From: George Spelvin Date: Sun, 11 May 2014 10:07:43 +0000 (-0400) Subject: drivers/net/wireless/ti/wl*/spi.c: Simplify CRC computation X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e757201b8d66b02ed0ff90e5e9c7b8f3143ebfe7;p=linux-beck.git drivers/net/wireless/ti/wl*/spi.c: Simplify CRC computation These devices require commands stored in buffers in an odd order, different from that in which the CRC is computed. Rather than make two copies of the commands in two different orders, form the commands in logical (CRC) order, append the CRC, then byte-swap in place to the desired order. The old code worked fine, I'm just scratching an "ugh, that's ugly" itch. Signed-off-by: George Spelvin Reviewed-by: Pavel Machek Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index e94b57cd5a22..a0aa8fa72392 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -83,46 +84,44 @@ static void wl1251_spi_reset(struct wl1251 *wl) static void wl1251_spi_wake(struct wl1251 *wl) { - u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; struct spi_transfer t; struct spi_message m; + u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); - cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); if (!cmd) { wl1251_error("could not allocate cmd for spi init"); return; } - memset(crc, 0, sizeof(crc)); memset(&t, 0, sizeof(t)); spi_message_init(&m); /* Set WSPI_INIT_COMMAND * the data is being send from the MSB to LSB */ - cmd[2] = 0xff; - cmd[3] = 0xff; - cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; - cmd[0] = 0; - cmd[7] = 0; - cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; - cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + cmd[0] = 0xff; + cmd[1] = 0xff; + cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; + cmd[3] = 0; + cmd[4] = 0; + cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3; + cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + + cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS + | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) - cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; + cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; else - cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; - - cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS - | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; - - crc[0] = cmd[1]; - crc[1] = cmd[0]; - crc[2] = cmd[7]; - crc[3] = cmd[6]; - crc[4] = cmd[5]; + cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; - cmd[4] = crc7_be(0, crc, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; + cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; + /* + * The above is the logical order; it must actually be stored + * in the buffer byte-swapped. + */ + __swab32s((u32 *)cmd); + __swab32s((u32 *)cmd+1); t.tx_buf = cmd; t.len = WSPI_INIT_CMD_LEN; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 1d4ddabe6063..392c882b28f0 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -24,11 +24,12 @@ #include #include #include +#include +#include #include #include #include #include -#include #include "wlcore.h" #include "wl12xx_80211.h" @@ -110,18 +111,16 @@ static void wl12xx_spi_reset(struct device *child) static void wl12xx_spi_init(struct device *child) { struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); - u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd; struct spi_transfer t; struct spi_message m; + u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); - cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); if (!cmd) { dev_err(child->parent, "could not allocate cmd for spi init\n"); return; } - memset(crc, 0, sizeof(crc)); memset(&t, 0, sizeof(t)); spi_message_init(&m); @@ -129,29 +128,29 @@ static void wl12xx_spi_init(struct device *child) * Set WSPI_INIT_COMMAND * the data is being send from the MSB to LSB */ - cmd[2] = 0xff; - cmd[3] = 0xff; - cmd[1] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; - cmd[0] = 0; - cmd[7] = 0; - cmd[6] |= HW_ACCESS_WSPI_INIT_CMD_MASK << 3; - cmd[6] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + cmd[0] = 0xff; + cmd[1] = 0xff; + cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; + cmd[3] = 0; + cmd[4] = 0; + cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3; + cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + + cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS + | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) - cmd[5] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; + cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; else - cmd[5] |= WSPI_INIT_CMD_EN_FIXEDBUSY; + cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; - cmd[5] |= WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS - | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; - - crc[0] = cmd[1]; - crc[1] = cmd[0]; - crc[2] = cmd[7]; - crc[3] = cmd[6]; - crc[4] = cmd[5]; - - cmd[4] = crc7_be(0, crc, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; + cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; + /* + * The above is the logical order; it must actually be stored + * in the buffer byte-swapped. + */ + __swab32s((u32 *)cmd); + __swab32s((u32 *)cmd+1); t.tx_buf = cmd; t.len = WSPI_INIT_CMD_LEN;