From: Aisheng Dong Date: Wed, 27 Aug 2014 07:26:30 +0000 (+0800) Subject: mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC X-Git-Tag: v3.18-rc1~98^2~58 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e33eb8e2818c9a7b41bac68a1c83ee4c136af9ba;p=karo-tx-linux.git mmc: sdhci-esdhc-imx: set the correct max timeout value for uSDHC The default sdhci driver write 0xE into timeout counter register to set the maximum timeout. The value is not correct for uSDHC since the max counter value for uSDHC is 0xF. Instead of using common timeout code in sdhci, we implement esdhc_set_timeout to handle the difference between eSDHC and uSDHC. Currently we simply set the max timeout value as before. But in the future, we probably may implement IMX specific timeout setting algorithm and use suitable timeout for different CMDs. Reviewed-by: Shawn Guo Signed-off-by: Dong Aisheng Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 546ed02c4fcf..587ee0edeb57 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -888,6 +888,16 @@ static unsigned int esdhc_get_max_timeout_count(struct sdhci_host *host) return esdhc_is_usdhc(imx_data) ? 1 << 28 : 1 << 27; } +static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + + /* use maximum timeout counter */ + sdhci_writeb(host, esdhc_is_usdhc(imx_data) ? 0xF : 0xE, + SDHCI_TIMEOUT_CONTROL); +} + static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, @@ -899,6 +909,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { .get_min_clock = esdhc_pltfm_get_min_clock, .get_max_timeout_count = esdhc_get_max_timeout_count, .get_ro = esdhc_pltfm_get_ro, + .set_timeout = esdhc_set_timeout, .set_bus_width = esdhc_pltfm_set_bus_width, .set_uhs_signaling = esdhc_set_uhs_signaling, .reset = esdhc_reset,