From: Dietmar Eggemann Date: Wed, 26 Sep 2012 16:28:47 +0000 (+0100) Subject: ARM: hw_breakpoint: use CRn as argument for debug reg accessor macros X-Git-Tag: next-20121016~69^2^2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e51ad148df513119cc0e4d9d3ddeabaf93a16842;p=karo-tx-linux.git ARM: hw_breakpoint: use CRn as argument for debug reg accessor macros The coprocessor register CRn for accesses to the debug register can be a different one than C0. Take this into account for the ARM_DBG_READ and the ARM_DBG_WRITE macro. The inline assembler calls which used a coprocessor register CRn other than C0 are replaced by the ARM_DBG_READ or ARM_DBG_WRITE macro. Signed-off-by: Dietmar Eggemann Signed-off-by: Will Deacon --- diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h index c190bc992f0e..01169dd723f1 100644 --- a/arch/arm/include/asm/hw_breakpoint.h +++ b/arch/arm/include/asm/hw_breakpoint.h @@ -98,12 +98,12 @@ static inline void decode_ctrl_reg(u32 reg, #define ARM_BASE_WCR 112 /* Accessor macros for the debug registers. */ -#define ARM_DBG_READ(M, OP2, VAL) do {\ - asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\ +#define ARM_DBG_READ(N, M, OP2, VAL) do {\ + asm volatile("mrc p14, 0, %0, " #N "," #M ", " #OP2 : "=r" (VAL));\ } while (0) -#define ARM_DBG_WRITE(M, OP2, VAL) do {\ - asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\ +#define ARM_DBG_WRITE(N, M, OP2, VAL) do {\ + asm volatile("mcr p14, 0, %0, " #N "," #M ", " #OP2 : : "r" (VAL));\ } while (0) struct notifier_block; diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 3127ae4e4b33..05fdd6843795 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -52,14 +52,14 @@ static u8 debug_arch; /* Maximum supported watchpoint length. */ static u8 max_watchpoint_len; -#define READ_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_READ(c ## M, OP2, VAL); \ +#define READ_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_READ(c0, c ## M, OP2, VAL); \ break -#define WRITE_WB_REG_CASE(OP2, M, VAL) \ - case ((OP2 << 4) + M): \ - ARM_DBG_WRITE(c ## M, OP2, VAL);\ +#define WRITE_WB_REG_CASE(OP2, M, VAL) \ + case ((OP2 << 4) + M): \ + ARM_DBG_WRITE(c0, c ## M, OP2, VAL); \ break #define GEN_READ_WB_REG_CASES(OP2, VAL) \ @@ -140,7 +140,7 @@ static u8 get_debug_arch(void) "Assuming v6 debug is present.\n")) return ARM_DEBUG_ARCH_V6; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return (didr >> 16) & 0xf; } @@ -168,7 +168,7 @@ static int debug_exception_updates_fsr(void) static int get_num_wrp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 28) & 0xf) + 1; } @@ -176,7 +176,7 @@ static int get_num_wrp_resources(void) static int get_num_brp_resources(void) { u32 didr; - ARM_DBG_READ(c0, 0, didr); + ARM_DBG_READ(c0, c0, 0, didr); return ((didr >> 24) & 0xf) + 1; } @@ -230,14 +230,14 @@ static int get_num_brps(void) static int monitor_mode_enabled(void) { u32 dscr; - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); return !!(dscr & ARM_DSCR_MDBGEN); } static int enable_monitor_mode(void) { u32 dscr; - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); /* If monitor mode is already enabled, just return. */ if (dscr & ARM_DSCR_MDBGEN) @@ -247,11 +247,11 @@ static int enable_monitor_mode(void) switch (get_debug_arch()) { case ARM_DEBUG_ARCH_V6: case ARM_DEBUG_ARCH_V6_1: - ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c1, 0, (dscr | ARM_DSCR_MDBGEN)); break; case ARM_DEBUG_ARCH_V7_ECP14: case ARM_DEBUG_ARCH_V7_1: - ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN)); + ARM_DBG_WRITE(c0, c2, 2, (dscr | ARM_DSCR_MDBGEN)); isb(); break; default: @@ -259,7 +259,7 @@ static int enable_monitor_mode(void) } /* Check that the write made it through. */ - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN), "Failed to enable monitor mode on CPU %d.\n", smp_processor_id())) @@ -852,7 +852,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ - ARM_DBG_READ(c1, 0, dscr); + ARM_DBG_READ(c0, c1, 0, dscr); /* Perform perf callbacks. */ switch (ARM_DSCR_MOE(dscr)) { @@ -920,14 +920,14 @@ static void reset_ctrl_regs(void *unused) * Ensure sticky power-down is clear (i.e. debug logic is * powered up). */ - asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power)); + ARM_DBG_READ(c1, c5, 4, dbg_power); if ((dbg_power & 0x1) == 0) err = -EPERM; /* * Check whether we implement OS save and restore. */ - asm volatile("mrc p14, 0, %0, c1, c1, 4" : "=r" (dbg_power)); + ARM_DBG_READ(c1, c1, 4, dbg_power); if ((dbg_power & 0x9) == 0) goto clear_vcr; break; @@ -935,7 +935,7 @@ static void reset_ctrl_regs(void *unused) /* * Ensure the OS double lock is clear. */ - asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power)); + ARM_DBG_READ(c1, c3, 4, dbg_power); if ((dbg_power & 0x1) == 1) err = -EPERM; break; @@ -951,7 +951,7 @@ static void reset_ctrl_regs(void *unused) * Unconditionally clear the OS lock by writing a value * other than 0xC5ACCE55 to the access register. */ - asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0)); + ARM_DBG_WRITE(c1, c0, 4, 0); isb(); /* @@ -959,7 +959,7 @@ static void reset_ctrl_regs(void *unused) * enabling monitor mode. */ clear_vcr: - asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0)); + ARM_DBG_WRITE(c0, c7, 0, 0); isb(); if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {