From: Arik Nemtsov Date: Thu, 10 May 2012 09:13:32 +0000 (+0300) Subject: wl18xx: ipmlement ap_rate_mask hw op X-Git-Tag: next-20120724~65^2~554^2~8^2~103 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f13af3484f04f61794d90dbdab28df8bf8b9d667;p=karo-tx-linux.git wl18xx: ipmlement ap_rate_mask hw op Enable wide-chan or MIMO rates when appropriate. Signed-off-by: Arik Nemtsov Signed-off-by: Luciano Coelho --- diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index fd7a803ff98c..77840ddd3129 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -862,6 +862,23 @@ static void wl18xx_set_rx_csum(struct wl1271 *wl, skb->ip_summed = CHECKSUM_UNNECESSARY; } +static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl, + struct wl12xx_vif *wlvif) +{ + u32 hw_rate_set = wlvif->rate_set; + + if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || + wlvif->channel_type == NL80211_CHAN_HT40PLUS) { + wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); + hw_rate_set |= CONF_TX_RATE_USE_WIDE_CHAN; + + /* we don't support MIMO in wide-channel mode */ + hw_rate_set &= ~CONF_TX_MIMO_RATES; + } + + return hw_rate_set; +} + static void wl18xx_conf_init(struct wl1271 *wl) { struct wl18xx_priv *priv = wl->priv; @@ -888,6 +905,7 @@ static struct wlcore_ops wl18xx_ops = { .hw_init = wl18xx_hw_init, .set_tx_desc_csum = wl18xx_set_tx_desc_csum, .set_rx_csum = wl18xx_set_rx_csum, + .sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask, }; int __devinit wl18xx_probe(struct platform_device *pdev) diff --git a/drivers/net/wireless/ti/wl18xx/tx.h b/drivers/net/wireless/ti/wl18xx/tx.h index a91eb10a42f2..2417262de207 100644 --- a/drivers/net/wireless/ti/wl18xx/tx.h +++ b/drivers/net/wireless/ti/wl18xx/tx.h @@ -31,6 +31,12 @@ #define WL18XX_TX_STATUS_DESC_ID_MASK 0x7F #define WL18XX_TX_STATUS_STAT_BIT_IDX 7 +/* + * The FW uses a special bit to indicate a wide channel should be used in + * the rate policy. + */ +#define CONF_TX_RATE_USE_WIDE_CHAN BIT(31) + void wl18xx_tx_immediate_complete(struct wl1271 *wl); #endif /* __WL12XX_TX_H__ */ diff --git a/drivers/net/wireless/ti/wlcore/conf.h b/drivers/net/wireless/ti/wlcore/conf.h index 0798c1e88814..14dd361fa828 100644 --- a/drivers/net/wireless/ti/wlcore/conf.h +++ b/drivers/net/wireless/ti/wlcore/conf.h @@ -443,6 +443,12 @@ struct conf_rx_settings { CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \ CONF_HW_BIT_RATE_MCS_7) +#define CONF_TX_MIMO_RATES (CONF_HW_BIT_RATE_MCS_8 | \ + CONF_HW_BIT_RATE_MCS_9 | CONF_HW_BIT_RATE_MCS_10 | \ + CONF_HW_BIT_RATE_MCS_11 | CONF_HW_BIT_RATE_MCS_12 | \ + CONF_HW_BIT_RATE_MCS_13 | CONF_HW_BIT_RATE_MCS_14 | \ + CONF_HW_BIT_RATE_MCS_15) + /* * Default rates for management traffic when operating in AP mode. This * should be configured according to the basic rate set of the AP