From: David Gibson Date: Wed, 18 Apr 2007 06:36:26 +0000 (+1000) Subject: [POWERPC] Re-organize Kconfig code for 4xx in arch/powerpc X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f65573314e4e2d7deacd7ed101c004148e156296;p=linux-beck.git [POWERPC] Re-organize Kconfig code for 4xx in arch/powerpc Now that we always take a device tree in arch/powerpc, there's no good reason not to allow a single kernel to support multiple embedded 4xx boards - the correct platform code can be selected based on the device tree information. Therefore, this patch re-arranges the 4xx Kconfig code to allow this. In addition we: - use "select" instead of depends to configure the correct config options for specific 4xx CPUs and workarounds, which makes the information about specific boards and CPUs less scattered. - Some old, unused (in arch/powerpc) config options are removed: WANT_EARLY_SERIAL, IBM_OCP, etc. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras --- diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig index 2f2a13ed7667..ded357c17414 100644 --- a/arch/powerpc/platforms/4xx/Kconfig +++ b/arch/powerpc/platforms/4xx/Kconfig @@ -3,278 +3,206 @@ config 4xx depends on 40x || 44x default y -config WANT_EARLY_SERIAL +config BOOKE bool - select SERIAL_8250 - default n - -menu "AMCC 4xx options" - depends on 4xx - -choice - prompt "Machine Type" - depends on 40x - default WALNUT - -config BUBINGA - bool "Bubinga" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM 405EP evaluation board. - -config CPCI405 - bool "CPCI405" - help - This option enables support for the CPCI405 board. - -config EP405 - bool "EP405/EP405PC" - help - This option enables support for the EP405/EP405PC boards. - -config REDWOOD_5 - bool "Redwood-5" - help - This option enables support for the IBM STB04 evaluation board. - -config REDWOOD_6 - bool "Redwood-6" - help - This option enables support for the IBM STBx25xx evaluation board. - -config SYCAMORE - bool "Sycamore" - help - This option enables support for the IBM PPC405GPr evaluation board. - -config WALNUT - bool "Walnut" - help - This option enables support for the IBM PPC405GP evaluation board. - -config XILINX_ML300 - bool "Xilinx-ML300" - help - This option enables support for the Xilinx ML300 evaluation board. - -endchoice - -choice - prompt "Machine Type" depends on 44x - default EBONY - -config BAMBOO - bool "Bamboo" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440EP evaluation board. - -config EBONY - bool "Ebony" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440GP evaluation board. - -config LUAN - bool "Luan" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440SP evaluation board. - -config OCOTEA - bool "Ocotea" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440GX evaluation board. + default y -endchoice +menu "AMCC 40x options" + depends on 40x -config EP405PC - bool "EP405PC Support" - depends on EP405 +#config BUBINGA +# bool "Bubinga" +# depends on 40x +# default n +# select 405EP +# help +# This option enables support for the IBM 405EP evaluation board. + +#config CPCI405 +# bool "CPCI405" +# depends on 40x +# default n +# select 405GP +# help +# This option enables support for the CPCI405 board. + +#config EP405 +# bool "EP405/EP405PC" +# depends on 40x +# default n +# select 405GP +# help +# This option enables support for the EP405/EP405PC boards. + +#config EP405PC +# bool "EP405PC Support" +# depends on EP405 +# default y +# help +# This option enables support for the extra features of the EP405PC board. + +#config REDWOOD_5 +# bool "Redwood-5" +# depends on 40x +# default n +# select STB03xxx +# help +# This option enables support for the IBM STB04 evaluation board. + +#config REDWOOD_6 +# bool "Redwood-6" +# depends on 40x +# default n +# select STB03xxx +# help +# This option enables support for the IBM STBx25xx evaluation board. + +#config SYCAMORE +# bool "Sycamore" +# depends on 40x +# default n +# select 405GPR +# help +# This option enables support for the IBM PPC405GPr evaluation board. + +#config WALNUT +# bool "Walnut" +# depends on 40x +# default y +# select 405GP +# help +# This option enables support for the IBM PPC405GP evaluation board. + +#config XILINX_ML300 +# bool "Xilinx-ML300" +# depends on 40x +# default y +# select VIRTEX_II_PRO +# help +# This option enables support for the Xilinx ML300 evaluation board. +endmenu -# It's often necessary to know the specific 4xx processor type. -# Fortunately, it is impled (so far) from the board type, so we -# don't need to ask more redundant questions. +# 40x specific CPU modules, selected based on the board above. config NP405H bool - depends on ASH - default y + #depends on ASH -config 440EP +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards +config 403GCX bool - depends on BAMBOO - select PPC_FPU - default y + #depends on OAK + select IBM405_ERR51 -config 440GP +config 405GP bool - depends on EBONY - default y + select IBM405_ERR77 + select IBM405_ERR51 -config 440GX +config 405EP bool - depends on OCOTEA - default y -config 440SP +config 405GPR bool - depends on LUAN - default y -config 440 +config VIRTEX_II_PRO bool - depends on 440GP || 440SP || 440EP - default y + select IBM405_ERR77 + select IBM405_ERR51 -config 440A +config STB03xxx bool - depends on 440GX - default y + select IBM405_ERR77 + select IBM405_ERR51 -config IBM440EP_ERR42 - bool - depends on 440EP - default y +# 40x errata/workaround config symbols, selected by the CPU models above # All 405-based cores up until the 405GPR and 405EP have this errata. config IBM405_ERR77 bool - depends on 40x && !403GCX && !405GPR && !405EP - default y # All 40x-based cores, up until the 405GPR and 405EP have this errata. config IBM405_ERR51 bool - depends on 40x && !405GPR && !405EP - default y -config BOOKE - bool +menu "AMCC 44x options" depends on 44x - default y - -config IBM_OCP - bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT - default y -config XILINX_OCP - bool - depends on XILINX_ML300 - default y +#config BAMBOO +# bool "Bamboo" +# depends on 44x +# default n +# select 440EP +# help +# This option enables support for the IBM PPC440EP evaluation board. -config IBM_EMAC4 - bool - depends on 440GX || 440SP - default y - -config BIOS_FIXUP - bool - depends on BUBINGA || EP405 || SYCAMORE || WALNUT - default y - -# OAK doesn't exist but wanted to keep this around for any future 403GCX boards -config 403GCX - bool - depends on OAK - default y - -config 405EP - bool - depends on BUBINGA - default y - -config 405GP - bool - depends on CPCI405 || EP405 || WALNUT - default y - -config 405GPR - bool - depends on SYCAMORE +config EBONY + bool "Ebony" + depends on 44x default y + select 440GP + help + This option enables support for the IBM PPC440GP evaluation board. -config VIRTEX_II_PRO - bool - depends on XILINX_ML300 - default y +#config LUAN +# bool "Luan" +# depends on 44x +# default n +# select 440SP +# help +# This option enables support for the IBM PPC440SP evaluation board. + +#config OCOTEA +# bool "Ocotea" +# depends on 44x +# default n +# select 440GX +# help +# This option enables support for the IBM PPC440GX evaluation board. -config STB03xxx - bool - depends on REDWOOD_5 || REDWOOD_6 - default y +endmenu -config EMBEDDEDBOOT +# 44x specific CPU modules, selected based on the board above. +config 440EP bool - depends on EP405 || XILINX_ML300 - default y + select PPC_FPU + select IBM440EP_ERR42 -config IBM_OPENBIOS +config 440GP bool - depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT - default y + select IBM_NEW_EMAC_ZMII -config PPC4xx_DMA - bool "PPC4xx DMA controller support" - depends on 4xx - -config PPC4xx_EDMA +config 440GX bool - depends on !STB03xxx && PPC4xx_DMA - default y -config PPC_GEN550 +config 440SP bool - depends on 4xx - default y - -choice - prompt "TTYS0 device and default console" - depends on 40x - default UART0_TTYS0 - -config UART0_TTYS0 - bool "UART0" -config UART0_TTYS1 - bool "UART1" - -endchoice - -config SERIAL_SICC - bool "SICC Serial port support" - depends on STB03xxx - -config UART1_DFLT_CONSOLE +config 440A bool - depends on SERIAL_SICC && UART0_TTYS1 + depends on 440GX default y -config SERIAL_SICC_CONSOLE +# 44x errata/workaround config symbols, selected by the CPU models above +config IBM440EP_ERR42 bool - depends on SERIAL_SICC && UART0_TTYS1 - default y -endmenu +#config XILINX_OCP +# bool +# depends on XILINX_ML300 +# default y -menu "IBM 40x options" - depends on 40x - -config SERIAL_SICC - bool "SICC Serial port" - depends on STB03xxx - -config UART1_DFLT_CONSOLE - bool - depends on SERIAL_SICC && UART0_TTYS1 - default y +#config BIOS_FIXUP +# bool +# depends on BUBINGA || EP405 || SYCAMORE || WALNUT +# default y -config SERIAL_SICC_CONSOLE - bool - depends on SERIAL_SICC && UART0_TTYS1 - default y +#config PPC4xx_DMA +# bool "PPC4xx DMA controller support" +# depends on 4xx -endmenu +#config PPC4xx_EDMA +# bool +# depends on !STB03xxx && PPC4xx_DMA +# default y