From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 20 Feb 2015 00:31:57 +0000 (+0100)
Subject: ARM: dts: rockchip: enable gmac on rk3288-firefly
X-Git-Tag: v4.1-rc1~50^2~34^2~4
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f36abc869886ac91f88c72d21835497686228558;p=karo-tx-linux.git

ARM: dts: rockchip: enable gmac on rk3288-firefly

This was left out of the original firefly board definition due to the
ethernet support going completely through the network tree, making the
underlying nodes unavailable.

Now that everything is present enable the gmac on the firefly.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index b9dda411e569..b54dd78580c1 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -179,6 +179,22 @@
 	status = "okay";
 };
 
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
 	status = "okay";