From: Vincent Palatin Date: Mon, 1 Aug 2016 09:54:37 +0000 (+0200) Subject: platform/chrome: Introduce a new function to check EC features. X-Git-Tag: v4.10-rc1~148^2~367^2~15^2~2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e4244ebddae27e9200146bba897f12a3950ce722;p=karo-tx-linux.git platform/chrome: Introduce a new function to check EC features. Use the EC_CMD_GET_FEATURES message to check the supported features for each MCU. Signed-off-by: Vincent Palatin [tomeu: adapted to changes in mainline] Signed-off-by: Tomeu Vizoso [enric: remove references to USB PD feature and do it more generic] Signed-off-by: Enric Balletbo i Serra Reviewed-by: Guenter Roeck For the MFD changes: Acked-by: Lee Jones Signed-off-by: Jonathan Cameron --- diff --git a/drivers/platform/chrome/cros_ec_dev.c b/drivers/platform/chrome/cros_ec_dev.c index 8abd80dbcbed..7eb53078b03d 100644 --- a/drivers/platform/chrome/cros_ec_dev.c +++ b/drivers/platform/chrome/cros_ec_dev.c @@ -87,6 +87,41 @@ exit: return ret; } +static int cros_ec_check_features(struct cros_ec_dev *ec, int feature) +{ + struct cros_ec_command *msg; + int ret; + + if (ec->features[0] == -1U && ec->features[1] == -1U) { + /* features bitmap not read yet */ + + msg = kmalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->version = 0; + msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset; + msg->insize = sizeof(ec->features); + msg->outsize = 0; + + ret = cros_ec_cmd_xfer(ec->ec_dev, msg); + if (ret < 0 || msg->result != EC_RES_SUCCESS) { + dev_warn(ec->dev, "cannot get EC features: %d/%d\n", + ret, msg->result); + memset(ec->features, 0, sizeof(ec->features)); + } + + memcpy(ec->features, msg->data, sizeof(ec->features)); + + dev_dbg(ec->dev, "EC features %08x %08x\n", + ec->features[0], ec->features[1]); + + kfree(msg); + } + + return ec->features[feature / 32] & EC_FEATURE_MASK_0(feature); +} + /* Device file ops */ static int ec_device_open(struct inode *inode, struct file *filp) { @@ -245,6 +280,8 @@ static int ec_device_probe(struct platform_device *pdev) ec->ec_dev = dev_get_drvdata(dev->parent); ec->dev = dev; ec->cmd_offset = ec_platform->cmd_offset; + ec->features[0] = -1U; /* Not cached yet */ + ec->features[1] = -1U; /* Not cached yet */ device_initialize(&ec->class_dev); cdev_init(&ec->cdev, &fops); diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 1f85b7aff097..f62043a75f43 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -184,6 +184,7 @@ struct cros_ec_dev { struct cros_ec_device *ec_dev; struct device *dev; u16 cmd_offset; + u32 features[2]; }; /** diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 8826e0f64b0e..1683003603f3 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -713,6 +713,90 @@ struct ec_response_get_set_value { /* More than one command can use these structs to get/set paramters. */ #define EC_CMD_GSV_PAUSE_IN_S5 0x0c +/*****************************************************************************/ +/* List the features supported by the firmware */ +#define EC_CMD_GET_FEATURES 0x0d + +/* Supported features */ +enum ec_feature_code { + /* + * This image contains a limited set of features. Another image + * in RW partition may support more features. + */ + EC_FEATURE_LIMITED = 0, + /* + * Commands for probing/reading/writing/erasing the flash in the + * EC are present. + */ + EC_FEATURE_FLASH = 1, + /* + * Can control the fan speed directly. + */ + EC_FEATURE_PWM_FAN = 2, + /* + * Can control the intensity of the keyboard backlight. + */ + EC_FEATURE_PWM_KEYB = 3, + /* + * Support Google lightbar, introduced on Pixel. + */ + EC_FEATURE_LIGHTBAR = 4, + /* Control of LEDs */ + EC_FEATURE_LED = 5, + /* Exposes an interface to control gyro and sensors. + * The host goes through the EC to access these sensors. + * In addition, the EC may provide composite sensors, like lid angle. + */ + EC_FEATURE_MOTION_SENSE = 6, + /* The keyboard is controlled by the EC */ + EC_FEATURE_KEYB = 7, + /* The AP can use part of the EC flash as persistent storage. */ + EC_FEATURE_PSTORE = 8, + /* The EC monitors BIOS port 80h, and can return POST codes. */ + EC_FEATURE_PORT80 = 9, + /* + * Thermal management: include TMP specific commands. + * Higher level than direct fan control. + */ + EC_FEATURE_THERMAL = 10, + /* Can switch the screen backlight on/off */ + EC_FEATURE_BKLIGHT_SWITCH = 11, + /* Can switch the wifi module on/off */ + EC_FEATURE_WIFI_SWITCH = 12, + /* Monitor host events, through for example SMI or SCI */ + EC_FEATURE_HOST_EVENTS = 13, + /* The EC exposes GPIO commands to control/monitor connected devices. */ + EC_FEATURE_GPIO = 14, + /* The EC can send i2c messages to downstream devices. */ + EC_FEATURE_I2C = 15, + /* Command to control charger are included */ + EC_FEATURE_CHARGER = 16, + /* Simple battery support. */ + EC_FEATURE_BATTERY = 17, + /* + * Support Smart battery protocol + * (Common Smart Battery System Interface Specification) + */ + EC_FEATURE_SMART_BATTERY = 18, + /* EC can dectect when the host hangs. */ + EC_FEATURE_HANG_DETECT = 19, + /* Report power information, for pit only */ + EC_FEATURE_PMU = 20, + /* Another Cros EC device is present downstream of this one */ + EC_FEATURE_SUB_MCU = 21, + /* Support USB Power delivery (PD) commands */ + EC_FEATURE_USB_PD = 22, + /* Control USB multiplexer, for audio through USB port for instance. */ + EC_FEATURE_USB_MUX = 23, + /* Motion Sensor code has an internal software FIFO */ + EC_FEATURE_MOTION_SENSE_FIFO = 24, +}; + +#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32)) +#define EC_FEATURE_MASK_1(event_code) (1UL << (event_code - 32)) +struct ec_response_get_features { + uint32_t flags[2]; +} __packed; /*****************************************************************************/ /* Flash commands */