From: Sergej.Stepanov@ids.de Date: Tue, 23 Nov 2010 17:38:36 +0000 (+0100) Subject: mtd: fsl_elbc_nand: fix jffs2 problem after NAND-flash image record in u-boot X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=eeda667a29698b9a4d16dce8979afc6f512f3c42;p=linux-beck.git mtd: fsl_elbc_nand: fix jffs2 problem after NAND-flash image record in u-boot This patch should fix the following problem: 1. the jffs2-image update in the u-boot was ok 2. first restart and first mount of the NAND-flash-partition was also ok 3. before the restart of controller there are no any activity on NAND-flash except of the jffs2_gcd_mtdX-process ... 4. BUT after the second restart the NAND-flash-partition could not be really used after the second mount, dmesg filled with messages: ... jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03ce0000: 0xc0ff instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x03d00000: 0xc0ff instead .... Just for for info: the behaviour observed on mpc8313-based board with the large-page NAND. The only activity on NAND-flash was the garbage collector process, that looks for CLEANMARKER-nodes As Scott said it was broken by commit 3ab8f2a2e7011c5e83363b42950757e46ef06824 Signed-off-by: Sergej Stepanov -- Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index c141b07b25d1..7a13d42cbabd 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -388,6 +388,8 @@ static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command, "page_addr: 0x%x, column: 0x%x.\n", page_addr, column); + elbc_fcm_ctrl->column = column; + elbc_fcm_ctrl->oob = 0; elbc_fcm_ctrl->use_mdr = 1; fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |