From: Sascha Hauer Date: Tue, 8 Feb 2011 20:08:59 +0000 (+0100) Subject: spi/imx: select master mode for all channels X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f020c39e51b1ef8389d5cf38190d32f55ff9d556;p=linux-beck.git spi/imx: select master mode for all channels The hardware seems to have a race condition when the inactive channels are in slave mode. We support master mode only, so we can just switch all channels to master mode. Signed-off-by: Sascha Hauer [ukleinek: add more verbose comment about the race] Signed-off-by: Uwe Kleine-König Signed-off-by: Grant Likely --- diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 1cf9d5faabf4..69d6dba67c19 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -174,7 +174,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, #define SPI_IMX2_3_CTRL 0x08 #define SPI_IMX2_3_CTRL_ENABLE (1 << 0) #define SPI_IMX2_3_CTRL_XCH (1 << 2) -#define SPI_IMX2_3_CTRL_MODE(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CTRL_MODE_MASK (0xf << 4) #define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 #define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 #define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) @@ -253,8 +253,14 @@ static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, { u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; - /* set master mode */ - ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs); + /* + * The hardware seems to have a race condition when changing modes. The + * current assumption is that the selection of the channel arrives + * earlier in the hardware than the mode bits when they are written at + * the same time. + * So set master mode for all channels as we do not support slave mode. + */ + ctrl |= SPI_IMX2_3_CTRL_MODE_MASK; /* set clock speed */ ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);