts/redwood.dts +++ b/arch/powerpc/boot/dts/redwood.dts @@ -234,10 +234,132 @@ has-inverted-stacr-oc; has-new-stacr-staopc; }; + }; + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + /* This drives busses 10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x30 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; }; + chosen { linux,stdout-path = "/plb/opb/serial@ef600200"; }; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 106d767bf65b..156aa7d36258 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -974,6 +974,123 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = .setup_utl = ppc460ex_pciex_init_utl, }; +static int __init ppc460sx_pciex_core_init(struct device_node *np) +{ + /* HSS drive amplitude */ + mtdcri(SDR0, PESDR0_460SX_HSSL0DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL1DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL2DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL3DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL4DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL5DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL6DAMP, 0xB9843211); + mtdcri(SDR0, PESDR0_460SX_HSSL7DAMP, 0xB9843211); + + mtdcri(SDR0, PESDR1_460SX_HSSL0DAMP, 0xB9843211); + mtdcri(SDR0, PESDR1_460SX_HSSL1DAMP, 0xB9843211); + mtdcri(SDR0, PESDR1_460SX_HSSL2DAMP, 0xB9843211); + mtdcri(SDR0, PESDR1_460SX_HSSL3DAMP, 0xB9843211); + + mtdcri(SDR0, PESDR2_460SX_HSSL0DAMP, 0xB9843211); + mtdcri(SDR0, PESDR2_460SX_HSSL1DAMP, 0xB9843211); + mtdcri(SDR0, PESDR2_460SX_HSSL2DAMP, 0xB9843211); + mtdcri(SDR0, PESDR2_460SX_HSSL3DAMP, 0xB9843211); + + /* HSS TX pre-emphasis */ + mtdcri(SDR0, PESDR0_460SX_HSSL0COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL1COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL2COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL3COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL4COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL5COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL6COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR0_460SX_HSSL7COEFA, 0xDCB98987); + + mtdcri(SDR0, PESDR1_460SX_HSSL0COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR1_460SX_HSSL1COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR1_460SX_HSSL2COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR1_460SX_HSSL3COEFA, 0xDCB98987); + + mtdcri(SDR0, PESDR2_460SX_HSSL0COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR2_460SX_HSSL1COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR2_460SX_HSSL2COEFA, 0xDCB98987); + mtdcri(SDR0, PESDR2_460SX_HSSL3COEFA, 0xDCB98987); + + /* HSS TX calibration control */ + mtdcri(SDR0, PESDR0_460SX_HSSL1CALDRV, 0x22222222); + mtdcri(SDR0, PESDR1_460SX_HSSL1CALDRV, 0x22220000); + mtdcri(SDR0, PESDR2_460SX_HSSL1CALDRV, 0x22220000); + + /* HSS TX slew control */ + mtdcri(SDR0, PESDR0_460SX_HSSSLEW, 0xFFFFFFFF); + mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000); + mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000); + + udelay(100); + + /* De-assert PLLRESET */ + dcri_clrset(SDR0, PESDR0_PLLLCT2, 0x00000100, 0); + + /* Reset DL, UTL, GPL before configuration */ + mtdcri(SDR0, PESDR0_460SX_RCSSET, + PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU); + mtdcri(SDR0, PESDR1_460SX_RCSSET, + PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU); + mtdcri(SDR0, PESDR2_460SX_RCSSET, + PESDRx_RCSSET_RSTDL | PESDRx_RCSSET_RSTGU); + + udelay(100); + + /* + * If bifurcation is not enabled, u-boot would have disabled the + * third PCIe port + */ + if (((mfdcri(SDR0, PESDR1_460SX_HSSCTLSET) & 0x00000001) == + 0x00000001)) { + printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n"); + printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n"); + return 3; + } + + printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n"); + return 2; +} + +static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + + if (port->endpoint) + dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2, + 0x01000000, 0); + else + dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2, + 0, 0x01000000); + + /*Gen-1*/ + mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000); + + dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL), + PESDRx_RCSSET_RSTPYN); + + port->has_ibpre = 1; + + return 0; +} + +static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + /* Max 128 Bytes */ + out_be32 (port->utl_base + PEUTL_PBBSZ, 0x00000000); + return 0; +} + +static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = { + .core_init = ppc460sx_pciex_core_init, + .port_init_hw = ppc460sx_pciex_init_port_hw, + .setup_utl = ppc460sx_pciex_init_utl, +}; + #endif /* CONFIG_44x */ #ifdef CONFIG_40x @@ -1089,6 +1206,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) } if (of_device_is_compatible(np, "ibm,plb-pciex-460ex")) ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops; + if (of_device_is_compatible(np, "ibm,plb-pciex-460sx")) + ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops; #endif /* CONFIG_44x */ #ifdef CONFIG_40x if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h index d04e40b306fb..56d9e5deccbf 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.h +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -323,6 +323,64 @@ #define PESDR0_460EX_IHS1 0x036C #define PESDR0_460EX_IHS2 0x036D +/* + * 460SX addtional DCRs + */ +#define PESDRn_460SX_RCEI 0x02 + +#define PESDR0_460SX_HSSL0DAMP 0x320 +#define PESDR0_460SX_HSSL1DAMP 0x321 +#define PESDR0_460SX_HSSL2DAMP 0x322 +#define PESDR0_460SX_HSSL3DAMP 0x323 +#define PESDR0_460SX_HSSL4DAMP 0x324 +#define PESDR0_460SX_HSSL5DAMP 0x325 +#define PESDR0_460SX_HSSL6DAMP 0x326 +#define PESDR0_460SX_HSSL7DAMP 0x327 + +#define PESDR1_460SX_HSSL0DAMP 0x354 +#define PESDR1_460SX_HSSL1DAMP 0x355 +#define PESDR1_460SX_HSSL2DAMP 0x356 +#define PESDR1_460SX_HSSL3DAMP 0x357 + +#define PESDR2_460SX_HSSL0DAMP 0x384 +#define PESDR2_460SX_HSSL1DAMP 0x385 +#define PESDR2_460SX_HSSL2DAMP 0x386 +#define PESDR2_460SX_HSSL3DAMP 0x387 + +#define PESDR0_460SX_HSSL0COEFA 0x328 +#define PESDR0_460SX_HSSL1COEFA 0x329 +#define PESDR0_460SX_HSSL2COEFA 0x32A +#define PESDR0_460SX_HSSL3COEFA 0x32B +#define PESDR0_460SX_HSSL4COEFA 0x32C +#define PESDR0_460SX_HSSL5COEFA 0x32D +#define PESDR0_460SX_HSSL6COEFA 0x32E +#define PESDR0_460SX_HSSL7COEFA 0x32F + +#define PESDR1_460SX_HSSL0COEFA 0x358 +#define PESDR1_460SX_HSSL1COEFA 0x359 +#define PESDR1_460SX_HSSL2COEFA 0x35A +#define PESDR1_460SX_HSSL3COEFA 0x35B + +#define PESDR2_460SX_HSSL0COEFA 0x388 +#define PESDR2_460SX_HSSL1COEFA 0x389 +#define PESDR2_460SX_HSSL2COEFA 0x38A +#define PESDR2_460SX_HSSL3COEFA 0x38B + +#define PESDR0_460SX_HSSL1CALDRV 0x339 +#define PESDR1_460SX_HSSL1CALDRV 0x361 +#define PESDR2_460SX_HSSL1CALDRV 0x391 + +#define PESDR0_460SX_HSSSLEW 0x338 +#define PESDR1_460SX_HSSSLEW 0x360 +#define PESDR2_460SX_HSSSLEW 0x390 + +#define PESDR0_460SX_HSSCTLSET 0x31E +#define PESDR1_460SX_HSSCTLSET 0x352 +#define PESDR2_460SX_HSSCTLSET 0x382 + +#define PESDR0_460SX_RCSSET 0x304 +#define PESDR1_460SX_RCSSET 0x344 +#define PESDR2_460SX_RCSSET 0x374 /* * Of the above, some are common offsets from the base */