From: Will Drewry Date: Wed, 3 Aug 2011 23:21:08 +0000 (-0700) Subject: Documentation: add pointer to name_to_dev_t for root= values X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f2d34fd9435c7e60cb5189d036efe9abfc911862;p=linux-beck.git Documentation: add pointer to name_to_dev_t for root= values Update kernel-parameters.txt to point users to the authoritative comment for name_to_dev_t. In addition, updates other places where some name_to_dev_t behavior was discussed. All other references to root= appear to be for explicit sample usage or just side comments when discussing other kernel parameters. Signed-off-by: Will Drewry Cc: Kay Sievers Cc: Randy Dunlap Cc: Namhyung Kim Cc: Trond Myklebust Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/frv/booting.txt b/Documentation/frv/booting.txt index ace200b7c214..37c4d84a0e57 100644 --- a/Documentation/frv/booting.txt +++ b/Documentation/frv/booting.txt @@ -106,13 +106,20 @@ separated by spaces: To use the first on-chip serial port at baud rate 115200, no parity, 8 bits, and no flow control. - (*) root=/dev/ + (*) root= - This specifies the device upon which the root filesystem resides. For - example: + This specifies the device upon which the root filesystem resides. It + may be specified by major and minor number, device path, or even + partition uuid, if supported. For example: /dev/nfs NFS root filesystem /dev/mtdblock3 Fourth RedBoot partition on the System Flash + PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=1 + first partition after the partition with the given UUID + 253:0 Device with major 253 and minor 0 + + Authoritative information can be found in + "Documentation/kernel-parameters.txt". (*) rw diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d57f00d1bb25..865e39f1850c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2245,6 +2245,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ro [KNL] Mount root device read-only on boot root= [KNL] Root filesystem + See name_to_dev_t comment in init/do_mounts.c. rootdelay= [KNL] Delay (in seconds) to pause before attempting to mount the root filesystem diff --git a/Documentation/m68k/kernel-options.txt b/Documentation/m68k/kernel-options.txt index c93bed66e25d..97d45f276fe6 100644 --- a/Documentation/m68k/kernel-options.txt +++ b/Documentation/m68k/kernel-options.txt @@ -129,6 +129,20 @@ decimal 11 is the major of SCSI CD-ROMs, and the minor 0 stands for the first of these. You can find out all valid major numbers by looking into include/linux/major.h. +In addition to major and minor numbers, if the device containing your +root partition uses a partition table format with unique partition +identifiers, then you may use them. For instance, +"root=PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF". It is also +possible to reference another partition on the same device using a +known partition UUID as the starting point. For example, +if partition 5 of the device has the UUID of +00112233-4455-6677-8899-AABBCCDDEEFF then partition 3 may be found as +follows: + PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=-2 + +Authoritative information can be found in +"Documentation/kernel-parameters.txt". + 2.2) ro, rw -----------