From: Tanmay Upadhyay Date: Mon, 2 May 2011 06:00:00 +0000 (+0530) Subject: ARM: pxa168: Add board support for gplugD X-Git-Tag: next-20110726~87^2~6^2~1^5~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f16e05c7501d6cc5d7c947e8d8ff2f8ac6fa97f4;p=karo-tx-linux.git ARM: pxa168: Add board support for gplugD Tested UART console, Ethernet & I2C interfaces Signed-off-by: Tanmay Upadhyay Signed-off-by: Eric Miao --- diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 67793a690272..56ef5f6c8116 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -77,6 +77,13 @@ config MACH_TETON_BGA Say 'Y' here if you want to support the Marvell PXA168-based Teton BGA Development Board. +config MACH_SHEEVAD + bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + GuruPlug Display (gplugD) Board + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 5c68382141af..b0ac942327aa 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o +obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c new file mode 100644 index 000000000000..c070c24255f4 --- /dev/null +++ b/arch/arm/mach-mmp/gplugd.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-mmp/gplugd.c + * + * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include + +#include +#include + +#include +#include +#include +#include + +#include "common.h" + +static unsigned long gplugd_pin_config[] __initdata = { + /* UART3 */ + GPIO8_UART3_SOUT, + GPIO9_UART3_SIN, + GPI1O_UART3_CTS, + GPI11_UART3_RTS, + + /* MMC2 */ + GPIO28_MMC2_CMD, + GPIO29_MMC2_CLK, + GPIO30_MMC2_DAT0, + GPIO31_MMC2_DAT1, + GPIO32_MMC2_DAT2, + GPIO33_MMC2_DAT3, + + /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */ + GPIO35_GPIO, + GPIO36_GPIO, /* CEC Interrupt */ + + /* MMC1 */ + GPIO43_MMC1_CLK, + GPIO49_MMC1_CMD, + GPIO41_MMC1_DAT0, + GPIO40_MMC1_DAT1, + GPIO52_MMC1_DAT2, + GPIO51_MMC1_DAT3, + GPIO53_MMC1_CD, + + /* LCD */ + GPIO56_LCD_FCLK_RD, + GPIO57_LCD_LCLK_A0, + GPIO58_LCD_PCLK_WR, + GPIO59_LCD_DENA_BIAS, + GPIO60_LCD_DD0, + GPIO61_LCD_DD1, + GPIO62_LCD_DD2, + GPIO63_LCD_DD3, + GPIO64_LCD_DD4, + GPIO65_LCD_DD5, + GPIO66_LCD_DD6, + GPIO67_LCD_DD7, + GPIO68_LCD_DD8, + GPIO69_LCD_DD9, + GPIO70_LCD_DD10, + GPIO71_LCD_DD11, + GPIO72_LCD_DD12, + GPIO73_LCD_DD13, + GPIO74_LCD_DD14, + GPIO75_LCD_DD15, + GPIO76_LCD_DD16, + GPIO77_LCD_DD17, + GPIO78_LCD_DD18, + GPIO79_LCD_DD19, + GPIO80_LCD_DD20, + GPIO81_LCD_DD21, + GPIO82_LCD_DD22, + GPIO83_LCD_DD23, + + /* GPIO */ + GPIO84_GPIO, + GPIO85_GPIO, + + /* Fast-Ethernet*/ + GPIO86_TX_CLK, + GPIO87_TX_EN, + GPIO88_TX_DQ3, + GPIO89_TX_DQ2, + GPIO90_TX_DQ1, + GPIO91_TX_DQ0, + GPIO92_MII_CRS, + GPIO93_MII_COL, + GPIO94_RX_CLK, + GPIO95_RX_ER, + GPIO96_RX_DQ3, + GPIO97_RX_DQ2, + GPIO98_RX_DQ1, + GPIO99_RX_DQ0, + GPIO100_MII_MDC, + GPIO101_MII_MDIO, + GPIO103_RX_DV, + GPIO104_GPIO, /* Reset PHY */ + + /* RTC interrupt */ + GPIO102_GPIO, + + /* I2C */ + GPIO105_CI2C_SDA, + GPIO106_CI2C_SCL, + + /* Select JTAG */ + GPIO109_GPIO, + + /* I2S */ + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_TXD +}; + +static struct i2c_board_info gplugd_i2c_board_info[] = { + { + .type = "isl1208", + .addr = 0x6F, + } +}; + +/* Bring PHY out of reset by setting GPIO 104 */ +static int gplugd_eth_init(void) +{ + if (unlikely(gpio_request(104, "ETH_RESET_N"))) { + printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet " + "PHY out of reset\n"); + return -EIO; + } + + gpio_direction_output(104, 1); + gpio_free(104); + return 0; +} + +struct pxa168_eth_platform_data gplugd_eth_platform_data = { + .port_number = 0, + .phy_addr = 0, + .speed = 0, /* Autonagotiation */ + .init = gplugd_eth_init, +}; + +static void __init select_disp_freq(void) +{ + /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */ + if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) { + printk(KERN_ERR "Can't get hold of GPIO 35 to select display " + "frequency\n"); + } else { + gpio_direction_output(35, 1); + gpio_free(104); + } + + if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { + printk(KERN_ERR "Can't get hold of GPIO 85 to select display " + "frequency\n"); + } else { + gpio_direction_output(85, 0); + gpio_free(104); + } +} + +static void __init gplugd_init(void) +{ + mfp_config(ARRAY_AND_SIZE(gplugd_pin_config)); + + select_disp_freq(); + + /* on-chip devices */ + pxa168_add_uart(3); + pxa168_add_ssp(0); + pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + + pxa168_add_eth(&gplugd_eth_platform_data); +} + +MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform") + .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = gplugd_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/mfp-gplugd.h b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h new file mode 100644 index 000000000000..b8cf38d85600 --- /dev/null +++ b/arch/arm/mach-mmp/include/mach/mfp-gplugd.h @@ -0,0 +1,52 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h + * + * MFP definitions used in gplugD + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_MFP_GPLUGD_H +#define __MACH_MFP_GPLUGD_H + +#include +#include + +/* UART3 */ +#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2) +#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2) + +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* I2S */ +#undef GPIO114_I2S_FRM +#undef GPIO115_I2S_BCLK + +#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST) +#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST) +#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + +/* OTG GPIO */ +#define GPIO_USB_OTG_PEN 18 +#define GPIO_USB_OIDIR 20 + +/* Other GPIOs are 35, 84, 85 */ +#endif /* __MACH_MFP_GPLUGD_H */