From: Imre Deak Date: Thu, 9 Jan 2014 15:08:16 +0000 (+0200) Subject: drm/i915: vlv: W/a for hotplug/manual VGA detection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e5cbfbfb2e0e44ed18cbadc02e0247bd1e60fb39;p=linux-beck.git drm/i915: vlv: W/a for hotplug/manual VGA detection VGA detection requires the reference clock to be on, so make sure this is the case. This fixes VGA hotplug/manual detection where all pipes are off and so we would normally disable all clocks. v2: - Instead of disabling PSR clock gating, force the reference clock on through the DPLL_A register. (Kin Chan S ) v3: - Move enabling of the clock to intel_reset_dpio() and use the DPLL_B register instead, where we already have a similar tweak for the CRI clock. (Ville) Reported-by: Joonas Lahtinen Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7df05112951d..fe2d71a1c39e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1374,8 +1374,12 @@ static void intel_reset_dpio(struct drm_device *dev) if (!IS_VALLEYVIEW(dev)) return; - /* Enable the CRI clock source so we can get at the display */ + /* + * Enable the CRI clock source so we can get at the display and the + * reference clock for VGA hotplug / manual detection. + */ I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); /* @@ -1504,9 +1508,12 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) /* Make sure the pipe isn't still relying on us */ assert_pipe_disabled(dev_priv, pipe); - /* Leave integrated clock source enabled */ + /* + * Leave integrated clock source and reference clock enabled for pipe B. + * The latter is needed for VGA hotplug / manual detection. + */ if (pipe == PIPE_B) - val = DPLL_INTEGRATED_CRI_CLK_VLV; + val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV; I915_WRITE(DPLL(pipe), val); POSTING_READ(DPLL(pipe)); } @@ -4983,7 +4990,11 @@ static void vlv_update_pll(struct intel_crtc *crtc) vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); - /* Enable DPIO clock input */ + /* + * Enable DPIO clock input. We should never disable the reference + * clock for pipe B, since VGA hotplug / manual detection depends + * on it. + */ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; /* We should never disable this, set it here for state tracking */