From: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Date: Fri, 19 May 2017 14:48:00 +0000 (+0300)
Subject: iio: hi8435: avoid garbage event at first enable
X-Git-Tag: v4.13-rc1~184^2~262^2~15
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ee19ac340c5fdfd89c6348be4563453c61ab54a9;p=karo-tx-linux.git

iio: hi8435: avoid garbage event at first enable

Currently, driver generates events for channels if new reading differs
from previous one. This "previous value" is initialized to zero, which
results into event if value is constant-one.

Fix that by initializing "previous value" by reading at event enable
time.

This provides reliable sequence for userspace:
- enable event,
- AFTER THAT read current value,
- AFTER THAT each event will correspond to change.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
---

diff --git a/drivers/iio/adc/hi8435.c b/drivers/iio/adc/hi8435.c
index cb8e6342eddf..45a92e3e8f2b 100644
--- a/drivers/iio/adc/hi8435.c
+++ b/drivers/iio/adc/hi8435.c
@@ -141,10 +141,21 @@ static int hi8435_write_event_config(struct iio_dev *idev,
 				     enum iio_event_direction dir, int state)
 {
 	struct hi8435_priv *priv = iio_priv(idev);
+	int ret;
+	u32 tmp;
+
+	if (state) {
+		ret = hi8435_readl(priv, HI8435_SO31_0_REG, &tmp);
+		if (ret < 0)
+			return ret;
+		if (tmp & BIT(chan->channel))
+			priv->event_prev_val |= BIT(chan->channel);
+		else
+			priv->event_prev_val &= ~BIT(chan->channel);
 
-	priv->event_scan_mask &= ~BIT(chan->channel);
-	if (state)
 		priv->event_scan_mask |= BIT(chan->channel);
+	} else
+		priv->event_scan_mask &= ~BIT(chan->channel);
 
 	return 0;
 }