From: Dan Williams Date: Sat, 24 Jan 2009 14:10:42 +0000 (-0500) Subject: airo: re-arrange WPA capability checks X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f65b56d67b48eec7ffe174f223e98db58c3bf2b5;p=linux-beck.git airo: re-arrange WPA capability checks The capability register has to be read for other (upcoming) stuff, so fold the WPA test function back into _init_airo_card() and move the netdevice registration stuff above it so that the netdevice has a name by the time the card's capabilities are printed out. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index a192c4472e02..a08aadfa09ac 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2734,28 +2734,6 @@ static void airo_networks_initialize(struct airo_info *ai) &ai->network_free_list); } -static int airo_test_wpa_capable(struct airo_info *ai) -{ - int status; - CapabilityRid cap_rid; - - status = readCapabilityRid(ai, &cap_rid, 1); - if (status != SUCCESS) return 0; - - /* Only firmware versions 5.30.17 or better can do WPA */ - if (le16_to_cpu(cap_rid.softVer) > 0x530 - || (le16_to_cpu(cap_rid.softVer) == 0x530 - && le16_to_cpu(cap_rid.softSubVer) >= 17)) { - airo_print_info("", "WPA is supported."); - return 1; - } - - /* No WPA support */ - airo_print_info("", "WPA unsupported (only firmware versions 5.30.17" - " and greater support WPA. Detected %s)", cap_rid.prodVer); - return 0; -} - static struct net_device *_init_airo_card( unsigned short irq, int port, int is_pcmcia, struct pci_dev *pci, struct device *dmdev ) @@ -2763,6 +2741,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, struct net_device *dev; struct airo_info *ai; int i, rc; + CapabilityRid cap_rid; /* Create the network device object. */ dev = alloc_netdev(sizeof(*ai), "", ether_setup); @@ -2832,7 +2811,7 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, } if (probe) { - if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) { + if (setup_card(ai, dev->dev_addr, 1) != SUCCESS) { airo_print_err(dev->name, "MAC could not be enabled" ); rc = -EIO; goto err_out_map; @@ -2842,28 +2821,47 @@ static struct net_device *_init_airo_card( unsigned short irq, int port, set_bit(FLAG_FLASHING, &ai->flags); } + strcpy(dev->name, "eth%d"); + rc = register_netdev(dev); + if (rc) { + airo_print_err(dev->name, "Couldn't register_netdev"); + goto err_out_map; + } + ai->wifidev = init_wifidev(ai, dev); + if (!ai->wifidev) + goto err_out_reg; + + rc = readCapabilityRid(ai, &cap_rid, 1); + if (rc != SUCCESS) { + rc = -EIO; + goto err_out_wifi; + } + + airo_print_info(dev->name, "Firmware version %x.%x.%02x", + ((le16_to_cpu(cap_rid.softVer) >> 8) & 0xF), + (le16_to_cpu(cap_rid.softVer) & 0xFF), + le16_to_cpu(cap_rid.softSubVer)); + /* Test for WPA support */ - if (airo_test_wpa_capable(ai)) { + /* Only firmware versions 5.30.17 or better can do WPA */ + if (le16_to_cpu(cap_rid.softVer) > 0x530 + || (le16_to_cpu(cap_rid.softVer) == 0x530 + && le16_to_cpu(cap_rid.softSubVer) >= 17)) { + airo_print_info(ai->dev->name, "WPA supported."); + set_bit(FLAG_WPA_CAPABLE, &ai->flags); ai->bssListFirst = RID_WPA_BSSLISTFIRST; ai->bssListNext = RID_WPA_BSSLISTNEXT; ai->bssListRidLen = sizeof(BSSListRid); } else { + airo_print_info(ai->dev->name, "WPA unsupported with firmware " + "versions older than 5.30.17."); + ai->bssListFirst = RID_BSSLISTFIRST; ai->bssListNext = RID_BSSLISTNEXT; ai->bssListRidLen = sizeof(BSSListRid) - sizeof(BSSListRidExtra); } - strcpy(dev->name, "eth%d"); - rc = register_netdev(dev); - if (rc) { - airo_print_err(dev->name, "Couldn't register_netdev"); - goto err_out_map; - } - ai->wifidev = init_wifidev(ai, dev); - if (!ai->wifidev) - goto err_out_reg; - set_bit(FLAG_REGISTERED,&ai->flags); airo_print_info(dev->name, "MAC enabled %pM", dev->dev_addr);