From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 15:03:03 +0000 (-0300) Subject: [media] saa7134: Kworld SBTVD: make both analog and digital to work X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ecb71d262b0323981e07ce415da9b7adc917990a;p=linux-beck.git [media] saa7134: Kworld SBTVD: make both analog and digital to work There are some weird bugs at tda8290/tda18271 initialization, as it insits do do analog initialization during DVB frontend attach: DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)... mb86a20s: mb86a20s_initfe tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271_init: [2-0060|M] error -5 on line 830 tda18271_tune: [2-0060|M] error -5 on line 908 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5 tda18271_channel_configuration: [2-0060|M] error -5 on line 119 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33) mb86a20s: Init failed. Will try again later The problem is that mb86a20s is only visible if the analog part is disabled. However, due to a trick at mb86a20s, it will later initialize properly: mb86a20s: mb86a20s_initfe: Initialization succeded. This is hacky and ugly. However, I coldn't find any easy way to fix it. A proper fix would be to have a resource locking schema, used by both V4L and DVB parts that would block access to analog registers while digital registers are in use, but this will probably put tda829x into a dead lock. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 419d064a0188..bc6a67768af1 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -232,6 +232,7 @@ static void tda8290_set_params(struct dvb_frontend *fe, tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2); } + tda8290_i2c_bridge(fe, 1); if (fe->ops.tuner_ops.set_analog_params) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index dea90a19043f..deb8fcf4aa49 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,11 +5179,7 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, -#if 0 .tuner_type = TUNER_PHILIPS_TDA8290, -#else - .tuner_type = UNSET, -#endif .tuner_addr = ADDR_UNSET, .radio_type = UNSET, .radio_addr = ADDR_UNSET, @@ -6926,10 +6922,17 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev, /* toggle AGC switch through GPIO 27 */ switch (mode) { case TDA18271_ANALOG: - saa7134_set_gpio(dev, 27, 0); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); + msleep(20); break; case TDA18271_DIGITAL: - saa7134_set_gpio(dev, 27, 1); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); + msleep(20); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); + msleep(30); break; default: return -EINVAL; @@ -6987,6 +6990,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, int saa7134_tuner_callback(void *priv, int component, int command, int arg) { struct saa7134_dev *dev = priv; + if (dev != NULL) { switch (dev->tuner_type) { case TUNER_PHILIPS_TDA8290: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index d2a12df28af0..f65cad287b83 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -237,6 +237,8 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, .gate = TDA18271_GATE_DIGITAL, + .config = 3, /* Use tuner callback for AGC */ + }; static const struct mb86a20s_config kworld_mb86a20s_config = { @@ -1654,24 +1656,16 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); - saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); - msleep(20); - saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); - saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); - msleep(20); + /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); fe0->dvb.frontend = dvb_attach(mb86a20s_attach, &kworld_mb86a20s_config, &dev->i2c_adap); if (fe0->dvb.frontend != NULL) { -#if 0 dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x4b, &tda829x_no_probe); -#else - dvb_attach(tda829x_attach, fe0->dvb.frontend, - &dev->i2c_adap, 0x4b, NULL); -#endif dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config);