From: Michael Buesch Date: Mon, 6 Nov 2006 15:45:31 +0000 (-0600) Subject: [PATCH] bcm43xx: Drain TX status before starting IRQs X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ecac598bcd1f151ee4760489bded625c147fb366;p=linux-beck.git [PATCH] bcm43xx: Drain TX status before starting IRQs Drain the Microcode TX-status-FIFO before we enable IRQs. This is required, because the FIFO may still have entries left from a previous run. Those would immediately fire after enabling IRQs and would lead to an oops in the DMA TXstatus handling code. Signed-off-by: Michael Buesch Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index 65edb56107fd..62c2ff8dfb9f 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -1463,6 +1463,23 @@ static void handle_irq_transmit_status(struct bcm43xx_private *bcm) } } +static void drain_txstatus_queue(struct bcm43xx_private *bcm) +{ + u32 dummy; + + if (bcm->current_core->rev < 5) + return; + /* Read all entries from the microcode TXstatus FIFO + * and throw them away. + */ + while (1) { + dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0); + if (!dummy) + break; + dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1); + } +} + static void bcm43xx_generate_noise_sample(struct bcm43xx_private *bcm) { bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x408, 0x7F7F); @@ -3532,6 +3549,7 @@ int bcm43xx_select_wireless_core(struct bcm43xx_private *bcm, bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC); bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8 *)(bcm->net_dev->dev_addr)); bcm43xx_security_init(bcm); + drain_txstatus_queue(bcm); ieee80211softmac_start(bcm->net_dev); /* Let's go! Be careful after enabling the IRQs.