From: Bruce Allan Date: Wed, 1 May 2013 01:19:46 +0000 (+0000) Subject: e1000e: cleanup whitespace X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=e80bd1d181ff4601d88cf438817a3a7e84fe6912;p=linux-beck.git e1000e: cleanup whitespace Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c index b71c8502a2b3..895450e9bb3c 100644 --- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c +++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c @@ -66,17 +66,17 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw) s32 ret_val; if (hw->phy.media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; + phy->type = e1000_phy_none; return 0; } else { phy->ops.power_up = e1000_power_up_phy_copper; phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan; } - phy->addr = 1; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - phy->type = e1000_phy_gg82563; + phy->addr = 1; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + phy->type = e1000_phy_gg82563; /* This can only be done after all function pointers are setup. */ ret_val = e1000e_get_phy_id(hw); @@ -98,19 +98,19 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) u32 eecd = er32(EECD); u16 size; - nvm->opcode_bits = 8; - nvm->delay_usec = 1; + nvm->opcode_bits = 8; + nvm->delay_usec = 1; switch (nvm->override) { case e1000_nvm_override_spi_large: - nvm->page_size = 32; + nvm->page_size = 32; nvm->address_bits = 16; break; case e1000_nvm_override_spi_small: - nvm->page_size = 8; + nvm->page_size = 8; nvm->address_bits = 8; break; default: - nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; break; } @@ -128,7 +128,7 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) /* EEPROM access above 16k is unsupported */ if (size > 14) size = 14; - nvm->word_size = 1 << size; + nvm->word_size = 1 << size; return 0; } @@ -859,7 +859,7 @@ static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw) /* Transmit Arbitration Control 0 */ reg = er32(TARC(0)); - reg &= ~(0xF << 27); /* 30:27 */ + reg &= ~(0xF << 27); /* 30:27 */ if (hw->phy.media_type != e1000_media_type_copper) reg &= ~(1 << 20); ew32(TARC(0), reg); diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c index 7380442a3829..bef2f103ab03 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.c +++ b/drivers/net/ethernet/intel/e1000e/82571.c @@ -77,24 +77,24 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) return 0; } - phy->addr = 1; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; + phy->addr = 1; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_82571; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82571; switch (hw->mac.type) { case e1000_82571: case e1000_82572: - phy->type = e1000_phy_igp_2; + phy->type = e1000_phy_igp_2; break; case e1000_82573: - phy->type = e1000_phy_m88; + phy->type = e1000_phy_m88; break; case e1000_82574: case e1000_82583: - phy->type = e1000_phy_bm; + phy->type = e1000_phy_bm; phy->ops.acquire = e1000_get_hw_semaphore_82574; phy->ops.release = e1000_put_hw_semaphore_82574; phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574; @@ -193,7 +193,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) /* EEPROM access above 16k is unsupported */ if (size > 14) size = 14; - nvm->word_size = 1 << size; + nvm->word_size = 1 << size; break; } @@ -339,7 +339,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_hw *hw) static s32 e1000_get_variants_82571(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - static int global_quad_port_a; /* global port a indication */ + static int global_quad_port_a; /* global port a indication */ struct pci_dev *pdev = adapter->pdev; int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1; s32 rc; @@ -1178,7 +1178,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) /* Transmit Arbitration Control 0 */ reg = er32(TARC(0)); - reg &= ~(0xF << 27); /* 30:27 */ + reg &= ~(0xF << 27); /* 30:27 */ switch (hw->mac.type) { case e1000_82571: case e1000_82572: @@ -1390,7 +1390,7 @@ bool e1000_check_phy_82574(struct e1000_hw *hw) ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors); if (ret_val) return false; - if (receive_errors == E1000_RECEIVE_ERROR_MAX) { + if (receive_errors == E1000_RECEIVE_ERROR_MAX) { ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt); if (ret_val) return false; diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 7c8ca658d553..59c22bf18701 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -244,7 +244,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) mac->autoneg = 1; adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; break; - case SPEED_1000 + DUPLEX_HALF: /* not supported */ + case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: goto err_inval; } @@ -416,7 +416,7 @@ static void e1000_set_msglevel(struct net_device *netdev, u32 data) static int e1000_get_regs_len(struct net_device __always_unused *netdev) { -#define E1000_REGS_LEN 32 /* overestimate */ +#define E1000_REGS_LEN 32 /* overestimate */ return E1000_REGS_LEN * sizeof(u32); } @@ -433,22 +433,22 @@ static void e1000_get_regs(struct net_device *netdev, regs->version = (1 << 24) | (adapter->pdev->revision << 16) | adapter->pdev->device; - regs_buff[0] = er32(CTRL); - regs_buff[1] = er32(STATUS); + regs_buff[0] = er32(CTRL); + regs_buff[1] = er32(STATUS); - regs_buff[2] = er32(RCTL); - regs_buff[3] = er32(RDLEN(0)); - regs_buff[4] = er32(RDH(0)); - regs_buff[5] = er32(RDT(0)); - regs_buff[6] = er32(RDTR); + regs_buff[2] = er32(RCTL); + regs_buff[3] = er32(RDLEN(0)); + regs_buff[4] = er32(RDH(0)); + regs_buff[5] = er32(RDT(0)); + regs_buff[6] = er32(RDTR); - regs_buff[7] = er32(TCTL); - regs_buff[8] = er32(TDLEN(0)); - regs_buff[9] = er32(TDH(0)); + regs_buff[7] = er32(TCTL); + regs_buff[8] = er32(TDLEN(0)); + regs_buff[9] = er32(TDH(0)); regs_buff[10] = er32(TDT(0)); regs_buff[11] = er32(TIDV); - regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ + regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ /* ethtool doesn't use anything past this point, so all this * code is likely legacy junk for apps that may or may not exist @@ -1379,7 +1379,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) if (hw->phy.media_type == e1000_media_type_copper && hw->phy.type == e1000_phy_m88) { - ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ + ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ } else { /* Set the ILOS bit on the fiber Nic if half duplex link is * detected. @@ -1613,7 +1613,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) ew32(TDT(0), k); e1e_flush(); msleep(200); - time = jiffies; /* set the start time for the receive */ + time = jiffies; /* set the start time for the receive */ good_cnt = 0; /* receive the sent packets */ do { @@ -1636,11 +1636,11 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) */ } while ((good_cnt < 64) && !time_after(jiffies, time + 20)); if (good_cnt != 64) { - ret_val = 13; /* ret_val is the same as mis-compare */ + ret_val = 13; /* ret_val is the same as mis-compare */ break; } if (jiffies >= (time + 20)) { - ret_val = 14; /* error code for time out error */ + ret_val = 14; /* error code for time out error */ break; } } diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index 84850f7a23e4..a6f903a9b773 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -402,13 +402,13 @@ struct e1000_phy_stats { struct e1000_host_mng_dhcp_cookie { u32 signature; - u8 status; - u8 reserved0; + u8 status; + u8 reserved0; u16 vlan_id; u32 reserved1; u16 reserved2; - u8 reserved3; - u8 checksum; + u8 reserved3; + u8 checksum; }; /* Host Interface "Rev 1" */ @@ -427,8 +427,8 @@ struct e1000_host_command_info { /* Host Interface "Rev 2" */ struct e1000_host_mng_command_header { - u8 command_id; - u8 checksum; + u8 command_id; + u8 checksum; u16 reserved1; u16 reserved2; u16 command_length; @@ -549,7 +549,7 @@ struct e1000_mac_info { u32 mta_shadow[MAX_MTA_REG]; u16 rar_entry_count; - u8 forced_speed_duplex; + u8 forced_speed_duplex; bool adaptive_ifs; bool has_fwsm; @@ -577,7 +577,7 @@ struct e1000_phy_info { u32 addr; u32 id; - u32 reset_delay_us; /* in usec */ + u32 reset_delay_us; /* in usec */ u32 revision; enum e1000_media_type media_type; @@ -636,11 +636,11 @@ struct e1000_dev_spec_82571 { }; struct e1000_dev_spec_80003es2lan { - bool mdic_wa_enable; + bool mdic_wa_enable; }; struct e1000_shadow_ram { - u16 value; + u16 value; bool modified; }; @@ -660,17 +660,17 @@ struct e1000_hw { void __iomem *hw_addr; void __iomem *flash_address; - struct e1000_mac_info mac; - struct e1000_fc_info fc; - struct e1000_phy_info phy; - struct e1000_nvm_info nvm; - struct e1000_bus_info bus; + struct e1000_mac_info mac; + struct e1000_fc_info fc; + struct e1000_phy_info phy; + struct e1000_nvm_info nvm; + struct e1000_bus_info bus; struct e1000_host_mng_dhcp_cookie mng_cookie; union { - struct e1000_dev_spec_82571 e82571; + struct e1000_dev_spec_82571 e82571; struct e1000_dev_spec_80003es2lan e80003es2lan; - struct e1000_dev_spec_ich8lan ich8lan; + struct e1000_dev_spec_ich8lan ich8lan; } dev_spec; }; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index ad9d8f2dd868..9dde390f7e71 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -101,12 +101,12 @@ union ich8_hws_flash_regacc { /* ICH Flash Protected Region */ union ich8_flash_protected_range { struct ich8_pr { - u32 base:13; /* 0:12 Protected Range Base */ - u32 reserved1:2; /* 13:14 Reserved */ - u32 rpe:1; /* 15 Read Protection Enable */ - u32 limit:13; /* 16:28 Protected Range Limit */ - u32 reserved2:2; /* 29:30 Reserved */ - u32 wpe:1; /* 31 Write Protection Enable */ + u32 base:13; /* 0:12 Protected Range Base */ + u32 reserved1:2; /* 13:14 Reserved */ + u32 rpe:1; /* 15 Read Protection Enable */ + u32 limit:13; /* 16:28 Protected Range Limit */ + u32 reserved2:2; /* 29:30 Reserved */ + u32 wpe:1; /* 31 Write Protection Enable */ } range; u32 regval; }; @@ -362,21 +362,21 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - phy->addr = 1; - phy->reset_delay_us = 100; - - phy->ops.set_page = e1000_set_page_igp; - phy->ops.read_reg = e1000_read_phy_reg_hv; - phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; - phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; - phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.write_reg = e1000_write_phy_reg_hv; - phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; - phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->addr = 1; + phy->reset_delay_us = 100; + + phy->ops.set_page = e1000_set_page_igp; + phy->ops.read_reg = e1000_read_phy_reg_hv; + phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.read_reg_page = e1000_read_phy_reg_page_hv; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.write_reg = e1000_write_phy_reg_hv; + phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.write_reg_page = e1000_write_phy_reg_page_hv; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -445,11 +445,11 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 i = 0; - phy->addr = 1; - phy->reset_delay_us = 100; + phy->addr = 1; + phy->reset_delay_us = 100; - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; /* We may need to do this twice - once for IGP and if that fails, * we'll set BM func pointers and try again @@ -457,7 +457,7 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) ret_val = e1000e_determine_phy_address(hw); if (ret_val) { phy->ops.write_reg = e1000e_write_phy_reg_bm; - phy->ops.read_reg = e1000e_read_phy_reg_bm; + phy->ops.read_reg = e1000e_read_phy_reg_bm; ret_val = e1000e_determine_phy_address(hw); if (ret_val) { e_dbg("Cannot determine PHY addr. Erroring out\n"); @@ -560,7 +560,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Clear shadow ram */ for (i = 0; i < nvm->word_size; i++) { dev_spec->shadow_ram[i].modified = false; - dev_spec->shadow_ram[i].value = 0xFFFF; + dev_spec->shadow_ram[i].value = 0xFFFF; } return 0; @@ -1012,7 +1012,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) hw->dev_spec.ich8lan.eee_lp_ability = 0; if (!link) - return 0; /* No link detected */ + return 0; /* No link detected */ mac->get_link_status = false; @@ -2816,7 +2816,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, s32 ret_val = -E1000_ERR_NVM; u8 count = 0; - if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) + if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK) return -E1000_ERR_NVM; flash_linear_addr = ((ICH_FLASH_LINEAR_ADDR_MASK & offset) + @@ -2939,7 +2939,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) * write to bank 0 etc. We also need to erase the segment that * is going to be written */ - ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); + ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; @@ -4073,7 +4073,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) { u32 reg; u16 data; - u8 retry = 0; + u8 retry = 0; if (hw->phy.type != e1000_phy_igp_3) return; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a27e3bcc3249..ad5f43476924 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1196,7 +1196,7 @@ static bool e1000_clean_tx_irq(struct e1000_ring *tx_ring) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { bool cleaned = false; - rmb(); /* read buffer_info after eop_desc */ + rmb(); /* read buffer_info after eop_desc */ for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; @@ -1385,7 +1385,7 @@ static bool e1000_clean_rx_irq_ps(struct e1000_ring *rx_ring, int *work_done, skb_put(skb, l1); goto copydone; - } /* if */ + } /* if */ } for (j = 0; j < PS_PAGE_BUFFERS; j++) { @@ -1800,7 +1800,7 @@ static irqreturn_t e1000_intr(int __always_unused irq, void *data) u32 rctl, icr = er32(ICR); if (!icr || test_bit(__E1000_DOWN, &adapter->state)) - return IRQ_NONE; /* Not our interrupt */ + return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is * not set, then the adapter didn't send an interrupt @@ -2487,7 +2487,7 @@ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) else if ((packets < 5) && (bytes > 512)) retval = low_latency; break; - case low_latency: /* 50 usec aka 20000 ints/s */ + case low_latency: /* 50 usec aka 20000 ints/s */ if (bytes > 10000) { /* this if handles the TSO accounting */ if (bytes / packets > 8000) @@ -2502,7 +2502,7 @@ static unsigned int e1000_update_itr(u16 itr_setting, int packets, int bytes) retval = lowest_latency; } break; - case bulk_latency: /* 250 usec aka 4000 ints/s */ + case bulk_latency: /* 250 usec aka 4000 ints/s */ if (bytes > 25000) { if (packets > 35) retval = low_latency; @@ -2554,7 +2554,7 @@ static void e1000_set_itr(struct e1000_adapter *adapter) new_itr = 70000; break; case low_latency: - new_itr = 20000; /* aka hwitr = ~200 */ + new_itr = 20000; /* aka hwitr = ~200 */ break; case bulk_latency: new_itr = 4000; @@ -3104,13 +3104,13 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* UPE and MPE will be handled by normal PROMISC logic * in e1000e_set_rx_mode */ - rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ - E1000_RCTL_BAM | /* RX All Bcast Pkts */ - E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ + rctl |= (E1000_RCTL_SBP | /* Receive bad packets */ + E1000_RCTL_BAM | /* RX All Bcast Pkts */ + E1000_RCTL_PMCF); /* RX All MAC Ctrl Pkts */ - rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */ - E1000_RCTL_DPF | /* Allow filtered pause */ - E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */ + rctl &= ~(E1000_RCTL_VFE | /* Disable VLAN filter */ + E1000_RCTL_DPF | /* Allow filtered pause */ + E1000_RCTL_CFIEN); /* Dis VLAN CFIEN Filter */ /* Do not mess with E1000_CTRL_VME, it affects transmit as well, * and that breaks VLANs. */ @@ -3799,7 +3799,7 @@ void e1000e_reset(struct e1000_adapter *adapter) hwm = min(((pba << 10) * 9 / 10), ((pba << 10) - adapter->max_frame_size)); - fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ fc->low_water = fc->high_water - 8; break; case e1000_pchlan: @@ -3808,10 +3808,10 @@ void e1000e_reset(struct e1000_adapter *adapter) */ if (adapter->netdev->mtu > ETH_DATA_LEN) { fc->high_water = 0x3500; - fc->low_water = 0x1500; + fc->low_water = 0x1500; } else { fc->high_water = 0x5000; - fc->low_water = 0x3000; + fc->low_water = 0x3000; } fc->refresh_time = 0x1000; break; @@ -4581,7 +4581,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); adapter->stats.gorc += er32(GORCL); - er32(GORCH); /* Clear gorc */ + er32(GORCH); /* Clear gorc */ adapter->stats.bprc += er32(BPRC); adapter->stats.mprc += er32(MPRC); adapter->stats.roc += er32(ROC); @@ -4614,7 +4614,7 @@ static void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.xofftxc += er32(XOFFTXC); adapter->stats.gptc += er32(GPTC); adapter->stats.gotc += er32(GOTCL); - er32(GOTCH); /* Clear gotc */ + er32(GOTCH); /* Clear gotc */ adapter->stats.rnbc += er32(RNBC); adapter->stats.ruc += er32(RUC); @@ -5106,13 +5106,13 @@ static int e1000_tso(struct e1000_ring *tx_ring, struct sk_buff *skb) context_desc = E1000_CONTEXT_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; - context_desc->lower_setup.ip_fields.ipcss = ipcss; - context_desc->lower_setup.ip_fields.ipcso = ipcso; - context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); + context_desc->lower_setup.ip_fields.ipcss = ipcss; + context_desc->lower_setup.ip_fields.ipcso = ipcso; + context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); context_desc->upper_setup.tcp_fields.tucss = tucss; context_desc->upper_setup.tcp_fields.tucso = tucso; context_desc->upper_setup.tcp_fields.tucse = 0; - context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); + context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; context_desc->cmd_and_length = cpu_to_le32(cmd_length); @@ -5363,7 +5363,7 @@ static void e1000_tx_queue(struct e1000_ring *tx_ring, int tx_flags, int count) static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) { - struct e1000_hw *hw = &adapter->hw; + struct e1000_hw *hw = &adapter->hw; u16 length, offset; if (vlan_tx_tag_present(skb) && @@ -6259,7 +6259,7 @@ static void e1000_netpoll(struct net_device *netdev) e1000_intr_msi(adapter->pdev->irq, netdev); enable_irq(adapter->pdev->irq); break; - default: /* E1000E_INT_MODE_LEGACY */ + default: /* E1000E_INT_MODE_LEGACY */ disable_irq(adapter->pdev->irq); e1000_intr(adapter->pdev->irq, netdev); enable_irq(adapter->pdev->irq); @@ -6589,9 +6589,9 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; /* construct the net_device struct */ - netdev->netdev_ops = &e1000e_netdev_ops; + netdev->netdev_ops = &e1000e_netdev_ops; e1000e_set_ethtool_ops(netdev); - netdev->watchdog_timeo = 5 * HZ; + netdev->watchdog_timeo = 5 * HZ; netif_napi_add(netdev, &adapter->napi, e1000e_poll, 64); strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); @@ -7034,7 +7034,6 @@ static void __exit e1000_exit_module(void) } module_exit(e1000_exit_module); - MODULE_AUTHOR("Intel Corporation, "); MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/intel/e1000e/nvm.c b/drivers/net/ethernet/intel/e1000e/nvm.c index 44ddc0a0ee0e..d70a03906ac0 100644 --- a/drivers/net/ethernet/intel/e1000e/nvm.c +++ b/drivers/net/ethernet/intel/e1000e/nvm.c @@ -117,7 +117,6 @@ static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) u16 data; eecd = er32(EECD); - eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); data = 0; diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c index 59c76a6815a0..da2be59505c0 100644 --- a/drivers/net/ethernet/intel/e1000e/phy.c +++ b/drivers/net/ethernet/intel/e1000e/phy.c @@ -1583,13 +1583,13 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) case e1000_phy_gg82563: case e1000_phy_bm: case e1000_phy_82578: - offset = M88E1000_PHY_SPEC_STATUS; - mask = M88E1000_PSSR_DOWNSHIFT; + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; break; case e1000_phy_igp_2: case e1000_phy_igp_3: - offset = IGP01E1000_PHY_LINK_HEALTH; - mask = IGP01E1000_PLHR_SS_DOWNGRADE; + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; break; default: /* speed downshift not supported */ @@ -1653,14 +1653,14 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw) if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - offset = IGP01E1000_PHY_PCS_INIT_REG; - mask = IGP01E1000_PHY_POLARITY_MASK; + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; } else { /* This really only applies to 10Mbps since * there is no polarity for 100Mbps (always 0). */ - offset = IGP01E1000_PHY_PORT_STATUS; - mask = IGP01E1000_PSSR_POLARITY_REVERSED; + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; } ret_val = e1e_rphy(hw, offset, &data); @@ -1900,7 +1900,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; + s32 ret_val; u16 phy_data; bool link; @@ -2253,7 +2253,7 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id) case M88E1011_I_PHY_ID: phy_type = e1000_phy_m88; break; - case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ + case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ phy_type = e1000_phy_igp_2; break; case GG82563_E_PHY_ID: @@ -2317,7 +2317,7 @@ s32 e1000e_determine_phy_address(struct e1000_hw *hw) /* If phy_type is valid, break - we found our * PHY address */ - if (phy_type != e1000_phy_unknown) + if (phy_type != e1000_phy_unknown) return 0; usleep_range(1000, 2000);