From: Mark Einon Date: Tue, 30 Aug 2011 11:47:23 +0000 (+0100) Subject: staging: et131x: Remove xcvr_addr and et131x_xcvr_find X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f660732fdcf2b7eaf3ebfd9f7b6bc921837536f5;p=linux-beck.git staging: et131x: Remove xcvr_addr and et131x_xcvr_find Use the phy_device equivalents instead. Signed-off-by: Mark Einon Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 5e21a180af98..961384610d63 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -114,7 +114,6 @@ int et131x_mdio_write(struct mii_bus *bus, int phy_addr, int reg, u16 value) struct net_device *netdev = bus->priv; struct et131x_adapter *adapter = netdev_priv(netdev); - /* mii_write always uses the same phy_addr, xcvr_addr */ return et131x_mii_write(adapter, reg, value); } @@ -128,17 +127,28 @@ int et131x_mdio_reset(struct mii_bus *bus) return 0; } + +int et131x_mii_read(struct et131x_adapter *adapter, u8 reg, u16 *value) +{ + struct phy_device *phydev = adapter->phydev; + + if(!phydev) + return -EIO; + + return et131x_phy_mii_read(adapter, phydev->addr, reg, value); +} + /** * et131x_phy_mii_read - Read from the PHY through the MII Interface on the MAC * @adapter: pointer to our private adapter structure - * @xcvr_addr: the address of the transceiver - * @xcvr_reg: the register to read + * @addr: the address of the transceiver + * @reg: the register to read * @value: pointer to a 16-bit value in which the value will be stored * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr, - u8 xcvr_reg, u16 *value) +int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, + u8 reg, u16 *value) { struct mac_regs __iomem *mac = &adapter->regs->mac; int status = 0; @@ -157,7 +167,7 @@ int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr, writel(0, &mac->mii_mgmt_cmd); /* Set up the register we need to read from on the correct PHY */ - writel(MII_ADDR(xcvr_addr, xcvr_reg), &mac->mii_mgmt_addr); + writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr); writel(0x1, &mac->mii_mgmt_cmd); @@ -170,7 +180,7 @@ int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr, /* If we hit the max delay, we could not read the register */ if (delay == 50) { dev_warn(&adapter->pdev->dev, - "xcvrReg 0x%08x could not be read\n", xcvr_reg); + "reg 0x%08x could not be read\n", reg); dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", mii_indicator); @@ -196,23 +206,29 @@ int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvr_addr, /** * et131x_mii_write - Write to a PHY register through the MII interface of the MAC * @adapter: pointer to our private adapter structure - * @xcvr_reg: the register to read + * @reg: the register to read * @value: 16-bit value to write * * FIXME: one caller in netdev still * * Return 0 on success, errno on failure (as defined in errno.h) */ -int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value) +int et131x_mii_write(struct et131x_adapter *adapter, u8 reg, u16 value) { struct mac_regs __iomem *mac = &adapter->regs->mac; + struct phy_device *phydev = adapter->phydev; int status = 0; - u8 xcvr_addr = adapter->stats.xcvr_addr; + u8 addr; u32 delay = 0; u32 mii_addr; u32 mii_cmd; u32 mii_indicator; + if(!phydev) + return -EIO; + + addr = phydev->addr; + /* Save a local copy of the registers we are dealing with so we can * set them back */ @@ -223,7 +239,7 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value) writel(0, &mac->mii_mgmt_cmd); /* Set up the register we need to write to on the correct PHY */ - writel(MII_ADDR(xcvr_addr, xcvr_reg), &mac->mii_mgmt_addr); + writel(MII_ADDR(addr, reg), &mac->mii_mgmt_addr); /* Add the value to write to the registers to the mac */ writel(value, &mac->mii_mgmt_ctrl); @@ -239,13 +255,13 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value) u16 tmp; dev_warn(&adapter->pdev->dev, - "xcvrReg 0x%08x could not be written", xcvr_reg); + "reg 0x%08x could not be written", reg); dev_warn(&adapter->pdev->dev, "status is 0x%08x\n", mii_indicator); dev_warn(&adapter->pdev->dev, "command is 0x%08x\n", readl(&mac->mii_mgmt_cmd)); - et131x_mii_read(adapter, xcvr_reg, &tmp); + et131x_mii_read(adapter, reg, &tmp); status = -EIO; } @@ -262,36 +278,6 @@ int et131x_mii_write(struct et131x_adapter *adapter, u8 xcvr_reg, u16 value) return status; } -/** - * et131x_xcvr_find - Find the PHY ID - * @adapter: pointer to our private adapter structure - * - * Returns 0 on success, errno on failure (as defined in errno.h) - */ -int et131x_xcvr_find(struct et131x_adapter *adapter) -{ - u8 xcvr_addr; - u16 idr1; - u16 idr2; - - /* We need to get xcvr id and address we just get the first one */ - for (xcvr_addr = 0; xcvr_addr < 32; xcvr_addr++) { - /* Read the ID from the PHY */ - et131x_phy_mii_read(adapter, xcvr_addr, - (u8) offsetof(struct mi_regs, idr1), - &idr1); - et131x_phy_mii_read(adapter, xcvr_addr, - (u8) offsetof(struct mi_regs, idr2), - &idr2); - - if (idr1 != 0 && idr1 != 0xffff) { - adapter->stats.xcvr_addr = xcvr_addr; - return 0; - } - } - return -ENODEV; -} - void et1310_phy_reset(struct et131x_adapter *adapter) { et131x_mii_write(adapter, PHY_CONTROL, 0x8000); diff --git a/drivers/staging/et131x/et131x.h b/drivers/staging/et131x/et131x.h index 9dee7bce073d..763396a9a597 100644 --- a/drivers/staging/et131x/et131x.h +++ b/drivers/staging/et131x/et131x.h @@ -59,7 +59,7 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter, u64 *phys_addr, u64 *offset, u64 mask); -int et131x_adapter_setup(struct et131x_adapter *adapter); +void et131x_adapter_setup(struct et131x_adapter *adapter); int et131x_adapter_memory_alloc(struct et131x_adapter *adapter); void et131x_adapter_memory_free(struct et131x_adapter *adapter); void et131x_hwaddr_init(struct et131x_adapter *adapter); @@ -104,16 +104,13 @@ void et131x_setphy_normal(struct et131x_adapter *adapter); /* static inline function does not work because et131x_adapter is not always * defined */ -int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 xcvrAddr, - u8 xcvrReg, u16 *value); -#define et131x_mii_read(adapter, xcvrReg, value) \ - et131x_phy_mii_read((adapter), \ - (adapter)->stats.xcvr_addr, \ - (xcvrReg), (value)) - +int et131x_phy_mii_read(struct et131x_adapter *adapter, u8 addr, + u8 reg, u16 *value); +int32_t et131x_mii_read(struct et131x_adapter *adapter, + u8 reg, u16 *value); int32_t et131x_mii_write(struct et131x_adapter *adapter, - u8 xcvReg, u16 value); -void et131x_mii_check(struct et131x_adapter *pAdapter, + u8 reg, u16 value); +void et131x_mii_check(struct et131x_adapter *adapter, u16 bmsr, u16 bmsr_ints); int et131x_mdio_read(struct mii_bus *bus, int phy_addr, int reg); diff --git a/drivers/staging/et131x/et131x_adapter.h b/drivers/staging/et131x/et131x_adapter.h index dbb14fed2dd4..fbefd2e88d86 100644 --- a/drivers/staging/et131x/et131x_adapter.h +++ b/drivers/staging/et131x/et131x_adapter.h @@ -113,9 +113,6 @@ struct ce_stats { atomic_t broadcast_pkts_xmtd; u32 rcvd_pkts_dropped; - /* Transceiver state informations. */ - u8 xcvr_addr; - /* Tx Statistics. */ u32 tx_underflows; diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index fbbef7627bca..66cf1ce296e0 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -328,10 +328,8 @@ void et131x_configure_global_regs(struct et131x_adapter *adapter) * * Returns 0 on success, errno on failure (as defined in errno.h) */ -int et131x_adapter_setup(struct et131x_adapter *adapter) +void et131x_adapter_setup(struct et131x_adapter *adapter) { - int status; - /* Configure the JAGCore */ et131x_configure_global_regs(adapter); @@ -349,12 +347,6 @@ int et131x_adapter_setup(struct et131x_adapter *adapter) et1310_config_macstat_regs(adapter); - /* Move the following code to Timer function?? */ - status = et131x_xcvr_find(adapter); - - if (status) - dev_warn(&adapter->pdev->dev, "Could not find the xcvr\n"); - /* Prepare the TRUEPHY library. */ et1310_phy_init(adapter); @@ -377,7 +369,6 @@ int et131x_adapter_setup(struct et131x_adapter *adapter) et1310_phy_power_down(adapter, 0); et131x_setphy_normal(adapter); - return status; } /** @@ -493,9 +484,7 @@ static void et131x_adjust_link(struct net_device *netdev) et1310_disable_phy_coma(adapter); } - et131x_mii_read(adapter, - (uint8_t) offsetof(struct mi_regs, bmsr), - &bmsr_data); + et131x_phy_mii_read(adapter, phydev->addr, MII_BMSR, &bmsr_data); bmsr_ints = adapter->bmsr ^ bmsr_data; adapter->bmsr = bmsr_data;