From: wangweidong Date: Thu, 14 Apr 2016 07:43:52 +0000 (+0800) Subject: phy: make some bits preserved while setup forced mode X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f48256efededaa87f475c0d6330d83f853cb064a;p=linux-beck.git phy: make some bits preserved while setup forced mode When tested the PHY SGMII Loopback: 1.set the LOOPBACK bit, 2.set the autoneg to AUTONEG_DISABLE, it calls the genphy_setup_forced which will clear the bit. The BMCR_LOOPBACK bit should be preserved. As Florian pointed out that other bits should be preserved too. So I make the BMCR_ISOLATE and BMCR_PDOWN as well. Signed-off-by: Weidong Wang Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e551f3a89cfd..10e39c2fbf81 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1123,8 +1123,9 @@ static int genphy_config_advert(struct phy_device *phydev) */ int genphy_setup_forced(struct phy_device *phydev) { - int ctl = 0; + int ctl = phy_read(phydev, MII_BMCR); + ctl &= BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN; phydev->pause = 0; phydev->asym_pause = 0;