From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Sun, 27 Mar 2011 12:43:45 +0000 (+0100)
Subject: ASoC: Convert WM8903 to table based DAPM setup
X-Git-Tag: v3.0-rc1~347^2~1^2~107^2~33
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ecd015127813c7893f6900cf54c6362b26d8ff90;p=karo-tx-linux.git

ASoC: Convert WM8903 to table based DAPM setup

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
---

diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index ae1cadfae84c..a739e09a8309 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -926,7 +926,7 @@ SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0),
 };
 
-static const struct snd_soc_dapm_route intercon[] = {
+static const struct snd_soc_dapm_route wm8903_intercon[] = {
 
 	{ "CLK_DSP", NULL, "CLK_SYS" },
 	{ "Mic Bias", NULL, "CLK_SYS" },
@@ -1079,17 +1079,6 @@ static const struct snd_soc_dapm_route intercon[] = {
 	{ "Right Line Output PGA", NULL, "Charge Pump" },
 };
 
-static int wm8903_add_widgets(struct snd_soc_codec *codec)
-{
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
-
-	snd_soc_dapm_new_controls(dapm, wm8903_dapm_widgets,
-				  ARRAY_SIZE(wm8903_dapm_widgets));
-	snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
-	return 0;
-}
-
 static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
@@ -2020,7 +2009,6 @@ static int wm8903_probe(struct snd_soc_codec *codec)
 
 	snd_soc_add_controls(codec, wm8903_snd_controls,
 				ARRAY_SIZE(wm8903_snd_controls));
-	wm8903_add_widgets(codec);
 
 	wm8903_init_gpio(codec);
 
@@ -2046,6 +2034,10 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
 	.reg_cache_default = wm8903_reg_defaults,
 	.volatile_register = wm8903_volatile_register,
 	.seq_notifier = wm8903_seq_notifier,
+	.dapm_widgets = wm8903_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
+	.dapm_routes = wm8903_intercon,
+	.num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
 };
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)