From: Rajendra Nayak Date: Mon, 29 Jul 2013 05:01:50 +0000 (-0600) Subject: ARM: OMAP2+: Avoid idling memory controllers with no drivers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f66e329d889fce165074f677509d449fc92ff7b9;p=linux-beck.git ARM: OMAP2+: Avoid idling memory controllers with no drivers Memory controllers in OMAP (like GPMC and EMIF) have the hwmods marked with HWMOD_INIT_NO_IDLE and are left in enabled state post initial setup. Even if they have drivers missing, avoid idling them as part of omap_device_late_idle() Signed-off-by: Rajendra Nayak Tested-by: Mark Jackson Signed-off-by: Paul Walmsley --- diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7e..1c82cdedd358 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -842,6 +842,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +851,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n",