From: Jesse Brandeburg Date: Fri, 4 Nov 2011 05:47:06 +0000 (+0000) Subject: e1000e: convert to real ndo_set_rx_mode X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=ef9b965a1c4ebd0f0ee961dbc328e1222dc8f487;p=linux-beck.git e1000e: convert to real ndo_set_rx_mode Commit afc4b13d (net: remove use of ndo_set_multicast_list in drivers) changed e1000e to use the ndo_set_rx_mode entry point, but didn't implement the unicast address programming functionality. Implement it to achieve the ability to add unicast addresses. Signed-off-by: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a855db1ad249..80e69d37b3c7 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3113,79 +3113,147 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) } /** - * e1000_update_mc_addr_list - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program + * e1000e_write_mc_addr_list - write multicast addresses to MTA + * @netdev: network interface device structure * - * Updates the Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. + * Writes multicast address list to the MTA hash table. + * Returns: -ENOMEM on failure + * 0 on no addresses written + * X on writing X addresses to MTA + */ +static int e1000e_write_mc_addr_list(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct netdev_hw_addr *ha; + u8 *mta_list; + int i; + + if (netdev_mc_empty(netdev)) { + /* nothing to program, so clear mc list */ + hw->mac.ops.update_mc_addr_list(hw, NULL, 0); + return 0; + } + + mta_list = kzalloc(netdev_mc_count(netdev) * ETH_ALEN, GFP_ATOMIC); + if (!mta_list) + return -ENOMEM; + + /* update_mc_addr_list expects a packed array of only addresses. */ + i = 0; + netdev_for_each_mc_addr(ha, netdev) + memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); + + hw->mac.ops.update_mc_addr_list(hw, mta_list, i); + kfree(mta_list); + + return netdev_mc_count(netdev); +} + +/** + * e1000e_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table **/ -static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count) +static int e1000e_write_uc_addr_list(struct net_device *netdev) { - hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count); + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned int rar_entries = hw->mac.rar_entry_count; + int count = 0; + + /* save a rar entry for our hardware address */ + rar_entries--; + + /* save a rar entry for the LAA workaround */ + if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) + rar_entries--; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > rar_entries) + return -ENOMEM; + + if (!netdev_uc_empty(netdev) && rar_entries) { + struct netdev_hw_addr *ha; + + /* + * write the addresses in reverse order to avoid write + * combining + */ + netdev_for_each_uc_addr(ha, netdev) { + if (!rar_entries) + break; + e1000e_rar_set(hw, ha->addr, rar_entries--); + count++; + } + } + + /* zero out the remaining RAR entries not used above */ + for (; rar_entries > 0; rar_entries--) { + ew32(RAH(rar_entries), 0); + ew32(RAL(rar_entries), 0); + } + e1e_flush(); + + return count; } /** - * e1000_set_multi - Multicast and Promiscuous mode set + * e1000e_set_rx_mode - secondary unicast, Multicast and Promiscuous mode set * @netdev: network interface device structure * - * The set_multi entry point is called whenever the multicast address - * list or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper multicast, + * The ndo_set_rx_mode entry point is called whenever the unicast or multicast + * address list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast, * promiscuous mode, and all-multi behavior. **/ -static void e1000_set_multi(struct net_device *netdev) +static void e1000e_set_rx_mode(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - struct netdev_hw_addr *ha; - u8 *mta_list; u32 rctl; /* Check for Promiscuous and All Multicast modes */ - rctl = er32(RCTL); + /* clear the affected bits */ + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); + if (netdev->flags & IFF_PROMISC) { rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); - rctl &= ~E1000_RCTL_VFE; /* Do not hardware filter VLANs in promisc mode */ e1000e_vlan_filter_disable(adapter); } else { + int count; if (netdev->flags & IFF_ALLMULTI) { rctl |= E1000_RCTL_MPE; - rctl &= ~E1000_RCTL_UPE; } else { - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + count = e1000e_write_mc_addr_list(netdev); + if (count < 0) + rctl |= E1000_RCTL_MPE; } e1000e_vlan_filter_enable(adapter); - } - - ew32(RCTL, rctl); - - if (!netdev_mc_empty(netdev)) { - int i = 0; - - mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); - if (!mta_list) - return; - - /* prepare a packed array of only addresses. */ - netdev_for_each_mc_addr(ha, netdev) - memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); - - e1000_update_mc_addr_list(hw, mta_list, i); - kfree(mta_list); - } else { /* - * if we're called from probe, we might not have - * anything to do here, so clear out the list + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode */ - e1000_update_mc_addr_list(hw, NULL, 0); + count = e1000e_write_uc_addr_list(netdev); + if (count < 0) + rctl |= E1000_RCTL_UPE; } + ew32(RCTL, rctl); + if (netdev->features & NETIF_F_HW_VLAN_RX) e1000e_vlan_strip_enable(adapter); else @@ -3198,7 +3266,7 @@ static void e1000_set_multi(struct net_device *netdev) **/ static void e1000_configure(struct e1000_adapter *adapter) { - e1000_set_multi(adapter->netdev); + e1000e_set_rx_mode(adapter->netdev); e1000_restore_vlan(adapter); e1000_init_manageability_pt(adapter); @@ -5331,7 +5399,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, if (wufc) { e1000_setup_rctl(adapter); - e1000_set_multi(netdev); + e1000e_set_rx_mode(netdev); /* turn on all-multi mode if wake on multicast is enabled */ if (wufc & E1000_WUFC_MC) { @@ -5884,7 +5952,7 @@ static const struct net_device_ops e1000e_netdev_ops = { .ndo_stop = e1000_close, .ndo_start_xmit = e1000_xmit_frame, .ndo_get_stats64 = e1000e_get_stats64, - .ndo_set_rx_mode = e1000_set_multi, + .ndo_set_rx_mode = e1000e_set_rx_mode, .ndo_set_mac_address = e1000_set_mac, .ndo_change_mtu = e1000_change_mtu, .ndo_do_ioctl = e1000_ioctl, @@ -6076,6 +6144,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, NETIF_F_TSO6 | NETIF_F_HW_CSUM); + netdev->priv_flags |= IFF_UNICAST_FLT; + if (pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; netdev->vlan_features |= NETIF_F_HIGHDMA;