From: Vivien Didelot Date: Wed, 19 Aug 2015 22:54:55 +0000 (-0400) Subject: net: dsa: mv88e6xxx: set 802.1Q mode to Fallback X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f5117ce4f6a16fa2a02ceff9c337cfffca8b75f2;p=linux-beck.git net: dsa: mv88e6xxx: set 802.1Q mode to Fallback The current Secure port mode requires the port-based VLANs to also be valid in the 802.1Q VLAN Table Unit. The current hardware bridging support only configures the port-based VLANs, thus is broken. A new patchset is required to adapt the hardware bridging code to fully support the Secure port mode. In the meantime, change the 802.1Q mode of every ports to Fallback, which filtering is more permissive, and doesn't add this restriction to handle port-based and tagged-based VLANs. Fixes: 8efdda4a1b60 ("net: dsa: mv88e6xxx: use port 802.1Q mode Secure") Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index 2ab3f9810593..3774f53d28d7 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -2033,7 +2033,7 @@ static int mv88e6xxx_setup_port(struct dsa_switch *ds, int port) reg |= PORT_CONTROL_2_FORWARD_UNKNOWN; } - reg |= PORT_CONTROL_2_8021Q_SECURE; + reg |= PORT_CONTROL_2_8021Q_FALLBACK; if (reg) { ret = _mv88e6xxx_reg_write(ds, REG_PORT(port),