From: Jingoo Han Date: Fri, 9 Nov 2012 03:04:45 +0000 (+1100) Subject: backlight: tosa: use devm_gpio_request_one X-Git-Tag: next-20121113~6^2~111 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=eaa2b036d6b86edb6a27c813b945ada96125ee74;p=karo-tx-linux.git backlight: tosa: use devm_gpio_request_one By using devm_gpio_request_one it is possible to set the direction and initial value in one shot. Thus, using devm_gpio_request_one can make the code simpler. Signed-off-by: Jingoo Han Cc: Richard Purdie Cc: Dmitry Baryshkov Signed-off-by: Andrew Morton --- diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c index 03c6ec21a609..3fd529224c73 100644 --- a/drivers/video/backlight/tosa_bl.c +++ b/drivers/video/backlight/tosa_bl.c @@ -93,14 +93,12 @@ static int __devinit tosa_bl_probe(struct i2c_client *client, data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj; - ret = devm_gpio_request(&client->dev, TOSA_GPIO_BL_C20MA, "backlight"); + ret = devm_gpio_request_one(&client->dev, TOSA_GPIO_BL_C20MA, + GPIOF_OUT_INIT_LOW, "backlight"); if (ret) { dev_dbg(&data->bl->dev, "Unable to request gpio!\n"); return ret; } - ret = gpio_direction_output(TOSA_GPIO_BL_C20MA, 0); - if (ret) - return ret; i2c_set_clientdata(client, data); data->i2c = client; diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index bcd97c55b42f..301687abca8f 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -195,17 +195,13 @@ static int __devinit tosa_lcd_probe(struct spi_device *spi) data->spi = spi; dev_set_drvdata(&spi->dev, data); - ret = devm_gpio_request(&spi->dev, TOSA_GPIO_TG_ON, "tg #pwr"); + ret = devm_gpio_request_one(&spi->dev, TOSA_GPIO_TG_ON, + GPIOF_OUT_INIT_LOW, "tg #pwr"); if (ret < 0) goto err_gpio_tg; mdelay(60); - ret = gpio_direction_output(TOSA_GPIO_TG_ON, 0); - if (ret < 0) - goto err_gpio_tg; - - mdelay(60); tosa_lcd_tg_init(data); tosa_lcd_tg_on(data);