From: Juuso Oikarinen Date: Thu, 1 Apr 2010 08:38:20 +0000 (+0300) Subject: wl1271: Use minimum rate for each band for control messages X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ebba60c66b3aa321a84c9a90a343c91fde972066;p=linux-beck.git wl1271: Use minimum rate for each band for control messages Currently the mac80211 is not telling a hardware rate controlled driver a rate to use for association frames etc. So to be safe, use the lowest rate of each band for communication. Signed-off-by: Juuso Oikarinen Reviewed-by: Teemu Paasikivi Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h index c5559efcf5a7..a29969efc861 100644 --- a/drivers/net/wireless/wl12xx/wl1271.h +++ b/drivers/net/wireless/wl12xx/wl1271.h @@ -447,6 +447,7 @@ struct wl1271 { /* currently configured rate set */ u32 sta_rate_set; u32 basic_rate_set; + u32 basic_rate; u32 rate_set; /* The current band */ diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 8f0bd5bee6f9..621c94691e7e 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -802,7 +802,7 @@ int wl1271_acx_rate_policies(struct wl1271 *wl) /* configure one basic rate class */ idx = ACX_TX_BASIC_RATE; - acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate_set); + acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate); acx->rate_class[idx].short_retry_limit = c->short_retry_limit; acx->rate_class[idx].long_retry_limit = c->long_retry_limit; acx->rate_class[idx].aflags = c->aflags; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index f11f9f47ffd5..5cee59fb8c5e 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -317,18 +317,10 @@ int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type) join->rx_config_options = cpu_to_le32(wl->rx_config); join->rx_filter_options = cpu_to_le32(wl->rx_filter); join->bss_type = bss_type; + join->basic_rate_set = wl->basic_rate_set; - if (wl->band == IEEE80211_BAND_2GHZ) - join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_1MBPS | - CONF_HW_BIT_RATE_2MBPS | - CONF_HW_BIT_RATE_5_5MBPS | - CONF_HW_BIT_RATE_11MBPS); - else { + if (wl->band == IEEE80211_BAND_5GHZ) join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ; - join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_6MBPS | - CONF_HW_BIT_RATE_12MBPS | - CONF_HW_BIT_RATE_24MBPS); - } join->beacon_interval = cpu_to_le16(wl->beacon_int); join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD; @@ -581,17 +573,21 @@ int wl1271_cmd_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, struct wl1271_cmd_trigger_scan_to *trigger = NULL; struct wl1271_cmd_scan *params = NULL; struct ieee80211_channel *channels; + u32 rate; int i, j, n_ch, ret; u16 scan_options = 0; u8 ieee_band; - if (band == WL1271_SCAN_BAND_2_4_GHZ) + if (band == WL1271_SCAN_BAND_2_4_GHZ) { ieee_band = IEEE80211_BAND_2GHZ; - else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled()) + rate = wl->conf.tx.basic_rate; + } else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled()) { ieee_band = IEEE80211_BAND_2GHZ; - else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled()) + rate = wl->conf.tx.basic_rate; + } else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled()) { ieee_band = IEEE80211_BAND_5GHZ; - else + rate = wl->conf.tx.basic_rate_5; + } else return -EINVAL; if (wl->hw->wiphy->bands[ieee_band]->channels == NULL) @@ -618,8 +614,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, params->params.scan_options = cpu_to_le16(scan_options); params->params.num_probe_requests = probe_requests; - /* Let the fw autodetect suitable tx_rate for probes */ - params->params.tx_rate = 0; + params->params.tx_rate = rate; params->params.tid_trigger = 0; params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 82b5dabb6e8d..0b34b6261176 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -674,6 +674,19 @@ struct conf_tx_settings { */ u16 tx_compl_threshold; + /* + * The rate used for control messages and scanning on the 2.4GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate; + + /* + * The rate used for control messages and scanning on the 5GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate_5; }; enum { diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index 2494c967bb34..ca5cd325fac7 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -116,8 +116,7 @@ static struct conf_drv_settings default_conf = { .tx = { .tx_energy_detection = 0, .rc_conf = { - .enabled_rates = CONF_HW_BIT_RATE_1MBPS | - CONF_HW_BIT_RATE_2MBPS, + .enabled_rates = 0, .short_retry_limit = 10, .long_retry_limit = 10, .aflags = 0 @@ -214,7 +213,9 @@ static struct conf_drv_settings default_conf = { }, .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, .tx_compl_timeout = 700, - .tx_compl_threshold = 4 + .tx_compl_threshold = 4, + .basic_rate = CONF_HW_BIT_RATE_1MBPS, + .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, }, .conn = { .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, @@ -1171,6 +1172,32 @@ out: return ret; } +static void wl1271_set_band_rate(struct wl1271 *wl) +{ + if (wl->band == IEEE80211_BAND_2GHZ) + wl->basic_rate_set = wl->conf.tx.basic_rate; + else + wl->basic_rate_set = wl->conf.tx.basic_rate_5; +} + +static u32 wl1271_min_rate_get(struct wl1271 *wl) +{ + int i; + u32 rate = 0; + + if (!wl->basic_rate_set) { + WARN_ON(1); + wl->basic_rate_set = wl->conf.tx.basic_rate; + } + + for (i = 0; !rate; i++) { + if ((wl->basic_rate_set >> i) & 0x1) + rate = 1 << i; + } + + return rate; +} + static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) { struct wl1271 *wl = hw->priv; @@ -1187,12 +1214,38 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&wl->mutex); - wl->band = conf->channel->band; - ret = wl1271_ps_elp_wakeup(wl, false); if (ret < 0) goto out; + /* if the channel changes while joined, join again */ + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + wl->band = conf->channel->band; + wl->channel = channel; + + /* + * FIXME: the mac80211 should really provide a fixed rate + * to use here. for now, just use the smallest possible rate + * for the band as a fixed rate for association frames and + * other control messages. + */ + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + wl1271_set_band_rate(wl); + + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + wl1271_warning("rate policy for update channel " + "failed %d", ret); + + if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + wl1271_warning("cmd join to update channel " + "failed %d", ret); + } + } + if (changed & IEEE80211_CONF_CHANGE_IDLE) { if (conf->flags & IEEE80211_CONF_IDLE && test_bit(WL1271_FLAG_JOINED, &wl->flags)) @@ -1201,7 +1254,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) wl1271_join_channel(wl, channel); if (conf->flags & IEEE80211_CONF_IDLE) { - wl->rate_set = CONF_TX_RATE_MASK_BASIC; + wl->rate_set = wl1271_min_rate_get(wl); wl->sta_rate_set = 0; wl1271_acx_rate_policies(wl); wl1271_acx_keep_alive_config( @@ -1210,18 +1263,6 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) } } - /* if the channel changes while joined, join again */ - if (channel != wl->channel && - test_bit(WL1271_FLAG_JOINED, &wl->flags)) { - wl->channel = channel; - /* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */ - ret = wl1271_cmd_join(wl, wl->set_bss_type); - if (ret < 0) - wl1271_warning("cmd join to update channel failed %d", - ret); - } else - wl->channel = channel; - if (conf->flags & IEEE80211_CONF_PS && !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) { set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags); @@ -1659,9 +1700,22 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_ASSOC) { if (bss_conf->assoc) { + u32 rates; wl->aid = bss_conf->aid; set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); + /* + * use basic rates from AP, and determine lowest rate + * to use with control frames. + */ + rates = bss_conf->basic_rates; + wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl, + rates); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + /* * with wl1271, we don't need to update the * beacon_int and dtim_period, because the firmware @@ -1712,6 +1766,13 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags); wl->aid = 0; + /* revert back to minimum rates for the current band */ + wl1271_set_band_rate(wl); + wl->basic_rate = wl1271_min_rate_get(wl); + ret = wl1271_acx_rate_policies(wl); + if (ret < 0) + goto out_sleep; + /* disable connection monitor features */ ret = wl1271_acx_conn_monit_params(wl, false); @@ -2261,6 +2322,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void) wl->psm_entry_retry = 0; wl->power_level = WL1271_DEFAULT_POWER_LEVEL; wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC; + wl->basic_rate = CONF_TX_RATE_MASK_BASIC; wl->rate_set = CONF_TX_RATE_MASK_BASIC; wl->sta_rate_set = 0; wl->band = IEEE80211_BAND_2GHZ; diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c index 66b48b70444e..0b8cdb4e22b6 100644 --- a/drivers/net/wireless/wl12xx/wl1271_tx.c +++ b/drivers/net/wireless/wl12xx/wl1271_tx.c @@ -220,7 +220,7 @@ static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb) return ret; } -static u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set) +u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set) { struct ieee80211_supported_band *band; u32 enabled_rates = 0; diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h index b03c95d9673f..3b8b7ac253fd 100644 --- a/drivers/net/wireless/wl12xx/wl1271_tx.h +++ b/drivers/net/wireless/wl12xx/wl1271_tx.h @@ -160,5 +160,6 @@ void wl1271_tx_work(struct work_struct *work); void wl1271_tx_complete(struct wl1271 *wl); void wl1271_tx_flush(struct wl1271 *wl); u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate); +u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set); #endif