From: Kashyap, Desai Date: Tue, 4 Jan 2011 06:04:17 +0000 (+0530) Subject: [SCSI] mpt2sas: fix internal device reset for older firmware prior to MPI Rev K X-Git-Tag: v2.6.38-rc4~20^2~7 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=efe82a16bc0f9f9e1fc8fa706eb0309fcd57770a;p=karo-tx-linux.git [SCSI] mpt2sas: fix internal device reset for older firmware prior to MPI Rev K The "internal device reset complete" event is not supported for older firmware prior to MPI Rev K We added a check in the driver so the "internal device reset" event is ignored for older firmware. When ignored, the tm_busy flag doesn't get set nor cleared. Without this fix, IO queues would be froozen indefinetly after the "internal device reset" event, as the "complete" event never sent to clear the flag. Signed-off-by: Kashyap Desai Cc: stable@kernel.org Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 95d82743d7b1..a16f2a05736f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5002,6 +5002,12 @@ _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, event_data); #endif + /* In MPI Revision K (0xC), the internal device reset complete was + * implemented, so avoid setting tm_busy flag for older firmware. + */ + if ((ioc->facts.HeaderVersion >> 8) < 0xC) + return; + if (event_data->ReasonCode != MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET && event_data->ReasonCode !=