From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Mon, 3 Jul 2006 16:01:59 +0000 (-0400)
Subject: [PATCH] ieee1394: fix calculation of csr->expire
X-Git-Tag: v2.6.19-rc1~644^2~47
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f0cbefe63c4347044fffebca24c03f3c6829f322;p=karo-tx-linux.git

[PATCH] ieee1394: fix calculation of csr->expire

This variant of calculate_expire() is more correct and easier to read.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
---

diff --git a/drivers/ieee1394/csr.c b/drivers/ieee1394/csr.c
index 149573db91c5..ab0c80f61b9d 100644
--- a/drivers/ieee1394/csr.c
+++ b/drivers/ieee1394/csr.c
@@ -17,11 +17,13 @@
  *
  */
 
-#include <linux/string.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/param.h>
 #include <linux/spinlock.h>
+#include <linux/string.h>
 
 #include "csr1212.h"
 #include "ieee1394_types.h"
@@ -149,31 +151,18 @@ static void host_reset(struct hpsb_host *host)
 
 /*
  * HI == seconds (bits 0:2)
- * LO == fraction units of 1/8000 of a second, as per 1394 (bits 19:31)
- *
- * Convert to units and then to HZ, for comparison to jiffies.
- *
- * By default this will end up being 800 units, or 100ms (125usec per
- * unit).
+ * LO == fractions of a second in units of 125usec (bits 19:31)
  *
- * NOTE: The spec says 1/8000, but also says we can compute based on 1/8192
- * like CSR specifies. Should make our math less complex.
+ * Convert SPLIT_TIMEOUT to jiffies.
+ * The default and minimum as per 1394a-2000 clause 8.3.2.2.6 is 100ms.
  */
 static inline void calculate_expire(struct csr_control *csr)
 {
-	unsigned long units;
-
-	/* Take the seconds, and convert to units */
-	units = (unsigned long)(csr->split_timeout_hi & 0x07) << 13;
-
-	/* Add in the fractional units */
-	units += (unsigned long)(csr->split_timeout_lo >> 19);
-
-	/* Convert to jiffies */
-	csr->expire = (unsigned long)(units * HZ) >> 13UL;
+	unsigned long usecs =
+		(csr->split_timeout_hi & 0x07) * USEC_PER_SEC +
+		(csr->split_timeout_lo >> 19) * 125L;
 
-	/* Just to keep from rounding low */
-	csr->expire++;
+	csr->expire = usecs_to_jiffies(usecs > 100000L ? usecs : 100000L);
 
 	HPSB_VERBOSE("CSR: setting expire to %lu, HZ=%u", csr->expire, HZ);
 }