From: Vaibhav Bedia <vaibhav.bedia@ti.com>
Date: Tue, 29 Jan 2013 11:15:07 +0000 (+0530)
Subject: ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f6575c90f6fc637697f130ea4a05892296c9a473;p=linux-beck.git

ARM: DTS: AM33XX: Add nodes for OCMC RAM and WKUP-M3

Since AM33XX supports only DT-boot, this is needed
for the appropriate device nodes to be created.

Note: OCMC RAM is part of the PER power domain and supports
retention. The assembly code for low power entry/exit will
run from OCMC RAM. To ensure that the OMAP PM code does not
attempt to disable the clock to OCMC RAM as part of the
suspend process add the no_idle_on_suspend flag.

Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index c2f14e875eb6..0957645b73af 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -385,5 +385,19 @@
 				mac-address = [ 00 00 00 00 00 00 ];
 			};
 		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "ti,am3352-ocmcram";
+			reg = <0x40300000 0x10000>;
+			ti,hwmods = "ocmcram";
+			ti,no_idle_on_suspend;
+		};
+
+		wkup_m3: wkup_m3@44d00000 {
+			compatible = "ti,am3353-wkup-m3";
+			reg = <0x44d00000 0x4000	/* M3 UMEM */
+			       0x44d80000 0x2000>;	/* M3 DMEM */
+			ti,hwmods = "wkup_m3";
+		};
 	};
 };