From: Olof Johansson Date: Wed, 19 Apr 2017 12:22:29 +0000 (-0700) Subject: Merge tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git... X-Git-Tag: v4.12-rc1~56^2~24 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ed50c4855eb388d7b1e0b03836e434aba1945072;hp=a47e34668046ad2029deb8110c41926af04e4142;p=karo-tx-linux.git Merge tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.12, round 1 Highlights: ---------- - ADD RTC support on STM32F746 MCU - Enable RTC on STM32F746 Eval board - Enable clocks on STM32F746 MCU - Enable DMA, pwm1 and pwm3 on STM32F429I Eval - Add support of STM32H743 MCU and his Eval board - Enable USB HS and FS on STM32F469 Disco board * tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: dt-bindings: Document the STM32 USB OTG DWC2 core binding ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco ARM: dts: stm32: Enable USB FS on stm32f469-disco ARM: dts: stm32: Add USB FS support for STM32F429 MCU ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval ARM: dts: stm32: Enable dma by default on stm32f4 adc ARM: dts: stm32: enable RTC on stm32746g-eval ARM: dts: stm32: Add RTC support for STM32F746 MCU ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746 dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file ARM: dts: stm32: Enable clocks for STM32F746 MCU Signed-off-by: Olof Johansson --- diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 6c7c2bce6d0c..00bea038639e 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -14,6 +14,10 @@ Required properties: - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; - snps,dwc2: A generic DWC2 USB controller with default parameters. + - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs + configured in FS mode; + - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs + configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt - clocks: clock provider specifier diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 889b8b9c9eb7..496648b9d539 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -776,7 +776,8 @@ dtb-$(CONFIG_ARCH_STM32)+= \ stm32f429-disco.dtb \ stm32f469-disco.dtb \ stm32429i-eval.dtb \ - stm32746g-eval.dtb + stm32746g-eval.dtb \ + stm32h743i-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 3c99466989b1..b6331146aa02 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -167,6 +167,34 @@ status = "okay"; }; +&timers1 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@0 { + status = "okay"; + }; +}; + +&timers3 { + status = "okay"; + + pwm { + pinctrl-0 = <&pwm3_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + timer@2 { + status = "okay"; + }; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index aa03fac1ec55..b5207588bdcb 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -89,6 +89,10 @@ clock-frequency = <25000000>; }; +&rtc { + status = "okay"; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 9222b9f37bc0..191fa50e34eb 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -88,6 +88,14 @@ gpios = <&gpioa 0 0>; }; }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + gpio = <&gpioc 4 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; }; &clk_hse { @@ -105,3 +113,11 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_hs { + compatible = "st,stm32f4x9-fsotg"; + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_b>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ee0da970e8ad..b2a2b5c38caa 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -450,6 +450,8 @@ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC1)>; interrupt-parent = <&adc>; interrupts = <0>; + dmas = <&dma2 0 0 0x400 0x0>; + dma-names = "rx"; status = "disabled"; }; @@ -460,6 +462,8 @@ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC2)>; interrupt-parent = <&adc>; interrupts = <1>; + dmas = <&dma2 3 1 0x400 0x0>; + dma-names = "rx"; status = "disabled"; }; @@ -470,6 +474,8 @@ clocks = <&rcc 0 STM32F4_APB2_CLOCK(ADC3)>; interrupt-parent = <&adc>; interrupts = <2>; + dmas = <&dma2 1 2 0x400 0x0>; + dma-names = "rx"; status = "disabled"; }; }; @@ -666,6 +672,28 @@ }; }; + usbotg_fs_pins_a: usbotg_fs@0 { + pins { + pinmux = , + , + ; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + + usbotg_fs_pins_b: usbotg_fs@1 { + pins { + pinmux = , + , + ; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; + usbotg_hs_pins_a: usbotg_hs@0 { pins { pinmux = , @@ -805,6 +833,15 @@ status = "disabled"; }; + usbotg_fs: usb@50000000 { + compatible = "st,stm32f4x9-fsotg"; + reg = <0x50000000 0x40000>; + interrupts = <67>; + clocks = <&rcc 0 39>; + clock-names = "otg"; + status = "disabled"; + }; + rng: rng@50060800 { compatible = "st,stm32-rng"; reg = <0x50060800 0x400>; diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 0dd56ef574fa..75470c34b92c 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -68,6 +68,15 @@ soc { dma-ranges = <0xc0000000 0x0 0x10000000>; }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpiob 2 0>; + regulator-name = "vcc5_host1"; + regulator-always-on; + }; }; &rcc { @@ -115,3 +124,10 @@ pinctrl-names = "default"; status = "okay"; }; + +&usbotg_fs { + dr_mode = "host"; + pinctrl-0 = <&usbotg_fs_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index f321ffe87144..bd8406b02a57 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -43,6 +43,8 @@ #include "skeleton.dtsi" #include "armv7-m.dtsi" #include +#include +#include / { clocks { @@ -51,6 +53,24 @@ compatible = "fixed-clock"; clock-frequency = <0>; }; + + clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + clk_i2s_ckin: clk-i2s-ckin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; }; soc { @@ -58,7 +78,7 @@ compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; interrupts = <28>; - clocks = <&rcc 0 128>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>; status = "disabled"; }; @@ -66,7 +86,7 @@ compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; interrupts = <29>; - clocks = <&rcc 0 129>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>; status = "disabled"; }; @@ -74,7 +94,7 @@ compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; interrupts = <30>; - clocks = <&rcc 0 130>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>; status = "disabled"; }; @@ -82,14 +102,14 @@ compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&rcc 0 131>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>; }; timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; interrupts = <54>; - clocks = <&rcc 0 132>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>; status = "disabled"; }; @@ -97,7 +117,21 @@ compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; interrupts = <55>; - clocks = <&rcc 0 133>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>; + status = "disabled"; + }; + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + clock-names = "ck_rtc"; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + interrupt-names = "alarm"; + st,syscfg = <&pwrcfg>; status = "disabled"; }; @@ -105,7 +139,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40004400 0x400>; interrupts = <38>; - clocks = <&rcc 0 145>; + clocks = <&rcc 1 CLK_USART2>; status = "disabled"; }; @@ -113,7 +147,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40004800 0x400>; interrupts = <39>; - clocks = <&rcc 0 146>; + clocks = <&rcc 1 CLK_USART3>; status = "disabled"; }; @@ -121,7 +155,7 @@ compatible = "st,stm32f7-uart"; reg = <0x40004c00 0x400>; interrupts = <52>; - clocks = <&rcc 0 147>; + clocks = <&rcc 1 CLK_UART4>; status = "disabled"; }; @@ -129,7 +163,7 @@ compatible = "st,stm32f7-uart"; reg = <0x40005000 0x400>; interrupts = <53>; - clocks = <&rcc 0 148>; + clocks = <&rcc 1 CLK_UART5>; status = "disabled"; }; @@ -137,7 +171,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40007800 0x400>; interrupts = <82>; - clocks = <&rcc 0 158>; + clocks = <&rcc 1 CLK_UART7>; status = "disabled"; }; @@ -145,7 +179,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; - clocks = <&rcc 0 159>; + clocks = <&rcc 1 CLK_UART8>; status = "disabled"; }; @@ -153,7 +187,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40011000 0x400>; interrupts = <37>; - clocks = <&rcc 0 164>; + clocks = <&rcc 1 CLK_USART1>; status = "disabled"; }; @@ -161,7 +195,7 @@ compatible = "st,stm32f7-usart", "st,stm32f7-uart"; reg = <0x40011400 0x400>; interrupts = <71>; - clocks = <&rcc 0 165>; + clocks = <&rcc 1 CLK_USART6>; status = "disabled"; }; @@ -178,6 +212,11 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + pwrcfg: power-config@40007000 { + compatible = "syscon"; + reg = <0x40007000 0x400>; + }; + pin-controller { #address-cells = <1>; #size-cells = <1>; @@ -191,7 +230,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x0 0x400>; - clocks = <&rcc 0 256>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>; st,bank-name = "GPIOA"; }; @@ -199,7 +238,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x400 0x400>; - clocks = <&rcc 0 257>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>; st,bank-name = "GPIOB"; }; @@ -207,7 +246,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x800 0x400>; - clocks = <&rcc 0 258>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>; st,bank-name = "GPIOC"; }; @@ -215,7 +254,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0xc00 0x400>; - clocks = <&rcc 0 259>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>; st,bank-name = "GPIOD"; }; @@ -223,7 +262,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1000 0x400>; - clocks = <&rcc 0 260>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>; st,bank-name = "GPIOE"; }; @@ -231,7 +270,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1400 0x400>; - clocks = <&rcc 0 261>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>; st,bank-name = "GPIOF"; }; @@ -239,7 +278,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1800 0x400>; - clocks = <&rcc 0 262>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>; st,bank-name = "GPIOG"; }; @@ -247,7 +286,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x1c00 0x400>; - clocks = <&rcc 0 263>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>; st,bank-name = "GPIOH"; }; @@ -255,7 +294,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2000 0x400>; - clocks = <&rcc 0 264>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>; st,bank-name = "GPIOI"; }; @@ -263,7 +302,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2400 0x400>; - clocks = <&rcc 0 265>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>; st,bank-name = "GPIOJ"; }; @@ -271,7 +310,7 @@ gpio-controller; #gpio-cells = <2>; reg = <0x2800 0x400>; - clocks = <&rcc 0 266>; + clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>; st,bank-name = "GPIOK"; }; @@ -291,9 +330,12 @@ rcc: rcc@40023800 { #clock-cells = <2>; - compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + compatible = "st,stm32f746-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; - clocks = <&clk_hse>; + clocks = <&clk_hse>, <&clk_i2s_ckin>; + st,syscfg = <&pwrcfg>; + assigned-clocks = <&rcc 1 CLK_HSE_RTC>; + assigned-clock-rates = <1000000>; }; }; }; diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi new file mode 100644 index 000000000000..fcc1e0640233 --- /dev/null +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -0,0 +1,156 @@ +/* + * Copyright 2017 - Alexandre Torgue + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include + +/ { + soc { + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32h743-pinctrl"; + ranges = <0 0x58020000 0x3000>; + pins-are-numbered; + + gpioa: gpio@58020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@58020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@58020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@58020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@58021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@58021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@58021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@58021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@58022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@58022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@58022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&timer_clk>; + st,bank-name = "GPIOK"; + }; + + usart1_pins: usart1@0 { + pins1 { + pinmux = ; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; + bias-disable; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi new file mode 100644 index 000000000000..46856298ee16 --- /dev/null +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -0,0 +1,83 @@ +/* + * Copyright 2017 - Alexandre Torgue + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include "armv7-m.dtsi" + +/ { + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + timer_clk: timer-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + }; + + soc { + usart1: serial@40011000 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + status = "disabled"; + clocks = <&timer_clk>; + + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&timer_clk>; + }; + }; +}; + +&systick { + clock-frequency = <250000000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts new file mode 100644 index 000000000000..c6effbb36e4a --- /dev/null +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -0,0 +1,74 @@ +/* + * Copyright 2017 - Alexandre Torgue + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32h743.dtsi" +#include "stm32h743-pinctrl.dtsi" + +/ { + model = "STMicroelectronics STM32H743i-EVAL board"; + compatible = "st,stm32h743i-eval", "st,stm32h743"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xd0000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + }; +}; + +&clk_hse { + clock-frequency = <125000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h new file mode 100644 index 000000000000..e36cc69959c7 --- /dev/null +++ b/include/dt-bindings/mfd/stm32f7-rcc.h @@ -0,0 +1,112 @@ +/* + * This header provides constants for the STM32F7 RCC IP + */ + +#ifndef _DT_BINDINGS_MFD_STM32F7_RCC_H +#define _DT_BINDINGS_MFD_STM32F7_RCC_H + +/* AHB1 */ +#define STM32F7_RCC_AHB1_GPIOA 0 +#define STM32F7_RCC_AHB1_GPIOB 1 +#define STM32F7_RCC_AHB1_GPIOC 2 +#define STM32F7_RCC_AHB1_GPIOD 3 +#define STM32F7_RCC_AHB1_GPIOE 4 +#define STM32F7_RCC_AHB1_GPIOF 5 +#define STM32F7_RCC_AHB1_GPIOG 6 +#define STM32F7_RCC_AHB1_GPIOH 7 +#define STM32F7_RCC_AHB1_GPIOI 8 +#define STM32F7_RCC_AHB1_GPIOJ 9 +#define STM32F7_RCC_AHB1_GPIOK 10 +#define STM32F7_RCC_AHB1_CRC 12 +#define STM32F7_RCC_AHB1_BKPSRAM 18 +#define STM32F7_RCC_AHB1_DTCMRAM 20 +#define STM32F7_RCC_AHB1_DMA1 21 +#define STM32F7_RCC_AHB1_DMA2 22 +#define STM32F7_RCC_AHB1_DMA2D 23 +#define STM32F7_RCC_AHB1_ETHMAC 25 +#define STM32F7_RCC_AHB1_ETHMACTX 26 +#define STM32F7_RCC_AHB1_ETHMACRX 27 +#define STM32FF_RCC_AHB1_ETHMACPTP 28 +#define STM32F7_RCC_AHB1_OTGHS 29 +#define STM32F7_RCC_AHB1_OTGHSULPI 30 + +#define STM32F7_AHB1_RESET(bit) (STM32F7_RCC_AHB1_##bit + (0x10 * 8)) +#define STM32F7_AHB1_CLOCK(bit) (STM32F7_RCC_AHB1_##bit) + + +/* AHB2 */ +#define STM32F7_RCC_AHB2_DCMI 0 +#define STM32F7_RCC_AHB2_CRYP 4 +#define STM32F7_RCC_AHB2_HASH 5 +#define STM32F7_RCC_AHB2_RNG 6 +#define STM32F7_RCC_AHB2_OTGFS 7 + +#define STM32F7_AHB2_RESET(bit) (STM32F7_RCC_AHB2_##bit + (0x14 * 8)) +#define STM32F7_AHB2_CLOCK(bit) (STM32F7_RCC_AHB2_##bit + 0x20) + +/* AHB3 */ +#define STM32F7_RCC_AHB3_FMC 0 +#define STM32F7_RCC_AHB3_QSPI 1 + +#define STM32F7_AHB3_RESET(bit) (STM32F7_RCC_AHB3_##bit + (0x18 * 8)) +#define STM32F7_AHB3_CLOCK(bit) (STM32F7_RCC_AHB3_##bit + 0x40) + +/* APB1 */ +#define STM32F7_RCC_APB1_TIM2 0 +#define STM32F7_RCC_APB1_TIM3 1 +#define STM32F7_RCC_APB1_TIM4 2 +#define STM32F7_RCC_APB1_TIM5 3 +#define STM32F7_RCC_APB1_TIM6 4 +#define STM32F7_RCC_APB1_TIM7 5 +#define STM32F7_RCC_APB1_TIM12 6 +#define STM32F7_RCC_APB1_TIM13 7 +#define STM32F7_RCC_APB1_TIM14 8 +#define STM32F7_RCC_APB1_LPTIM1 9 +#define STM32F7_RCC_APB1_WWDG 11 +#define STM32F7_RCC_APB1_SPI2 14 +#define STM32F7_RCC_APB1_SPI3 15 +#define STM32F7_RCC_APB1_SPDIFRX 16 +#define STM32F7_RCC_APB1_UART2 17 +#define STM32F7_RCC_APB1_UART3 18 +#define STM32F7_RCC_APB1_UART4 19 +#define STM32F7_RCC_APB1_UART5 20 +#define STM32F7_RCC_APB1_I2C1 21 +#define STM32F7_RCC_APB1_I2C2 22 +#define STM32F7_RCC_APB1_I2C3 23 +#define STM32F7_RCC_APB1_I2C4 24 +#define STM32F7_RCC_APB1_CAN1 25 +#define STM32F7_RCC_APB1_CAN2 26 +#define STM32F7_RCC_APB1_CEC 27 +#define STM32F7_RCC_APB1_PWR 28 +#define STM32F7_RCC_APB1_DAC 29 +#define STM32F7_RCC_APB1_UART7 30 +#define STM32F7_RCC_APB1_UART8 31 + +#define STM32F7_APB1_RESET(bit) (STM32F7_RCC_APB1_##bit + (0x20 * 8)) +#define STM32F7_APB1_CLOCK(bit) (STM32F7_RCC_APB1_##bit + 0x80) + +/* APB2 */ +#define STM32F7_RCC_APB2_TIM1 0 +#define STM32F7_RCC_APB2_TIM8 1 +#define STM32F7_RCC_APB2_USART1 4 +#define STM32F7_RCC_APB2_USART6 5 +#define STM32F7_RCC_APB2_ADC1 8 +#define STM32F7_RCC_APB2_ADC2 9 +#define STM32F7_RCC_APB2_ADC3 10 +#define STM32F7_RCC_APB2_SDMMC1 11 +#define STM32F7_RCC_APB2_SPI1 12 +#define STM32F7_RCC_APB2_SPI4 13 +#define STM32F7_RCC_APB2_SYSCFG 14 +#define STM32F7_RCC_APB2_TIM9 16 +#define STM32F7_RCC_APB2_TIM10 17 +#define STM32F7_RCC_APB2_TIM11 18 +#define STM32F7_RCC_APB2_SPI5 20 +#define STM32F7_RCC_APB2_SPI6 21 +#define STM32F7_RCC_APB2_SAI1 22 +#define STM32F7_RCC_APB2_SAI2 23 +#define STM32F7_RCC_APB2_LTDC 26 + +#define STM32F7_APB2_RESET(bit) (STM32F7_RCC_APB2_##bit + (0x24 * 8)) +#define STM32F7_APB2_CLOCK(bit) (STM32F7_RCC_APB2_##bit + 0xA0) + +#endif /* _DT_BINDINGS_MFD_STM32F7_RCC_H */