From: Lars-Peter Clausen Date: Sun, 23 Nov 2014 12:37:35 +0000 (+0100) Subject: ASoC: wm8974: Cleanup manual bias level transitions X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ed1358f508e1ebcb01e1e545c5330599098b7687;p=linux-beck.git ASoC: wm8974: Cleanup manual bias level transitions Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen Acked-by: Charles Keepax Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index 682e9eda1019..ff0e4646b934 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -568,18 +568,6 @@ static struct snd_soc_dai_driver wm8974_dai = { .symmetric_rates = 1, }; -static int wm8974_suspend(struct snd_soc_codec *codec) -{ - wm8974_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - -static int wm8974_resume(struct snd_soc_codec *codec) -{ - wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - return 0; -} - static const struct regmap_config wm8974_regmap = { .reg_bits = 7, .val_bits = 9, @@ -599,24 +587,13 @@ static int wm8974_probe(struct snd_soc_codec *codec) return ret; } - wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return ret; -} - -/* power down chip */ -static int wm8974_remove(struct snd_soc_codec *codec) -{ - wm8974_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } static struct snd_soc_codec_driver soc_codec_dev_wm8974 = { .probe = wm8974_probe, - .remove = wm8974_remove, - .suspend = wm8974_suspend, - .resume = wm8974_resume, .set_bias_level = wm8974_set_bias_level, + .suspend_bias_off = true, .controls = wm8974_snd_controls, .num_controls = ARRAY_SIZE(wm8974_snd_controls),