From: Baruch Siach Date: Sun, 29 Jan 2017 18:40:59 +0000 (+0200) Subject: ARM: dts: bcm2835: fix uart0 pinctrl node names X-Git-Tag: v4.12-rc2~20^2~9^2^2~3 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ec8542cb8a628fd10522f8421182207277f90185;p=karo-tx-linux.git ARM: dts: bcm2835: fix uart0 pinctrl node names Downstream kernel uses pins 32, 33 as UART0 (PL011) Rx/Tx to communicate with the Bluetooth chip. So ALT3 of these pins is most likely not CTS/RTS. Change the node name to reflect that. This matches section 6.2 "Alternative Function Assignments" in the BCM2835 ARM Peripherals document. With this change in place, adding &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; status = "okay"; }; to bcm2837-rpi-3-b.dts does the right thing on my Raspberry Pi 3. Pins 30, 31 are CTS/RTS of UART0 in alternate function 3. Rename uart0_gpio30 as well. While at it, fix a little typo in a nearby comment. Fixes: 21ff843931b ("ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.") Acked-by: Stefan Wahren Signed-off-by: Baruch Siach Reviewed-by: Eric Anholt --- diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 35cea3fcaf5c..e9623af3ad76 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -295,17 +295,17 @@ /* Separate from the uart0_gpio14 group * because it conflicts with spi1_gpio16, and * people often run uart0 on the two pins - * without flow contrl. + * without flow control. */ uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { brcm,pins = <16 17>; brcm,function = ; }; - uart0_gpio30: uart0_gpio30 { + uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { brcm,pins = <30 31>; brcm,function = ; }; - uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 { + uart0_gpio32: uart0_gpio32 { brcm,pins = <32 33>; brcm,function = ; };