From: Tobias Klauser <tklauser@distanz.ch>
Date: Wed, 23 Sep 2015 07:20:02 +0000 (+0200)
Subject: net: ll_temac: Use of_property_read_u32 instead of open-coding it
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e734a42f046104f798195042e5a4d4b357f0b3fb;p=linux-beck.git

net: ll_temac: Use of_property_read_u32 instead of open-coding it

Use of_property_read_u32 to read the "clock-frequency" property instead
of using of_get_property with return value checks.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/ethernet/xilinx/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
index 8cf9d4f56bb2..415de1eaf641 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_mdio.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
@@ -59,16 +59,15 @@ static int temac_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
 int temac_mdio_setup(struct temac_local *lp, struct device_node *np)
 {
 	struct mii_bus *bus;
-	const u32 *bus_hz;
+	u32 bus_hz;
 	int clk_div;
-	int rc, size;
+	int rc;
 	struct resource res;
 
 	/* Calculate a reasonable divisor for the clock rate */
 	clk_div = 0x3f; /* worst-case default setting */
-	bus_hz = of_get_property(np, "clock-frequency", &size);
-	if (bus_hz && size >= sizeof(*bus_hz)) {
-		clk_div = (*bus_hz) / (2500 * 1000 * 2) - 1;
+	if (of_property_read_u32(np, "clock-frequency", &bus_hz) == 0) {
+		clk_div = bus_hz / (2500 * 1000 * 2) - 1;
 		if (clk_div < 1)
 			clk_div = 1;
 		if (clk_div > 0x3f)