From: Takahiro Shimizu Date: Fri, 20 Apr 2012 18:50:30 +0000 (+0000) Subject: pch_gbe: reprogram multicast address register on reset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=eefc48b078e1c74c701e8b44a56717418e9cd2bb;p=linux-beck.git pch_gbe: reprogram multicast address register on reset The reset logic after a Rx FIFO overrun will clear the programmed multicast addresses. This patch fixes the issue by reprogramming the registers after the reset. [ RC - Rebased Takahiro's changes and wrote a commit message explaining the changes. ] Signed-off-by: Takahiro Shimizu Signed-off-by: Richard Cochran Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c index 6a9a63bcb408..dc15e9315f32 100644 --- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c +++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c @@ -382,32 +382,86 @@ static void pch_gbe_mac_mar_set(struct pch_gbe_hw *hw, u8 * addr, u32 index) pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); } +/** + * pch_gbe_mac_save_mac_addr_regs - Save MAC addresse registers + * @hw: Pointer to the HW structure + * @addr: Pointer to the MAC address + * @index: MAC address array register + */ +static void +pch_gbe_mac_save_mac_addr_regs(struct pch_gbe_hw *hw, + struct pch_gbe_regs_mac_adr *mac_adr, u32 index) +{ + mac_adr->high = ioread32(&hw->reg->mac_adr[index].high); + mac_adr->low = ioread32(&hw->reg->mac_adr[index].low); +} + +/** + * pch_gbe_mac_store_mac_addr_regs - Store MAC addresse registers + * @hw: Pointer to the HW structure + * @addr: Pointer to the MAC address + * @index: MAC address array register + */ +static void +pch_gbe_mac_store_mac_addr_regs(struct pch_gbe_hw *hw, + struct pch_gbe_regs_mac_adr *mac_adr, u32 index) +{ + u32 adrmask; + + adrmask = ioread32(&hw->reg->ADDR_MASK); + iowrite32((adrmask | (0x0001 << index)), &hw->reg->ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); + /* Set the MAC address to the MAC address xA/xB register */ + iowrite32(mac_adr->high, &hw->reg->mac_adr[index].high); + iowrite32(mac_adr->low, &hw->reg->mac_adr[index].low); + iowrite32((adrmask & ~(0x0001 << index)), &hw->reg->ADDR_MASK); + /* wait busy */ + pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY); +} + +#define MAC_ADDR_LIST_NUM 16 /** * pch_gbe_mac_reset_hw - Reset hardware * @hw: Pointer to the HW structure */ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) { + struct pch_gbe_regs_mac_adr mac_addr_list[MAC_ADDR_LIST_NUM]; + int i; + /* Read the MAC address. and store to the private data */ pch_gbe_mac_read_mac_addr(hw); + /* Read other MAC addresses */ + for (i = 1; i < MAC_ADDR_LIST_NUM; i++) + pch_gbe_mac_save_mac_addr_regs(hw, &mac_addr_list[i], i); iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET); #ifdef PCH_GBE_MAC_IFOP_RGMII iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE); #endif pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST); - /* Setup the receive address */ + /* Setup the receive addresses */ pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + for (i = 1; i < MAC_ADDR_LIST_NUM; i++) + pch_gbe_mac_store_mac_addr_regs(hw, &mac_addr_list[i], i); return; } static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) { - /* Read the MAC address. and store to the private data */ + struct pch_gbe_regs_mac_adr mac_addr_list[MAC_ADDR_LIST_NUM]; + int i; + + /* Read the MAC addresses. and store to the private data */ pch_gbe_mac_read_mac_addr(hw); + for (i = 1; i < MAC_ADDR_LIST_NUM; i++) + pch_gbe_mac_save_mac_addr_regs(hw, &mac_addr_list[i], i); iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET); pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST); - /* Setup the MAC address */ + /* Setup the MAC addresses */ pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + for (i = 1; i < MAC_ADDR_LIST_NUM; i++) + pch_gbe_mac_store_mac_addr_regs(hw, &mac_addr_list[i], i); return; }