From: Wolfram Sang Date: Sat, 10 Oct 2015 07:24:23 +0000 (+0100) Subject: i2c: s3c2410: enable RuntimePM before registering to the core X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=eadd709f5d2e8aebb1b7bf49460e97a68d81a9b0;p=linux-beck.git i2c: s3c2410: enable RuntimePM before registering to the core The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by: Wolfram Sang Tested-by: Krzysztof Kozlowski Acked-by: Kukjin Kim Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 50bfd8cef5f2..5df819610d52 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -1243,17 +1243,19 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->adap.nr = i2c->pdata->bus_num; i2c->adap.dev.of_node = pdev->dev.of_node; + platform_set_drvdata(pdev, i2c); + + pm_runtime_enable(&pdev->dev); + ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { dev_err(&pdev->dev, "failed to add bus to i2c core\n"); + pm_runtime_disable(&pdev->dev); s3c24xx_i2c_deregister_cpufreq(i2c); clk_unprepare(i2c->clk); return ret; } - platform_set_drvdata(pdev, i2c); - - pm_runtime_enable(&pdev->dev); pm_runtime_enable(&i2c->adap.dev); dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));