From: Ondrej Zary Date: Fri, 6 Feb 2015 22:11:41 +0000 (+0100) Subject: aha1542: rework configuration parameters X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f71429ab535d90806a35bc346adcdebfc8996008;p=linux-beck.git aha1542: rework configuration parameters Remove __setup and introduce separate io, bus_on, bus_off and dma_speed module parameters. Signed-off-by: Ondrej Zary Reviewed-by: Christoph Hellwig Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c index 8c915d721ce0..d15191324b06 100644 --- a/drivers/scsi/aha1542.c +++ b/drivers/scsi/aha1542.c @@ -53,56 +53,30 @@ #else #define DEB(x) #endif +#define MAXBOARDS 4 -/* - static const char RCSid[] = "$Header: /usr/src/linux/kernel/blk_drv/scsi/RCS/aha1542.c,v 1.1 1992/07/24 06:27:38 root Exp root $"; - */ - -/* The adaptec can be configured for quite a number of addresses, but - I generally do not want the card poking around at random. We allow - two addresses - this allows people to use the Adaptec with a Midi - card, which also used 0x330 -- can be overridden with LILO! */ - -#define MAXBOARDS 4 /* Increase this and the sizes of the - arrays below, if you need more.. */ - -/* Boards 3,4 slots are reserved for ISAPnP scans */ - -static unsigned int bases[MAXBOARDS] = {0x330, 0x334, 0, 0}; +static bool isapnp = 1; +module_param(isapnp, bool, 0); +MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)"); -/* set by aha1542_setup according to the command line; they also may - be marked __initdata, but require zero initializers then */ +static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 }; +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)"); -static int setup_called[MAXBOARDS]; -static int setup_buson[MAXBOARDS]; -static int setup_busoff[MAXBOARDS]; -static int setup_dmaspeed[MAXBOARDS] = { -1, -1, -1, -1 }; +/* time AHA spends on the AT-bus during data transfer */ +static int bus_on[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 11us */ +module_param_array(bus_on, int, NULL, 0); +MODULE_PARM_DESC(bus_on, "bus on time [us] (2-15, default=-1 [HW default: 11])"); -/* - * LILO/Module params: aha1542=[,,[,]] - * - * Where: is any of the valid AHA addresses: - * 0x130, 0x134, 0x230, 0x234, 0x330, 0x334 - * is the time (in microsecs) that AHA spends on the AT-bus - * when transferring data. 1542A power-on default is 11us, - * valid values are in range: 2..15 (decimal) - * is the time that AHA spends OFF THE BUS after while - * it is transferring data (not to monopolize the bus). - * Power-on default is 4us, valid range: 1..64 microseconds. - * Default is jumper selected (1542A: on the J1), - * but experimenter can alter it with this. - * Valid values: 5, 6, 7, 8, 10 (MB/s) - * Factory default is 5 MB/s. - */ +/* time AHA spends off the bus (not to monopolize it) during data transfer */ +static int bus_off[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 4us */ +module_param_array(bus_off, int, NULL, 0); +MODULE_PARM_DESC(bus_off, "bus off time [us] (1-64, default=-1 [HW default: 4])"); -#if defined(MODULE) -static bool isapnp = 0; -static int aha1542[] = {0x330, 11, 4, -1}; -module_param_array(aha1542, int, NULL, 0); -module_param(isapnp, bool, 0); -#else -static int isapnp = 1; -#endif +/* default is jumper selected (J1 on 1542A), factory default = 5 MB/s */ +static int dma_speed[MAXBOARDS] = { -1, -1, -1, -1 }; +module_param_array(dma_speed, int, NULL, 0); +MODULE_PARM_DESC(dma_speed, "DMA speed [MB/s] (5,6,7,8,10, default=-1 [by jumper])"); #define BIOS_TRANSLATION_1632 0 /* Used by some old 1542A boards */ #define BIOS_TRANSLATION_6432 1 /* Default case these days */ @@ -792,101 +766,48 @@ static int aha1542_query(int base_io, int *transl) return 0; } -#ifndef MODULE -static char *setup_str[MAXBOARDS] __initdata; -static int setup_idx = 0; - -static void __init aha1542_setup(char *str, int *ints) +static u8 dma_speed_hw(int dma_speed) { - const char *ahausage = "aha1542: usage: aha1542=[,,[,]]\n"; - int setup_portbase; - - if (setup_idx >= MAXBOARDS) { - printk(KERN_ERR "aha1542: aha1542_setup called too many times! Bad LILO params ?\n"); - printk(KERN_ERR " Entryline 1: %s\n", setup_str[0]); - printk(KERN_ERR " Entryline 2: %s\n", setup_str[1]); - printk(KERN_ERR " This line: %s\n", str); - return; - } - if (ints[0] < 1 || ints[0] > 4) { - printk(KERN_ERR "aha1542: %s\n", str); - printk(ahausage); - printk(KERN_ERR "aha1542: Wrong parameters may cause system malfunction.. We try anyway..\n"); - } - setup_called[setup_idx] = ints[0]; - setup_str[setup_idx] = str; - - setup_portbase = ints[0] >= 1 ? ints[1] : 0; /* Preserve the default value.. */ - setup_buson[setup_idx] = ints[0] >= 2 ? ints[2] : 7; - setup_busoff[setup_idx] = ints[0] >= 3 ? ints[3] : 5; - if (ints[0] >= 4) - { - int atbt = -1; - switch (ints[4]) { - case 5: - atbt = 0x00; - break; - case 6: - atbt = 0x04; - break; - case 7: - atbt = 0x01; - break; - case 8: - atbt = 0x02; - break; - case 10: - atbt = 0x03; - break; - default: - printk(KERN_ERR "aha1542: %s\n", str); - printk(ahausage); - printk(KERN_ERR "aha1542: Valid values for DMASPEED are 5-8, 10 MB/s. Using jumper defaults.\n"); - break; - } - setup_dmaspeed[setup_idx] = atbt; + switch (dma_speed) { + case 5: + return 0x00; + case 6: + return 0x04; + case 7: + return 0x01; + case 8: + return 0x02; + case 10: + return 0x03; } - if (setup_portbase != 0) - bases[setup_idx] = setup_portbase; - ++setup_idx; + return 0xff; /* invalid */ } -static int __init do_setup(char *str) +/* Set the Bus on/off-times as not to ruin floppy performance */ +static void aha1542_set_bus_times(int indx) { - int ints[5]; + unsigned int base_io = io[indx]; - int count=setup_idx; + if (bus_on[indx] > 0) { + u8 oncmd[] = { CMD_BUSON_TIME, clamp(bus_on[indx], 2, 15) }; - get_options(str, ARRAY_SIZE(ints), ints); - aha1542_setup(str,ints); + aha1542_intr_reset(base_io); + if (aha1542_out(base_io, oncmd, 2)) + goto fail; + } - return count 0) { + u8 offcmd[] = { CMD_BUSOFF_TIME, clamp(bus_off[indx], 1, 64) }; -__setup("aha1542=",do_setup); -#endif + aha1542_intr_reset(base_io); + if (aha1542_out(base_io, offcmd, 2)) + goto fail; + } -/* Set the Bus on/off-times as not to ruin floppy performance */ -static void aha1542_set_bus_times(int indx) -{ - unsigned int base_io = bases[indx]; - u8 oncmd[] = {CMD_BUSON_TIME, 7}; - u8 offcmd[] = {CMD_BUSOFF_TIME, 5}; + if (dma_speed_hw(dma_speed[indx]) != 0xff) { + u8 dmacmd[] = { CMD_DMASPEED, dma_speed_hw(dma_speed[indx]) }; - if (setup_called[indx]) { - oncmd[1] = setup_buson[indx]; - offcmd[1] = setup_busoff[indx]; - } - aha1542_intr_reset(base_io); - if (aha1542_out(base_io, oncmd, 2)) - goto fail; - aha1542_intr_reset(base_io); - if (aha1542_out(base_io, offcmd, 2)) - goto fail; - if (setup_dmaspeed[indx] >= 0) { - u8 dmacmd[] = {CMD_DMASPEED, 0}; - dmacmd[1] = setup_dmaspeed[indx]; aha1542_intr_reset(base_io); if (aha1542_out(base_io, dmacmd, 2)) goto fail; @@ -901,7 +822,7 @@ fail: /* return non-zero on detection */ static struct Scsi_Host *aha1542_hw_init(struct scsi_host_template *tpnt, struct device *pdev, int indx) { - unsigned int base_io = bases[indx]; + unsigned int base_io = io[indx]; struct Scsi_Host *shpnt; struct aha1542_hostdata *aha1542; @@ -1207,19 +1128,19 @@ static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *i int indx; struct Scsi_Host *sh; - for (indx = 0; indx < ARRAY_SIZE(bases); indx++) { - if (bases[indx]) + for (indx = 0; indx < ARRAY_SIZE(io); indx++) { + if (io[indx]) continue; if (pnp_activate_dev(pdev) < 0) continue; - bases[indx] = pnp_port_start(pdev, 0); + io[indx] = pnp_port_start(pdev, 0); /* The card can be queried for its DMA, we have the DMA set up that is enough */ - printk(KERN_INFO "ISAPnP found an AHA1535 at I/O 0x%03X\n", bases[indx]); + printk(KERN_INFO "ISAPnP found an AHA1535 at I/O 0x%03X\n", io[indx]); } sh = aha1542_hw_init(&driver_template, &pdev->dev, indx); @@ -1248,32 +1169,6 @@ static int pnp_registered; static int __init aha1542_init(void) { int ret = 0; -#ifdef MODULE - int atbt = -1; - - bases[0] = aha1542[0]; - setup_buson[0] = aha1542[1]; - setup_busoff[0] = aha1542[2]; - - switch (aha1542[3]) { - case 5: - atbt = 0x00; - break; - case 6: - atbt = 0x04; - break; - case 7: - atbt = 0x01; - break; - case 8: - atbt = 0x02; - break; - case 10: - atbt = 0x03; - break; - }; - setup_dmaspeed[0] = atbt; -#endif #ifdef CONFIG_PNP if (isapnp) {