From: Addy Ke Date: Thu, 4 Dec 2014 02:49:35 +0000 (+0800) Subject: ARM: dts: rockchip: set dw_mmc max-freq 150Mhz X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=f74ba117dab86b35e15f8b5a8d913145f3e72ca1;p=linux-beck.git ARM: dts: rockchip: set dw_mmc max-freq 150Mhz All of mmc controllers include SDMMC, SDIO0, SDIO1, and EMMC on RK3288 are limited to 150Mhz. It was mainly caused by two reasons: - RK3288's IO pad(except DDR IO pad) is generic, which can only support the max of 150Mhz. - Mmc controller was designed at 150Mhz, and the pressure test by IC team was based on this freequency point. Signed-off-by: Addy Ke Reviewed-by: Doug Anderson Tested-by: Doug Anderson Signed-off-by: Heiko Stuebner --- diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index fd19f00784bd..3aad41d873d3 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -151,6 +151,7 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -161,6 +162,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -171,6 +173,7 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -181,6 +184,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>;