From: Johan Hovold <jhovold@gmail.com>
Date: Mon, 14 Jan 2013 15:52:58 +0000 (+0100)
Subject: USB: io_ti: kill custom closing_wait implementation
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f40d781554ef5413d70254e422bc59d6538333d2;p=linux-beck.git

USB: io_ti: kill custom closing_wait implementation

Kill custom closing_wait implementation and let the tty layer handle it
instead.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 590f27d3bfc1..641ab3da2d83 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -521,47 +521,6 @@ exit_is_tx_active:
 	return bytes_left;
 }
 
-static void chase_port(struct edgeport_port *port, unsigned long timeout)
-{
-	struct tty_struct *tty = tty_port_tty_get(&port->port->port);
-	struct usb_serial *serial = port->port->serial;
-	wait_queue_t wait;
-	unsigned long flags;
-
-	if (!timeout)
-		timeout = (HZ * EDGE_CLOSING_WAIT)/100;
-
-	/* wait for data to drain from the buffer */
-	spin_lock_irqsave(&port->ep_lock, flags);
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&tty->write_wait, &wait);
-	for (;;) {
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (kfifo_len(&port->write_fifo) == 0
-		|| timeout == 0 || signal_pending(current)
-		|| serial->disconnected)
-			/* disconnect */
-			break;
-		spin_unlock_irqrestore(&port->ep_lock, flags);
-		timeout = schedule_timeout(timeout);
-		spin_lock_irqsave(&port->ep_lock, flags);
-	}
-	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&tty->write_wait, &wait);
-	spin_unlock_irqrestore(&port->ep_lock, flags);
-	tty_kref_put(tty);
-
-	/* wait for data to drain from the device */
-	timeout += jiffies;
-	while ((long)(jiffies - timeout) < 0 && !signal_pending(current)
-						&& !serial->disconnected) {
-		/* not disconnected */
-		if (!tx_active(port))
-			break;
-		msleep(10);
-	}
-}
-
 static int choose_config(struct usb_device *dev)
 {
 	/*
@@ -1955,8 +1914,6 @@ static void edge_close(struct usb_serial_port *port)
 	 * this flag and dump add read data */
 	edge_port->close_pending = 1;
 
-	chase_port(edge_port, (HZ * closing_wait) / 100);
-
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->write_urb);
 	edge_port->ep_write_urb_in_use = 0;
@@ -2092,8 +2049,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty)
 
 	if (edge_port == NULL)
 		return 0;
-	if (edge_port->close_pending == 1)
-		return 0;
 
 	spin_lock_irqsave(&edge_port->ep_lock, flags);
 	chars = kfifo_len(&edge_port->write_fifo);
@@ -2442,10 +2397,15 @@ static int get_serial_info(struct edgeport_port *edge_port,
 				struct serial_struct __user *retinfo)
 {
 	struct serial_struct tmp;
+	unsigned cwait;
 
 	if (!retinfo)
 		return -EFAULT;
 
+	cwait = edge_port->port->port.closing_wait;
+	if (cwait != ASYNC_CLOSING_WAIT_NONE)
+		cwait = jiffies_to_msecs(closing_wait) / 10;
+
 	memset(&tmp, 0, sizeof(tmp));
 
 	tmp.type		= PORT_16550A;
@@ -2456,7 +2416,7 @@ static int get_serial_info(struct edgeport_port *edge_port,
 	tmp.xmit_fifo_size	= edge_port->port->bulk_out_size;
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
-	tmp.closing_wait	= closing_wait;
+	tmp.closing_wait	= cwait;
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -2511,8 +2471,7 @@ static void edge_break(struct tty_struct *tty, int break_state)
 	int status;
 	int bv = 0;	/* Off */
 
-	/* chase the port close */
-	chase_port(edge_port, 0);
+	tty_wait_until_sent(tty, 0);
 
 	if (break_state == -1)
 		bv = 1;	/* On */
@@ -2585,6 +2544,8 @@ static int edge_port_probe(struct usb_serial_port *port)
 		return ret;
 	}
 
+	port->port.closing_wait = msecs_to_jiffies(closing_wait * 10);
+
 	return 0;
 }