From: Stefan Roese <sr@denx.de>
Date: Fri, 16 Nov 2007 13:16:54 +0000 (+0100)
Subject: ppc4xx: Enable 405EX PCIe UTL register configuration
X-Git-Tag: v1.3.2-rc1~102^2~72
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03;p=karo-tx-uboot.git

ppc4xx: Enable 405EX PCIe UTL register configuration

Till now the UTL registers on 405EX were not initialized but left with
their default values. This patch new initializes some of the UTL
registers on 405EX.

Signed-off-by: Stefan Roese <sr@denx.de>
---

diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index de7955280e..cafd933890 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -401,6 +401,48 @@ int ppc4xx_init_pcie(void)
 	return 0;
 }
 #else
+static void ppc4xx_setup_utl(u32 port)
+{
+	u32 utl_base;
+
+	/*
+	 * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CFG_PCIE0_UTLBASE);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0xfffffc01); /* 4k region, valid */
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CFG_PCIE1_UTLBASE);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0xfffffc01); /* 4k region, valid */
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
+
+		break;
+	}
+	utl_base = (port==0) ? CFG_PCIE0_UTLBASE : CFG_PCIE1_UTLBASE;
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32((u32 *)(utl_base + PEUTL_OUTTR),   0x02000000);
+	out_be32((u32 *)(utl_base + PEUTL_INTR),    0x02000000);
+	out_be32((u32 *)(utl_base + PEUTL_OPDBSZ),  0x04000000);
+	out_be32((u32 *)(utl_base + PEUTL_PBBSZ),   0x21000000);
+	out_be32((u32 *)(utl_base + PEUTL_IPHBSZ),  0x02000000);
+	out_be32((u32 *)(utl_base + PEUTL_IPDBSZ),  0x04000000);
+	out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
+	out_be32((u32 *)(utl_base + PEUTL_PCTL),    0x80800066);
+
+	out_be32((u32 *)(utl_base + PEUTL_PBCTL),   0x0800000c);
+	out_be32((u32 *)(utl_base + PEUTL_RCSTA),
+		 in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
+}
+
 int ppc4xx_init_pcie(void)
 {
 	/*
@@ -643,14 +685,12 @@ int ppc4xx_init_pcie_port(int port, int rootport)
 		return -1;
 	}
 
-#if defined(CONFIG_440SPE)
 	/*
 	 * Setup UTL registers - but only on revA!
 	 * We use default settings for revB chip.
 	 */
 	if (!ppc440spe_revB())
 		ppc4xx_setup_utl(port);
-#endif
 
 	/*
 	 * We map PCI Express configuration access into the 512MB regions
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index d376f52a60..9e9c685afe 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -510,7 +510,6 @@ int checkcpu (void)
 	return 0;
 }
 
-#if defined (CONFIG_440SPE)
 int ppc440spe_revB() {
 	unsigned int pvr;
 
@@ -520,7 +519,6 @@ int ppc440spe_revB() {
 	else
 		return 0;
 }
-#endif
 
 /* ------------------------------------------------------------------------- */
 
diff --git a/include/asm-ppc/4xx_pcie.h b/include/asm-ppc/4xx_pcie.h
index ffe07706a3..4c03b050fe 100644
--- a/include/asm-ppc/4xx_pcie.h
+++ b/include/asm-ppc/4xx_pcie.h
@@ -203,6 +203,7 @@
 /*
  * UTL register offsets
  */
+#define	PEUTL_PBCTL		0x00
 #define PEUTL_PBBSZ		0x20
 #define PEUTL_OPDBSZ		0x68
 #define PEUTL_IPHBSZ		0x70
@@ -210,6 +211,7 @@
 #define PEUTL_OUTTR		0x90
 #define PEUTL_INTR		0x98
 #define PEUTL_PCTL		0xa0
+#define	PEUTL_RCSTA		0xb0
 #define PEUTL_RCIRQEN		0xb8
 
 /*
diff --git a/include/common.h b/include/common.h
index 46ed6bd97b..77aed1a318 100644
--- a/include/common.h
+++ b/include/common.h
@@ -516,10 +516,10 @@ void   get_sys_info  ( sys_info_t * );
 #	if defined(CONFIG_440SPE)
 	 unsigned long determine_sysper(void);
 	 unsigned long determine_pci_clock_per(void);
-	 int ppc440spe_revB(void);
 #	endif
 #  endif
 typedef PPC4xx_SYS_INFO sys_info_t;
+int	ppc440spe_revB(void);
 void	get_sys_info  ( sys_info_t * );
 #endif