From: Peter Zijlstra Date: Fri, 1 May 2009 10:23:19 +0000 (+0200) Subject: perf_counter: documentation update X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e5791a808ae91a9e7e1b65ea9b8de0f96a043d88;p=linux-beck.git perf_counter: documentation update Update the documentation to reflect the current state of affairs [ Impact: documentation update ] Signed-off-by: Peter Zijlstra Cc: Paul Mackerras Cc: Corey Ashford LKML-Reference: <20090501102533.296727903@chello.nl> Signed-off-by: Ingo Molnar --- diff --git a/Documentation/perf_counter/design.txt b/Documentation/perf_counter/design.txt index aaf105c02fba..9930c4bddc6f 100644 --- a/Documentation/perf_counter/design.txt +++ b/Documentation/perf_counter/design.txt @@ -34,41 +34,47 @@ can be poll()ed. When creating a new counter fd, 'perf_counter_hw_event' is: -/* - * Event to monitor via a performance monitoring counter: - */ struct perf_counter_hw_event { - __u64 event_config; - - __u64 irq_period; - __u64 record_type; - __u64 read_format; - - __u64 disabled : 1, /* off by default */ - nmi : 1, /* NMI sampling */ - inherit : 1, /* children inherit it */ - pinned : 1, /* must always be on PMU */ - exclusive : 1, /* only group on PMU */ - exclude_user : 1, /* don't count user */ - exclude_kernel : 1, /* ditto kernel */ - exclude_hv : 1, /* ditto hypervisor */ - exclude_idle : 1, /* don't count when idle */ - - __reserved_1 : 55; - - __u32 extra_config_len; - - __u32 __reserved_4; - __u64 __reserved_2; - __u64 __reserved_3; + /* + * The MSB of the config word signifies if the rest contains cpu + * specific (raw) counter configuration data, if unset, the next + * 7 bits are an event type and the rest of the bits are the event + * identifier. + */ + __u64 config; + + __u64 irq_period; + __u32 record_type; + __u32 read_format; + + __u64 disabled : 1, /* off by default */ + nmi : 1, /* NMI sampling */ + inherit : 1, /* children inherit it */ + pinned : 1, /* must always be on PMU */ + exclusive : 1, /* only group on PMU */ + exclude_user : 1, /* don't count user */ + exclude_kernel : 1, /* ditto kernel */ + exclude_hv : 1, /* ditto hypervisor */ + exclude_idle : 1, /* don't count when idle */ + mmap : 1, /* include mmap data */ + munmap : 1, /* include munmap data */ + comm : 1, /* include comm data */ + + __reserved_1 : 52; + + __u32 extra_config_len; + __u32 wakeup_events; /* wakeup every n events */ + + __u64 __reserved_2; + __u64 __reserved_3; }; -The 'event_config' field specifies what the counter should count. It +The 'config' field specifies what the counter should count. It is divided into 3 bit-fields: -raw_type: 1 bit (most significant bit) 0x8000_0000_0000_0000 -type: 7 bits (next most significant) 0x7f00_0000_0000_0000 -event_id: 56 bits (least significant) 0x00ff_0000_0000_0000 +raw_type: 1 bit (most significant bit) 0x8000_0000_0000_0000 +type: 7 bits (next most significant) 0x7f00_0000_0000_0000 +event_id: 56 bits (least significant) 0x00ff_ffff_ffff_ffff If 'raw_type' is 1, then the counter will count a hardware event specified by the remaining 63 bits of event_config. The encoding is @@ -134,41 +140,56 @@ enum sw_event_ids { PERF_COUNT_PAGE_FAULTS_MAJ = 6, }; +Counters of the type PERF_TYPE_TRACEPOINT are available when the ftrace event +tracer is available, and event_id values can be obtained from +/debug/tracing/events/*/*/id + + Counters come in two flavours: counting counters and sampling counters. A "counting" counter is one that is used for counting the number of events that occur, and is characterised by having -irq_period = 0 and record_type = PERF_RECORD_SIMPLE. A read() on a -counting counter simply returns the current value of the counter as -an 8-byte number. +irq_period = 0. + + +A read() on a counter returns the current value of the counter and possible +additional values as specified by 'read_format', each value is a u64 (8 bytes) +in size. + +/* + * Bits that can be set in hw_event.read_format to request that + * reads on the counter should return the indicated quantities, + * in increasing order of bit value, after the counter value. + */ +enum perf_counter_read_format { + PERF_FORMAT_TOTAL_TIME_ENABLED = 1, + PERF_FORMAT_TOTAL_TIME_RUNNING = 2, +}; + +Using these additional values one can establish the overcommit ratio for a +particular counter allowing one to take the round-robin scheduling effect +into account. + A "sampling" counter is one that is set up to generate an interrupt every N events, where N is given by 'irq_period'. A sampling counter -has irq_period > 0 and record_type != PERF_RECORD_SIMPLE. The -record_type controls what data is recorded on each interrupt, and the -available values are currently: +has irq_period > 0. The record_type controls what data is recorded on each +interrupt: /* - * IRQ-notification data record type: + * Bits that can be set in hw_event.record_type to request information + * in the overflow packets. */ -enum perf_counter_record_type { - PERF_RECORD_SIMPLE = 0, - PERF_RECORD_IRQ = 1, - PERF_RECORD_GROUP = 2, +enum perf_counter_record_format { + PERF_RECORD_IP = 1U << 0, + PERF_RECORD_TID = 1U << 1, + PERF_RECORD_TIME = 1U << 2, + PERF_RECORD_ADDR = 1U << 3, + PERF_RECORD_GROUP = 1U << 4, + PERF_RECORD_CALLCHAIN = 1U << 5, }; -A record_type value of PERF_RECORD_IRQ will record the instruction -pointer (IP) at which the interrupt occurred. A record_type value of -PERF_RECORD_GROUP will record the event_config and counter value of -all of the other counters in the group, and should only be used on a -group leader (see below). Currently these two values are mutually -exclusive, but record_type will become a bit-mask in future and -support other values. - -A sampling counter has an event queue, into which an event is placed -on each interrupt. A read() on a sampling counter will read the next -event from the event queue. If the queue is empty, the read() will -either block or return an EAGAIN error, depending on whether the fd -has been set to non-blocking mode or not. +Such (and other) events will be recorded in a ring-buffer, which is +available to user-space using mmap() (see below). The 'disabled' bit specifies whether the counter starts out disabled or enabled. If it is initially disabled, it can be enabled by ioctl @@ -206,6 +227,13 @@ The 'exclude_user', 'exclude_kernel' and 'exclude_hv' bits provide a way to request that counting of events be restricted to times when the CPU is in user, kernel and/or hypervisor mode. +The 'mmap' and 'munmap' bits allow recording of PROT_EXEC mmap/munmap +operations, these can be used to relate userspace IP addresses to actual +code, even after the mapping (or even the whole process) is gone, +these events are recorded in the ring-buffer (see below). + +The 'comm' bit allows tracking of process comm data on process creation. +This too is recorded in the ring-buffer (see below). The 'pid' parameter to the perf_counter_open() system call allows the counter to be specific to a task: @@ -250,6 +278,138 @@ can be meaningfully compared, added, divided (to get ratios), etc., with each other, since they have counted events for the same set of executed instructions. + +Like stated, asynchronous events, like counter overflow or PROT_EXEC mmap +tracking are logged into a ring-buffer. This ring-buffer is created and +accessed through mmap(). + +The mmap size should be 1+2^n pages, where the first page is a meta-data page +(struct perf_counter_mmap_page) that contains various bits of information such +as where the ring-buffer head is. + +/* + * Structure of the page that can be mapped via mmap + */ +struct perf_counter_mmap_page { + __u32 version; /* version number of this structure */ + __u32 compat_version; /* lowest version this is compat with */ + + /* + * Bits needed to read the hw counters in user-space. + * + * u32 seq; + * s64 count; + * + * do { + * seq = pc->lock; + * + * barrier() + * if (pc->index) { + * count = pmc_read(pc->index - 1); + * count += pc->offset; + * } else + * goto regular_read; + * + * barrier(); + * } while (pc->lock != seq); + * + * NOTE: for obvious reason this only works on self-monitoring + * processes. + */ + __u32 lock; /* seqlock for synchronization */ + __u32 index; /* hardware counter identifier */ + __s64 offset; /* add to hardware counter value */ + + /* + * Control data for the mmap() data buffer. + * + * User-space reading this value should issue an rmb(), on SMP capable + * platforms, after reading this value -- see perf_counter_wakeup(). + */ + __u32 data_head; /* head in the data section */ +}; + +NOTE: the hw-counter userspace bits are arch specific and are currently only + implemented on powerpc. + +The following 2^n pages are the ring-buffer which contains events of the form: + +#define PERF_EVENT_MISC_KERNEL (1 << 0) +#define PERF_EVENT_MISC_USER (1 << 1) +#define PERF_EVENT_MISC_OVERFLOW (1 << 2) + +struct perf_event_header { + __u32 type; + __u16 misc; + __u16 size; +}; + +enum perf_event_type { + + /* + * The MMAP events record the PROT_EXEC mappings so that we can + * correlate userspace IPs to code. They have the following structure: + * + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * u64 addr; + * u64 len; + * u64 pgoff; + * char filename[]; + * }; + */ + PERF_EVENT_MMAP = 1, + PERF_EVENT_MUNMAP = 2, + + /* + * struct { + * struct perf_event_header header; + * + * u32 pid, tid; + * char comm[]; + * }; + */ + PERF_EVENT_COMM = 3, + + /* + * When header.misc & PERF_EVENT_MISC_OVERFLOW the event_type field + * will be PERF_RECORD_* + * + * struct { + * struct perf_event_header header; + * + * { u64 ip; } && PERF_RECORD_IP + * { u32 pid, tid; } && PERF_RECORD_TID + * { u64 time; } && PERF_RECORD_TIME + * { u64 addr; } && PERF_RECORD_ADDR + * + * { u64 nr; + * { u64 event, val; } cnt[nr]; } && PERF_RECORD_GROUP + * + * { u16 nr, + * hv, + * kernel, + * user; + * u64 ips[nr]; } && PERF_RECORD_CALLCHAIN + * }; + */ +}; + +NOTE: PERF_RECORD_CALLCHAIN is arch specific and currently only implemented + on x86. + +Notification of new events is possible through poll()/select()/epoll() and +fcntl() managing signals. + +Normally a notification is generated for every page filled, however one can +additionally set perf_counter_hw_event.wakeup_events to generate one every +so many counter overflow events. + +Future work will include a splice() interface to the ring-buffer. + + Counters can be enabled and disabled in two ways: via ioctl and via prctl. When a counter is disabled, it doesn't count or generate events but does continue to exist and maintain its count value. @@ -269,6 +429,12 @@ group other than the leader only affects that counter - disabling an non-leader stops that counter from counting but doesn't affect any other counter. +Additionally, non-inherited overflow counters can use + + ioctl(fd, PERF_COUNTER_IOC_REFRESH, nr); + +to enable a counter for 'nr' events, after which it gets disabled again. + A process can enable or disable all the counter groups that are attached to it, using prctl: