From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Fri, 8 Jun 2007 13:14:27 +0000 (+0200)
Subject: serverworks: remove crappy code
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ed84fad5002c00dfb318f797dbf591320eebc1c0;p=linux-beck.git

serverworks: remove crappy code

Remove crappy code noticed by Linus, see

	http://lkml.org/lkml/2007/5/23/476

for details.

While at it simplify logic a bit.

There should be no functionality changes caused by this patch.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---

diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 47bcd91c9b5f..b04c99059c05 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -1,5 +1,5 @@
 /*
- * linux/drivers/ide/pci/serverworks.c		Version 0.9	Mar 4 2007
+ * linux/drivers/ide/pci/serverworks.c		Version 0.10	Jun 2 2007
  *
  * Copyright (C) 1998-2000 Michel Aubry
  * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
@@ -170,7 +170,6 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		if (!drive->init_speed) {
 			u8 dma_stat = inb(hwif->dma_status);
 
-dma_pio:
 			if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) &&
 			    ((dma_stat & (1<<(5+unit))) == (1<<(5+unit)))) {
 				drive->current_speed = drive->init_speed = XFER_UDMA_0 + udma_modes[(ultra_timing >> (4*unit)) & ~(0xF0)];
@@ -179,7 +178,6 @@ dma_pio:
 				   ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) {
 				u8 dmaspeed = dma_timing;
 
-				dma_timing &= ~0xFFU;
 				if ((dmaspeed & 0x20) == 0x20)
 					dmaspeed = XFER_MW_DMA_2;
 				else if ((dmaspeed & 0x21) == 0x21)
@@ -190,10 +188,11 @@ dma_pio:
 					goto dma_pio;
 				drive->current_speed = drive->init_speed = dmaspeed;
 				return 0;
-			} else if (pio_timing) {
+			}
+dma_pio:
+			if (pio_timing) {
 				u8 piospeed = pio_timing;
 
-				pio_timing &= ~0xFFU;
 				if ((piospeed & 0x20) == 0x20)
 					piospeed = XFER_PIO_4;
 				else if ((piospeed & 0x22) == 0x22)
@@ -214,8 +213,8 @@ dma_pio:
 
 oem_setup_failed:
 
-	pio_timing	&= ~0xFFU;
-	dma_timing	&= ~0xFFU;
+	pio_timing	= 0;
+	dma_timing	= 0;
 	ultra_timing	&= ~(0x0F << (4*unit));
 	ultra_enable	&= ~(0x01 << drive->dn);
 	csb5_pio	&= ~(0x0F << (4*drive->dn));