From: David Gibson Date: Wed, 13 Jun 2007 04:53:00 +0000 (+1000) Subject: [POWERPC] Fix problems with device tree representation of TSI-1xx bridges X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e58ca3de64927e96beb2f1594975dc4a29b79459;p=linux-beck.git [POWERPC] Fix problems with device tree representation of TSI-1xx bridges This fixes some problems with the way the some things represented in the device tree for the Holly and Taiga boards. This means changes both to the dts files, and to the code which instantiates the tsi108 ethernet platform devices based on the device tree. - First, and most importantly, the ethernet PHYs are given with an identical 'reg' property. This reg currently encodes the accessible register used to initiate mdio interaction with the PHYs, rather than a meaningful address on the parent bus (mdio in this case), which is incorrect. Instead we give the address of these registers as 'reg' in the mdio node itself, and encode the ID of each phy in their 'reg' propertyies. - Currently the platform device constructor enables a workaround in the tsi108 ethernet driver based on the compatible property of the PHY. This is incorrect, because the workaround in question is necessary due to the board's wiring of the PHY, not the model of PHY itself. This patch alters the constructor to instead enable the workaround based on a new special property in the PHY node. - The compatible properties on a number of nodes in the device tree are insufficiently precise. In particular the PHYs give only "bcm54xx", which is broken, since there are many bcm54xx PHY models, and they have differences which matter. The mdio had a compatible property of "tsi-ethernet" identical to the ethernet MAC nodes, which doesn't make sense. The ethernet, i2c, bridge and PCI nodes were given only as "tsi-*" which is somewhat inprecise, we replace with "tsi108-*" in the case of Taiga (which has a TSI108 bridge), and "tsi109-*", "tsi108-*" in the case of Holly (which has a TSI109 bridge). - We remove some "model" properties from the ethernets on Taiga board which were neither useful nor adequately precise. - On Holly we change to using a dtc label instead of a full path to reference the MPIC node, which makes the dts a little more readable. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index e6b5091de9ce..80a4fab8ee37 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -46,7 +46,7 @@ tsi109@c0000000 { device_type = "tsi-bridge"; - compatible = "tsi-bridge"; + compatible = "tsi109-bridge", "tsi108-bridge"; #address-cells = <1>; #size-cells = <1>; ranges = <00000000 c0000000 00010000>; @@ -54,52 +54,55 @@ i2c@7000 { device_type = "i2c"; - compatible = "tsi-i2c"; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + compatible = "tsi109-i2c", "tsi108-i2c"; + interrupt-parent = <&MPIC>; interrupts = ; reg = <7000 400>; }; - mdio@6000 { + MDIO: mdio@6000 { device_type = "mdio"; - compatible = "tsi-ethernet"; + compatible = "tsi109-mdio", "tsi108-mdio"; + reg = <6000 50>; + #address-cells = <1>; + #size-cells = <0>; - PHY1: ethernet-phy@6000 { - device_type = "ethernet-phy"; - compatible = "bcm54xx"; - reg = <6000 50>; - phy-id = <1>; + PHY1: ethernet-phy@1 { + compatible = "bcm5461a"; + reg = <1>; + txc-rxc-delay-disable; }; - PHY2: ethernet-phy@6400 { - device_type = "ethernet-phy"; - compatible = "bcm54xx"; - reg = <6000 50>; - phy-id = <2>; + PHY2: ethernet-phy@2 { + compatible = "bcm5461a"; + reg = <2>; + txc-rxc-delay-disable; }; }; ethernet@6200 { device_type = "network"; - compatible = "tsi-ethernet"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; reg = <6000 200>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <10 2>; + mdio-handle = <&MDIO>; phy-handle = <&PHY1>; }; ethernet@6600 { device_type = "network"; - compatible = "tsi-ethernet"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; reg = <6400 200>; local-mac-address = [ 00 00 00 00 00 00 ]; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <11 2>; + mdio-handle = <&MDIO>; phy-handle = <&PHY2>; }; @@ -110,7 +113,7 @@ virtual-reg = ; clock-frequency = <3F9C6000>; current-speed = <1c200>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = ; }; @@ -121,7 +124,7 @@ virtual-reg = ; clock-frequency = <3F9C6000>; current-speed = <1c200>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = ; }; @@ -136,7 +139,7 @@ pci@1000 { device_type = "pci"; - compatible = "tsi109"; + compatible = "tsi109-pci", "tsi108-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -150,7 +153,7 @@ ranges = <02000000 0 40000000 40000000 0 10000000 01000000 0 00000000 7e000000 0 00010000>; clock-frequency = <7f28154>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; interrupts = <17 2>; interrupt-map-mask = ; /*----------------------------------------------------+ @@ -186,7 +189,7 @@ #address-cells = <0>; #interrupt-cells = <2>; interrupts = <17 2>; - interrupt-parent = < &/tsi109@c0000000/pic@7400 >; + interrupt-parent = <&MPIC>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 765c306ecf80..0e3d314a7158 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -45,7 +45,7 @@ #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; - device_type = "tsi-bridge"; + device_type = "tsi108-bridge"; ranges = <00000000 c0000000 00010000>; reg = ; bus-frequency = <0>; @@ -55,27 +55,26 @@ interrupts = ; reg = <7000 400>; device_type = "i2c"; - compatible = "tsi-i2c"; + compatible = "tsi108-i2c"; }; - mdio@6000 { + MDIO: mdio@6000 { device_type = "mdio"; - compatible = "tsi-ethernet"; + compatible = "tsi108-mdio"; + reg = <6000 50>; + #address-cells = <1>; + #size-cells = <0>; - phy8: ethernet-phy@6000 { + phy8: ethernet-phy@8 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <6000 50>; - phy-id = <8>; - device_type = "ethernet-phy"; + reg = <8>; }; - phy9: ethernet-phy@6400 { + phy9: ethernet-phy@9 { interrupt-parent = <&mpic>; interrupts = <2 1>; - reg = <6000 50>; - phy-id = <9>; - device_type = "ethernet-phy"; + reg = <9>; }; }; @@ -83,12 +82,12 @@ ethernet@6200 { #size-cells = <0>; device_type = "network"; - model = "TSI-ETH"; - compatible = "tsi-ethernet"; + compatible = "tsi108-ethernet"; reg = <6000 200>; address = [ 00 06 D2 00 00 01 ]; interrupts = <10 2>; interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; phy-handle = <&phy8>; }; @@ -96,12 +95,12 @@ #address-cells = <1>; #size-cells = <0>; device_type = "network"; - model = "TSI-ETH"; - compatible = "tsi-ethernet"; + compatible = "tsi108-ethernet"; reg = <6400 200>; address = [ 00 06 D2 00 00 02 ]; interrupts = <11 2>; interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; phy-handle = <&phy9>; }; @@ -135,7 +134,7 @@ big-endian; }; pci@1000 { - compatible = "tsi10x"; + compatible = "tsi108-pci"; device_type = "pci"; #interrupt-cells = <1>; #size-cells = <2>; diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 7d3b09b7d544..a113d800cbf0 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -72,12 +72,11 @@ static int __init tsi108_eth_of_init(void) int ret; for (np = NULL, i = 0; - (np = of_find_compatible_node(np, "network", "tsi-ethernet")) != NULL; + (np = of_find_compatible_node(np, "network", "tsi108-ethernet")) != NULL; i++) { struct resource r[2]; - struct device_node *phy; + struct device_node *phy, *mdio; hw_info tsi_eth_data; - const unsigned int *id; const unsigned int *phy_id; const void *mac_addr; const phandle *ph; @@ -111,6 +110,13 @@ static int __init tsi108_eth_of_init(void) if (mac_addr) memcpy(tsi_eth_data.mac_addr, mac_addr, 6); + ph = of_get_property(np, "mdio-handle", NULL); + mdio = of_find_node_by_phandle(*ph); + ret = of_address_to_resource(mdio, 0, &res); + of_node_put(mdio); + if (ret) + goto unreg; + ph = of_get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); @@ -119,20 +125,25 @@ static int __init tsi108_eth_of_init(void) goto unreg; } - id = of_get_property(phy, "reg", NULL); - phy_id = of_get_property(phy, "phy-id", NULL); - ret = of_address_to_resource(phy, 0, &res); - if (ret) { - of_node_put(phy); - goto unreg; - } + phy_id = of_get_property(phy, "reg", NULL); + tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); - if (of_device_is_compatible(phy, "bcm54xx")) + + /* Some boards with the TSI108 bridge (e.g. Holly) + * have a miswiring of the ethernet PHYs which + * requires a workaround. The special + * "txc-rxc-delay-disable" property enables this + * workaround. FIXME: Need to port the tsi108_eth + * driver itself to phylib and use a non-misleading + * name for the workaround flag - it's not actually to + * do with the model of PHY in use */ + if (of_get_property(phy, "txc-rxc-delay-disable", NULL)) tsi_eth_data.phy_type = TSI108_PHY_BCM54XX; of_node_put(phy); + ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, sizeof(hw_info));