From: Stanislav Fomichev Date: Sun, 27 Mar 2011 21:31:37 +0000 (+0400) Subject: brcm80211: remove unused defines in bcmdevs.h X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e7c7add92cf073bb81ee11bb3e63a0e1f83d6658;p=linux-beck.git brcm80211: remove unused defines in bcmdevs.h Signed-off-by: Stanislav Fomichev Acked-by: Roland Vossen Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/brcm80211/include/bcmdevs.h b/drivers/staging/brcm80211/include/bcmdevs.h index 7ccb25247209..26947efa83e8 100644 --- a/drivers/staging/brcm80211/include/bcmdevs.h +++ b/drivers/staging/brcm80211/include/bcmdevs.h @@ -17,14 +17,10 @@ #ifndef _BCMDEVS_H #define _BCMDEVS_H -/* DONGLE VID/PIDs */ -#define BCM_DNGL_VID 0x0a5c -#define BCM_DNGL_BDC_PID 0x0bdc - #define BCM4325_D11DUAL_ID 0x431b #define BCM4325_D11G_ID 0x431c #define BCM4325_D11A_ID 0x431d -#define BCM4329_D11N_ID 0x432e /* 4329 802.11n dualband device */ + #define BCM4329_D11N2G_ID 0x432f /* 4329 802.11n 2.4G device */ #define BCM4329_D11N5G_ID 0x4330 /* 4329 802.11n 5G device */ #define BCM4329_D11NDUAL_ID 0x432e @@ -34,22 +30,13 @@ #define BCM4319_D11N5G_ID 0x4339 /* 4319 802.11n 5G device */ #define BCM43224_D11N_ID 0x4353 /* 43224 802.11n dualband device */ + #define BCM43225_D11N2G_ID 0x4357 /* 43225 802.11n 2.4GHz device */ #define BCM43236_D11N_ID 0x4346 /* 43236 802.11n dualband device */ #define BCM43236_D11N2G_ID 0x4347 /* 43236 802.11n 2.4GHz device */ -#define BCM43236_D11N5G_ID 0x4348 /* 43236 802.11n 5GHz device */ -#define BCM43421_D11N_ID 0xA99D /* 43421 802.11n dualband device */ #define BCM4313_D11N2G_ID 0x4727 /* 4313 802.11n 2.4G device */ -#define BCM4330_D11N_ID 0x4360 /* 4330 802.11n dualband device */ -#define BCM4330_D11N2G_ID 0x4361 /* 4330 802.11n 2.4G device */ -#define BCM4330_D11N5G_ID 0x4362 /* 4330 802.11n 5G device */ -#define BCM4336_D11N_ID 0x4343 /* 4336 802.11n 2.4GHz device */ -#define BCM6362_D11N_ID 0x435f /* 6362 802.11n dualband device */ -#define BCM4331_D11N_ID 0x4331 /* 4331 802.11n dualband id */ -#define BCM4331_D11N2G_ID 0x4332 /* 4331 802.11n 2.4Ghz band id */ -#define BCM4331_D11N5G_ID 0x4333 /* 4331 802.11n 5Ghz band id */ /* Chip IDs */ #define BCM4313_CHIP_ID 0x4313 /* 4313 chip id */ @@ -57,7 +44,6 @@ #define BCM43224_CHIP_ID 43224 /* 43224 chipcommon chipid */ #define BCM43225_CHIP_ID 43225 /* 43225 chipcommon chipid */ -#define BCM43228_CHIP_ID 43228 /* 43228 chipcommon chipid */ #define BCM43421_CHIP_ID 43421 /* 43421 chipcommon chipid */ #define BCM43235_CHIP_ID 43235 /* 43235 chipcommon chipid */ #define BCM43236_CHIP_ID 43236 /* 43236 chipcommon chipid */ @@ -79,57 +65,23 @@ /* Package IDs */ #define BCM4329_289PIN_PKG_ID 0 /* 4329 289-pin package id */ #define BCM4329_182PIN_PKG_ID 1 /* 4329N 182-pin package id */ -#define BCM4716_PKG_ID 8 /* 4716 package id */ #define BCM4717_PKG_ID 9 /* 4717 package id */ #define BCM4718_PKG_ID 10 /* 4718 package id */ -#define BCM5356_PKG_NONMODE 1 /* 5356 package without nmode suppport */ -#define BCM5358U_PKG_ID 8 /* 5358U package id */ -#define BCM5358_PKG_ID 9 /* 5358 package id */ -#define BCM47186_PKG_ID 10 /* 47186 package id */ -#define BCM5357_PKG_ID 11 /* 5357 package id */ -#define BCM5356U_PKG_ID 12 /* 5356U package id */ -#define HDLSIM5350_PKG_ID 1 /* HDL simulator package id for a 5350 */ #define HDLSIM_PKG_ID 14 /* HDL simulator package id */ #define HWSIM_PKG_ID 15 /* Hardware simulator package id */ -#define BCM43224_FAB_CSM 0x8 /* the chip is manufactured by CSM */ #define BCM43224_FAB_SMIC 0xa /* the chip is manufactured by SMIC */ -#define BCM4336_WLBGA_PKG_ID 0x8 /* boardflags */ -#define BFL_RESERVED1 0x00000001 #define BFL_PACTRL 0x00000002 /* Board has gpio 9 controlling the PA */ -#define BFL_AIRLINEMODE 0x00000004 /* Board implements gpio 13 radio disable indication */ -#define BFL_ADCDIV 0x00000008 /* Board has the rssi ADC divider */ -#define BFL_ENETROBO 0x00000010 /* Board has robo switch or core */ #define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */ -#define BFL_CCKHIPWR 0x00000040 /* Can do high-power CCK transmission */ -#define BFL_ENETADM 0x00000080 /* Board has ADMtek switch */ -#define BFL_ENETVLAN 0x00000100 /* Board has VLAN capability */ -#define BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ #define BFL_FEM 0x00000800 /* Board supports the Front End Module */ #define BFL_EXTLNA 0x00001000 /* Board has an external LNA in 2.4GHz band */ -#define BFL_HGPA 0x00002000 /* Board has a high gain PA */ -#define BFL_RESERVED2 0x00004000 -#define BFL_ALTIQ 0x00008000 /* Alternate I/Q settings */ #define BFL_NOPA 0x00010000 /* Board has no PA */ -#define BFL_RSSIINV 0x00020000 /* Board's RSSI uses positive slope(not TSSI) */ -#define BFL_PAREF 0x00040000 /* Board uses the PARef LDO */ -#define BFL_3TSWITCH 0x00080000 /* Board uses a triple throw switch shared with BT */ -#define BFL_PHASESHIFT 0x00100000 /* Board can support phase shifter */ #define BFL_BUCKBOOST 0x00200000 /* Power topology uses BUCKBOOST */ #define BFL_FEM_BT 0x00400000 /* Board has FEM and switch to share antenna w/ BT */ #define BFL_NOCBUCK 0x00800000 /* Power topology doesn't use CBUCK */ -#define BFL_CCKFAVOREVM 0x01000000 /* Favor CCK EVM over spectral mask */ #define BFL_PALDO 0x02000000 /* Power topology uses PALDO */ -#define BFL_LNLDO2_2P5 0x04000000 /* Select 2.5V as LNLDO2 output voltage */ -#define BFL_FASTPWR 0x08000000 -#define BFL_UCPWRCTL_MININDX 0x08000000 /* Enforce min power index to avoid FEM damage */ #define BFL_EXTLNA_5GHz 0x10000000 /* Board has an external LNA in 5GHz band */ -#define BFL_TRSW_1by2 0x20000000 /* Board has 2 TRSW's in 1by2 designs */ -#define BFL_LO_TRSW_R_5GHz 0x40000000 /* In 5G do not throw TRSW to T for clipLO gain */ -#define BFL_ELNA_GAINDEF 0x80000000 /* Backoff InitGain based on elna_2g/5g field - * when this flag is set - */ /* boardflags2 */ #define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Board has an external rxbb regulator */ @@ -138,16 +90,12 @@ #define BFL2_2X4_DIV 0x00000008 /* Board supports the 2X4 diversity switch */ #define BFL2_5G_PWRGAIN 0x00000010 /* Board supports 5G band power gain */ #define BFL2_PCIEWAR_OVR 0x00000020 /* Board overrides ASPM and Clkreq settings */ -#define BFL2_CAESERS_BRD 0x00000040 /* Board is Caesers brd (unused by sw) */ #define BFL2_LEGACY 0x00000080 #define BFL2_SKWRKFEM_BRD 0x00000100 /* 4321mcm93 board uses Skyworks FEM */ #define BFL2_SPUR_WAR 0x00000200 /* Board has a WAR for clock-harmonic spurs */ #define BFL2_GPLL_WAR 0x00000400 /* Flag to narrow G-band PLL loop b/w */ -#define BFL2_TRISTATE_LED 0x00000800 /* Tri-state the LED */ #define BFL2_SINGLEANT_CCK 0x00001000 /* Tx CCK pkts on Ant 0 only */ #define BFL2_2G_SPUR_WAR 0x00002000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */ -#define BFL2_BPHY_ALL_TXCORES 0x00004000 /* Transmit bphy frames using all tx cores */ -#define BFL2_FCC_BANDEDGE_WAR 0x00008000 /* using 40Mhz LPF for 20Mhz bandedge channels */ #define BFL2_GPLL_WAR2 0x00010000 /* Flag to widen G-band PLL loop b/w */ #define BFL2_IPALVLSHIFT_3P3 0x00020000 #define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Use internal envelope detector for TX IQCAL */ @@ -157,32 +105,19 @@ */ /* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ -#define BOARD_GPIO_RESERVED1 0x010 -#define BOARD_GPIO_RESERVED2 0x020 -#define BOARD_GPIO_RESERVED3 0x080 -#define BOARD_GPIO_RESERVED4 0x100 #define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ #define BOARD_GPIO_12 0x1000 /* gpio 12 */ #define BOARD_GPIO_13 0x2000 /* gpio 13 */ -#define BOARD_GPIO_RESERVED5 0x0800 -#define BOARD_GPIO_RESERVED6 0x2000 -#define BOARD_GPIO_RESERVED7 0x4000 -#define BOARD_GPIO_RESERVED8 0x8000 #define PCI_CFG_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ -#define PCI_CFG_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ #define PCI_CFG_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal power-up */ #define PCI_CFG_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL power-down */ /* power control defines */ #define PLL_DELAY 150 /* us pll on delay */ #define FREF_DELAY 200 /* us fref change delay */ -#define MIN_SLOW_CLK 32 /* us Slow clock period */ #define XTAL_ON_DELAY 1000 /* us crystal power-on delay */ -/* # of GPIO pins */ -#define GPIO_NUMPINS 16 - /* Reference board types */ #define SPI_BOARD 0x0402