From: Dave Jiang Date: Wed, 4 May 2011 23:16:44 +0000 (-0700) Subject: isci: renaming sas_capabilities to scic_phy_cap X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ed0e24830e7b744d0d0ae5936740f1cdbd0ec5ba;p=linux-beck.git isci: renaming sas_capabilities to scic_phy_cap This seems to be a data structure that represents the phy capabilities register from the hardware and has nothing to do with SAS data structs. Moving and fixup Signed-off-by: Dave Jiang Signed-off-by: Dan Williams --- diff --git a/drivers/scsi/isci/core/intel_sas.h b/drivers/scsi/isci/core/intel_sas.h index 61a5ececdd52..91c30cfee21d 100644 --- a/drivers/scsi/isci/core/intel_sas.h +++ b/drivers/scsi/isci/core/intel_sas.h @@ -111,42 +111,6 @@ struct sci_sas_identify_address_frame_protocols { }; -/** - * struct sas_capabilities - This structure depicts the various SAS - * capabilities supported by the directly attached target device. For - * specific information on each of these individual fields please reference - * the SAS specification Phy layer section on speed negotiation windows. - * - * - */ -struct sas_capabilities { - union { - struct { - /** - * The SAS specification indicates the start bit shall always be set to - * 1. This implementation will have the start bit set to 0 if the - * PHY CAPABILITIES were either not received or speed negotiation failed. - */ - u32 start:1; - u32 tx_ssc_type:1; - u32 reserved1:2; - u32 requested_logical_link_rate:4; - - u32 gen1_without_ssc_supported:1; - u32 gen1_with_ssc_supported:1; - u32 gen2_without_ssc_supported:1; - u32 gen2_with_ssc_supported:1; - u32 gen3_without_ssc_supported:1; - u32 gen3_with_ssc_supported:1; - u32 reserved2:17; - u32 parity:1; - } bits; - - u32 all; - } u; - -}; - /** * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS * specification defined task attribute values for a command information diff --git a/drivers/scsi/isci/core/scic_phy.h b/drivers/scsi/isci/core/scic_phy.h index 4e4a6b1f9953..8fcd3a4c5744 100644 --- a/drivers/scsi/isci/core/scic_phy.h +++ b/drivers/scsi/isci/core/scic_phy.h @@ -75,6 +75,34 @@ struct scic_sds_port; enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy); +struct scic_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + /** * struct scic_phy_properties - This structure defines the properties common to * all phys that can be retrieved. @@ -125,7 +153,7 @@ struct scic_sas_phy_properties { * This field delineates the Phy capabilities structure received * from the remote end point. */ - struct sas_capabilities received_capabilities; + struct scic_phy_cap rcvd_cap; }; diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 0e381cff25a9..bd2b30587703 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -122,12 +122,15 @@ static enum sci_status scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, struct scu_link_layer_registers __iomem *link_layer_registers) { - struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller; + struct scic_sds_controller *scic = + sci_phy->owning_port->owning_controller; int phy_idx = sci_phy->phy_index; - struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx]; - struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx]; + struct sci_phy_user_params *phy_user = + &scic->user_parameters.sds1.phys[phy_idx]; + struct sci_phy_oem_params *phy_oem = + &scic->oem_parameters.sds1.phys[phy_idx]; u32 phy_configuration; - struct sas_capabilities phy_capabilities; + struct scic_phy_cap phy_cap; u32 parity_check = 0; u32 parity_count = 0; u32 llctl, link_rate; @@ -146,7 +149,8 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, &sci_phy->link_layer_registers->transmit_identification); /* Write the device SAS Address */ - writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high); + writel(0xFEDCBA98, + &sci_phy->link_layer_registers->sas_device_name_high); writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low); /* Write the source SAS Address */ @@ -170,21 +174,21 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, &sci_phy->link_layer_registers->phy_configuration); /* Configure the SNW capabilities */ - phy_capabilities.u.all = 0; - phy_capabilities.u.bits.start = 1; - phy_capabilities.u.bits.gen3_without_ssc_supported = 1; - phy_capabilities.u.bits.gen2_without_ssc_supported = 1; - phy_capabilities.u.bits.gen1_without_ssc_supported = 1; + phy_cap.all = 0; + phy_cap.start = 1; + phy_cap.gen3_no_ssc = 1; + phy_cap.gen2_no_ssc = 1; + phy_cap.gen1_no_ssc = 1; if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) { - phy_capabilities.u.bits.gen3_with_ssc_supported = 1; - phy_capabilities.u.bits.gen2_with_ssc_supported = 1; - phy_capabilities.u.bits.gen1_with_ssc_supported = 1; + phy_cap.gen3_ssc = 1; + phy_cap.gen2_ssc = 1; + phy_cap.gen1_ssc = 1; } /* * The SAS specification indicates that the phy_capabilities that * are transmitted shall have an even parity. Calculate the parity. */ - parity_check = phy_capabilities.u.all; + parity_check = phy_cap.all; while (parity_check != 0) { if (parity_check & 0x1) parity_count++; @@ -195,10 +199,9 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy, * If parity indicates there are an odd number of bits set, then * set the parity bit to 1 in the phy capabilities. */ if ((parity_count % 2) != 0) - phy_capabilities.u.bits.parity = 1; + phy_cap.parity = 1; - writel(phy_capabilities.u.all, - &sci_phy->link_layer_registers->phy_capabilities); + writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities); /* Set the enable spinup period but disable the ability to send * notify enable spinup @@ -561,7 +564,7 @@ enum sci_status scic_sas_phy_get_properties( &sci_phy->phy_type.sas_id_frame, sizeof(struct sas_identify_frame)); - properties->received_capabilities.u.all = + properties->rcvd_cap.all = readl(&sci_phy->link_layer_registers->receive_phycap); return SCI_SUCCESS;