From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 15 Jan 2015 21:22:35 +0000 (+0000)
Subject: x86/smpboot: Cleanup ioapic handling
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ef4c59a4b64c62f977187cae444aee25bebb02fe;p=linux-beck.git

x86/smpboot: Cleanup ioapic handling

smpboot is very creative with the ways to disable ioapic.

smpboot_clear_io_apic() smpboot_clear_io_apic_irqs() and
disable_ioapic_support() serve a similar purpose.

smpboot_clear_io_apic_irqs() is the most useless of all
functions as it clears a variable which has not been setup yet.

Aside of that it has the same ifdef mess and conditionals around the
ioapic related code, which can now be removed.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/20150115211703.650280684@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 110ed1145e27..ca7f7b696f07 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -103,13 +103,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
 
 atomic_t init_deasserted;
 
-static inline void smpboot_clear_io_apic_irqs(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	io_apic_irqs = 0;
-#endif
-}
-
 static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 {
 	unsigned long flags;
@@ -147,27 +140,6 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
 }
 
-static inline void __init smpboot_setup_io_apic(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	/*
-	 * Here we can be sure that there is an IO-APIC in the system. Let's
-	 * go and set it up:
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else
-		nr_ioapics = 0;
-#endif
-}
-
-static inline void smpboot_clear_io_apic(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	nr_ioapics = 0;
-#endif
-}
-
 /*
  * Report back to the Boot Processor during boot time or to the caller processor
  * during CPU online.
@@ -1019,9 +991,10 @@ void arch_disable_smp_support(void)
  */
 static __init void disable_smp(void)
 {
+	disable_ioapic_support();
+
 	init_cpu_present(cpumask_of(0));
 	init_cpu_possible(cpumask_of(0));
-	smpboot_clear_io_apic_irqs();
 
 	if (smp_found_config)
 		physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map);
@@ -1105,7 +1078,6 @@ static int __init smp_sanity_check(unsigned max_cpus)
 				boot_cpu_physical_apicid);
 			pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n");
 		}
-		smpboot_clear_io_apic();
 		disable_ioapic_support();
 		return -1;
 	}
@@ -1117,7 +1089,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
 	 */
 	if (!max_cpus) {
 		pr_info("SMP mode deactivated\n");
-		smpboot_clear_io_apic();
+		disable_ioapic_support();
 
 		connect_bsp_APIC();
 		setup_local_APIC();
@@ -1191,18 +1163,15 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	else
 		cpu0_logical_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
 
-	/*
-	 * Enable IO APIC before setting up error vector
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		enable_IO_APIC();
+	/* Enable IO APIC before setting up error vector */
+	enable_IO_APIC();
 
 	bsp_end_local_APIC_setup();
-	smpboot_setup_io_apic();
+	setup_IO_APIC();
+
 	/*
 	 * Set up local APIC timer on boot CPU.
 	 */
-
 	pr_info("CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
 	x86_init.timers.setup_percpu_clockev();
@@ -1241,9 +1210,7 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 
 	nmi_selftest();
 	impress_friends();
-#ifdef CONFIG_X86_IO_APIC
 	setup_ioapic_dest();
-#endif
 	mtrr_aps_init();
 }