From: Ron Mercer Date: Tue, 9 Jun 2009 05:39:32 +0000 (+0000) Subject: qlge: Add support for varied pcie function numbers. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e4552f51ceefcf51b79c5bf8dafc7abb4bb7657d;p=linux-beck.git qlge: Add support for varied pcie function numbers. Currently we support only PCIe NIC functions zero and one, and FCoE functions as 3 and 4. Future configurations can mix these up in any fashion. This patch removes the 0-1 dependancy and allows usage of any of the 4 functions. We also find the alternate NIC function (if exist) and determine our port number based on the comparison of the two functions: Lower function number gets first port, higher function gets second port. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index 258ef449ea88..5eb52ca08980 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -65,6 +65,17 @@ #define DB_PAGE_SIZE 4096 +/* MPI test register definitions. This register + * is used for determining alternate NIC function's + * PCI->func number. + */ +enum { + MPI_TEST_FUNC_PORT_CFG = 0x1002, + MPI_TEST_NIC1_FUNC_SHIFT = 1, + MPI_TEST_NIC2_FUNC_SHIFT = 5, + MPI_TEST_NIC_FUNC_MASK = 0x00000007, +}; + /* * Processor Address Register (PROC_ADDR) bit definitions. */ @@ -1432,6 +1443,8 @@ struct ql_adapter { u32 chip_rev_id; u32 fw_rev_id; u32 func; /* PCI function for this adapter */ + u32 alt_func; /* PCI function for alternate adapter */ + u32 port; /* Port number this adapter */ spinlock_t adapter_lock; spinlock_t hw_lock; @@ -1581,6 +1594,7 @@ void ql_mpi_idc_work(struct work_struct *work); void ql_mpi_port_cfg_work(struct work_struct *work); int ql_mb_get_fw_state(struct ql_adapter *qdev); int ql_cam_route_initialize(struct ql_adapter *qdev); +int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data); int ql_mb_about_fw(struct ql_adapter *qdev); #if 1 diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index d6517eb5bc1d..5055f5b37a73 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -680,7 +680,7 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev) /* Get flash offset for function and adjust * for dword access. */ - if (!qdev->func) + if (!qdev->port) offset = FUNC0_FLASH_OFFSET / sizeof(u32); else offset = FUNC1_FLASH_OFFSET / sizeof(u32); @@ -744,7 +744,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev) /* Second function's parameters follow the first * function's. */ - if (qdev->func) + if (qdev->port) offset = size; if (ql_sem_spinlock(qdev, SEM_FLASH_MASK)) @@ -3220,9 +3220,10 @@ static void ql_display_dev_info(struct net_device *ndev) struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev); QPRINTK(qdev, PROBE, INFO, - "Function #%d, NIC Roll %d, NIC Rev = %d, " + "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, " "XG Roll = %d, XG Rev = %d.\n", qdev->func, + qdev->port, qdev->chip_rev_id & 0x0000000f, qdev->chip_rev_id >> 4 & 0x0000000f, qdev->chip_rev_id >> 8 & 0x0000000f, @@ -3677,12 +3678,53 @@ static struct nic_operations qla8000_nic_ops = { .port_initialize = ql_8000_port_initialize, }; +/* Find the pcie function number for the other NIC + * on this chip. Since both NIC functions share a + * common firmware we have the lowest enabled function + * do any common work. Examples would be resetting + * after a fatal firmware error, or doing a firmware + * coredump. + */ +static int ql_get_alt_pcie_func(struct ql_adapter *qdev) +{ + int status = 0; + u32 temp; + u32 nic_func1, nic_func2; + + status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG, + &temp); + if (status) + return status; + + nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) & + MPI_TEST_NIC_FUNC_MASK); + nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) & + MPI_TEST_NIC_FUNC_MASK); + + if (qdev->func == nic_func1) + qdev->alt_func = nic_func2; + else if (qdev->func == nic_func2) + qdev->alt_func = nic_func1; + else + status = -EIO; + + return status; +} -static void ql_get_board_info(struct ql_adapter *qdev) +static int ql_get_board_info(struct ql_adapter *qdev) { + int status; qdev->func = (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT; - if (qdev->func) { + if (qdev->func > 3) + return -EIO; + + status = ql_get_alt_pcie_func(qdev); + if (status) + return status; + + qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1; + if (qdev->port) { qdev->xg_sem_mask = SEM_XGMAC1_MASK; qdev->port_link_up = STS_PL1; qdev->port_init = STS_PI1; @@ -3701,6 +3743,7 @@ static void ql_get_board_info(struct ql_adapter *qdev) qdev->nic_ops = &qla8012_nic_ops; else if (qdev->device_id == QLGE_DEVICE_ID_8000) qdev->nic_ops = &qla8000_nic_ops; + return status; } static void ql_release_all(struct pci_dev *pdev) @@ -3795,7 +3838,12 @@ static int __devinit ql_init_device(struct pci_dev *pdev, qdev->ndev = ndev; qdev->pdev = pdev; - ql_get_board_info(qdev); + err = ql_get_board_info(qdev); + if (err) { + dev_err(&pdev->dev, "Register access failed.\n"); + err = -EIO; + goto err_out; + } qdev->msg_enable = netif_msg_init(debug, default_msg); spin_lock_init(&qdev->hw_lock); spin_lock_init(&qdev->stats_lock);