From: Georgi Djakov <georgi.djakov@linaro.org>
Date: Thu, 3 Dec 2015 14:02:52 +0000 (+0200)
Subject: arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators
X-Git-Tag: v4.5-rc1~42^2~6^2~5
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f4fb6aeafaaa1c795f4ada9388051295830460c7;p=karo-tx-linux.git

arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators

Currently the rates of the xo and sleep clocks are hard-coded in the
GCC driver, but this is a board layout description that actually should
be in the DT. Moving them into DT also allows us to insert the RPM
controlled clocks between the DT and GCC clocks.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
---

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 82881948aaeb..f9844097640d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -74,6 +74,20 @@
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;